Trouble with 30" HD Cinema Display using Mini DisplayPort to DVI Adapter

I bought a new MacBook Pro and I am having trouble getting the full resolution to work with my 30" HD Cinema Display (purchased in 2007 max resolution 2560 x 1600) using a Mini DisplayPort to DVI Adapter.
According to the specs page, http://support.apple.com/kb/SP581 , the max resolution of the HD external display is supported. Unfortunately the max that I can set it to is: 1280 x 800
Has anyone else had the same issue?
If this isn't resolved I'm likely going to exchange my MacBook Pro for one that can support this display.

So I went and bought the Mini DisplayPort To Dual-Link DVI Adapter as suggested and it seems to work great.
Now the problem that I have is when I open up Apple's DVD player, the screen is blank but I can still hear audio.
If I unplug the display, the movie will display properly. Rebooting with the display plugged in doesn't help either. I also deleted all the DVD players enc setting files so that they would re-initialize but no luck.
Any idea what this problem might be??
Chipset Model: NVIDIA GeForce GT 330M
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0a29
Revision ID: 0x00a2
ROM Revision: 3532
gMux Version: 1.9.22
Displays:
Color LCD:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Built-In: Yes
Cinema HD:
Resolution: 2560 x 1600
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Adapter Type: Mini DisplayPort To Dual-Link DVI Adapter
Adapter Firmware Version: 1.03

Similar Messages

Use Mini DisplayPort to DVI adapter to connect Mac Mini to Cinema Display?

Hi
I have a new-to-me current model Mac Mini and want to use it with my 20" Cinema Display (model A1081).
The Mac Mini instructions say to use the HDMI port on the Mac Mini with a DVI>HDMI adapter cable. I seem to have only a DVI>Mini DisplayPort adapter cable. I'm guessing this will be OK to use, but don't want to fry the system straight out the box
Can anyone confirm it's OK to use DVI>Mini DisplayPort connection to drive the display?
TIA
Jim

Thanks for the reassurance BSteely!
One thing I've seen when rummaging through the forum is a suggestion that with MDP>DVI adapter is problems with display waking from sleep. Short of setting it not to sleep, is there a workaround to wake it up again if it doesn't respond to usual stimuli?
TIA
Jim

Resolution problem with Mini DisplayPort to DVI Adapter

Hi,
I have a unibody MBP 15', running on 10.5.8. I use 'Mini DisplayPort to DVI Adapter' (http://store.apple.com/us/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=Nzk2MDk5OQ) to connect to my external HP LP3065 30' monitor. I get max resolution of 1280 x 800 for external monitor which supports resolution of 2560 by 1600.
This monitor used to work fine with old MBPs, but not with my unibody MBP. What could be the problem? Adapter or MBP?
I am missing high resolutions
Thanks in advance!
Rohit

You have the wrong adapter. The one you have is single-link DVI, which does not support 30" displays. You need the Mini DisplayPort to Dual-Link DVI Adapter:
http://store.apple.com/us/product/MB571Z/A

Mini DisplayPort to DVI Adapter failure misdiagnosed

When I purchased my new MacBook Pro last December, I had to purchase Apple's Mini DisplayPort to DVI Adapter in order to continue using my Apple 20" Display monitor with it.
Turns out the Mini DisplayPort to DVI Adapter dies so I no longer had access to use of my Apple 20" Display monitor
Only the cause of the display's going blank was not clear
I took my MacBook Pro and the 20" monitor tothe apple store Genius bar.
Using my computer and my 20" monitor, the Genius tried making it work with my bower block and with another one in the store. Nothing worked.
What he didn't test was the Mini DisplayPort to DVI Adapter itself to see if that was the problem.
So I bought a new monitor and that didn't work either.
I had to go back to the Apple store Genius bar a second time for them to figure out that it was the Mini DisplayPort to DVI Adapter.
Big PITA (Pain in the A..)
Poor diagnosis the first time gave me 10 days of frustration.
What's with that, Apple?
Steve

I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure. Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous). However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
Hope that htis helps.

Thunderbolt display: devices not discovered after using Mini DisplayPort–to–VGA adapter

I have an interested problem related to using my MacBook Air in clamshell (closed) mode, connected to a Thunderbolt display. The problem appears to be related to moving my MacBook air between my office and my home.
At the office, I use the MacBook Air with an external VGA display, connected via the Mini DisplayPort–to–VGA adapter. At home, I use the MacBook Air together with a Thunderbolt display. An Apple USB keyboard is also connected to the display.
Mini DisplayPort–to–VGA adapter implicated
The following sequence of events causes the problem to occur:
Use the MacBook air (open) together with a VGA display, connected via a Mini DisplayPort–to–VGA adapter (depicted at right);
Put the MacBook Air to sleep by closing the lid, and disconnect the Mini DisplayPort–to–VGA adapter (I am not sure if the order of these two steps is significant—I usually perform them almost simultaneously when packing up my MacBook Air and getting ready to leave the office); and
With the MacBook Air still closed, connect it to a Thunderbolt display with a connected USB keyboard.
At this point, I would expect to be able to wake up the MacBook Air by tapping on the space bar of the keyboard. However, what I have observed is that this does not wake the MacBook Air.
I can wake the MacBook however by moving or clicking a Bluetooth mouse that is paired with the MacBook Air.
At this point, although the MacBook Air is awake, and the display is working, the USB keyboard connected to the display still does not work. This is the problem, in a nutshell.
Unplugging the USB keyboard from the display, and plugging it back in causes the MacBook Air properly to identify the keyboard.
I used Apple System Profiler to save a list of identified devices at two points in time:
Immediately after waking the MacBook Air by moving the Bluetooth mouse (at which point the USB keyboard was not working); and
After unplugging and plugging in again the USB keyboard (at which point the USB keyboard worked fine).
Many devices are enumerated in the second list that are missing from the first. For example:
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378ef, !registered, !matched, inactive, busy 3 (37993 ms), retain 6>
AppleUSBHub <class AppleUSBHub, id 0x1000378f2, !registered, !matched, inactive, busy 1 (37987 ms), retain 6>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378f4, !registered, !matched, inactive, busy 1 (37986 ms), retain 6>
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378f6, registered, matched, active, busy 0 (7 ms), retain 10>
AppleUSBHub <class AppleUSBHub, id 0x1000378f9, registered, matched, active, busy 0 (1 ms), retain 9>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378fb, !registered, !matched, active, busy 0, retain 7>
Apple Keyboard@fe112000 <class IOUSBDevice, id 0x1000378fd, registered, matched, active, busy 0 (112 ms), retain 11>
and many child devices…
Using the Mini DisplayPort–to–VGA adapter appears to be a necessary step to causing this problem to occur. If I merely disconnect the MacBook Air from the display, let it go to sleep, and then reconnect it again, the USB keyboard will work immediately and can be used to wake the computer from sleep.
Some devices are discovered even when the computer is in sleep mode. This is how it should work.
The problem appears to be that when a Mini DisplayPort–to–VGA adapter has been used since the last time the computer was connected to a Thunderbolt display, the MacBook air does not discover devices completely when it is again connected to the Thunderbolt display while in sleep mode.
Can anyone else reproduce this problem?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!

Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!
im not sure what to do next - can anyone help?
im running OSX 10.7.4

Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.

Does Thunderbolt work with the Mini Displayport to DVI adapter?

I just ordered a new 13" MacBook Pro with Retina Display to replace my Mid-2010 15" MacBook Pro. I've been using the Mini Displayport to DVI adapter to extend my screen to an older 20" Cinema Display. From what I can find online, and I'm here asking for confirmation, I should still be able to use the Mini Displayport to DVI adapter with the new MacBook Pro's Thunderbolt port. Correct?

still be able to use the Mini Displayport to DVI adapter with the new MacBook Pro's Thunderbolt port. Correct?
Yes.

Problem: Mini DisplayPort to DVI Adapter with Samsung Syncmaster 2033HD

Hi,
I am using the Mini DisplayPort to DVI Adapter to connect to a Samsung Syncmaster 2033HD
However, I get No Signal with DVI as the Source.
It works when plugged into the DVI slot of the Mac Pro.
Any help would be much appreciated.
Chad

DisplayPort and its variant Mini DisplayPort, use a new and different protocol for communicating with your display.
A properly-functioning adapter can request the DisplayPort use "Dual-Mode", which produces a good approximation of single-Link DVI/HDMI. This is good for resolutions up to 1920 wide, which would include your Samsung (1600 by 900).
Wider displays require a more expensive "active" "powered" converter, to convert DisplayPort to Dual-Link DVI.
So if the display works with a straight DVI connection, but not a DisplayPort adaptation to "Dual Mode" DVI the weak link appears to be the adapter, but you cannot quite rule out the display card.

Mac is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable?

Macbook Pro is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable. 2010 Macbook Pro, just purchased Mini DisplayPort to HDMI Adapter Cable from Amazon. Link here: http://www.amazon.com/Mini_Dis-HDMI-CB6-Mini-DisplayPort-Adapter-Cable/dp/B003OC 6LWM/ref=sr_1_2?ie=UTF8&qid=1406238976&sr=8-2&keywords=mac+to+tv --When i connect both ends of the cable to the TV and to the laptop, the screen will blink, but then afterwards it will not mirror on the TV. I have tried going to display setting but cannot find the arrangements tab. When i searched "arrangements" a message said, "The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer." Not sure how to fix this problem. I have connected this laptop to a TV before, but with a different cable other than the one i just purchased. Any help would be greatly appreciated, thanks.

Found the fix. Still don't know if it was Windows, iTunes, or Norton 360, but this worked immediately for me:
+++++++++++++++++
edgravel
Re: iTunes Store Won't Load, Won't Show Error Message
Aug 13, 2011 4:32 PM (in response to Daedalme)
I found a solution posted from Rodfromnework for PC users. It worked for me and easy to do.
Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
then type in:
Netsh winsock reset
Hit enter, restart PC, open iTunes, go to Store
Hope it works for you too.

Does DVI-to-HDMI work with my Mini DisplayPort to DVI adapter?

Hi,
I have a Mini DisplayPort to DVI adapter and was wondering if I get a DVI-to-HDMI, will I be able to get HDMI output?
If yes, should I get any specific DVI-to-HDMI adapter?
If yes, will it have sound with it?
Thanks.

So which does the community prefer between Dr Bott DVIator and the Apple DVI to ADC? I have the Apple but it is not working, as it is shutting the monitor down without even starting it (soft shut-down). Is this a bad adapter or the result of "stacking" adapters? I have read that it is more common to a bad adapter result.
Thanks.

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
This is a brand new MacBook Pro (15-inch, mid-2012) just received. I suspect that this is a hardware problem as:
The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
The new MacBook Pro powers an Apple Thunderbolt display without issue.
Both MacBook Pro's are running OSX Lion 10.7.4.
The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
All adapters and components (mini-displayport adapters) are Apple retail adapter.
I have tried several external monitors, including my Dell U2412m.
When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode. Using the "Detect displays" button has no effect, even when used multiple times. Rebooting does not help, nor does resetting the SMC or PRAM.
Any other suggestions before I take it to the Genius Bar?

I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure. Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous). However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
Hope that htis helps.

Does Mini Displayport to DVI adapter support analog VGA signal?

I'm just about to buy a macbook pro. Since the MDP (mini displayport) to DVI and MDP to VGA adapters are £20 a pop, I can only afford to get one. Obviously DVI is better in general, but VGA supports more older hardware, CRTs, and the spare VGA input on one of my displays (where the desktop uses the DVI).
What I'd like to know is does the MDP to DVI adapter also support the analog VGA signal on certain pins (like most physical desktop DVI ports do)? If it does, since I have about 3 or 4 DVI to VGA adapters lying around, I can get the MDP to DVI adapter and use the DVI to VGA adapters with it if necessary, but if it doesn't I might be better off getting the MDP to VGA...

No. Unlike DVI, which in the DVI-I configuration has both digital and analog pinouts, DisplayPort (and mini-DisplayPort) are purely digital. Mini-DP to DVI then DVI to VGA will not work. If you look carefully at the Apple Mini-DisplayPort to DVI adapter, you'll notice it's a DVI-D connector - digital pins only.
The Apple mini-DisplayPort to VGA adapter contains a digital-to-analog converter.
So, you'll have to choose. If you want VGA, get Apple's mini-DisplayPort to VGA adapter.

Mini DisplayPort to DVI Adapter is actually DVI-D? *** Apple!

I just purchased a new MBP (and I love it), along with an Apple Mini DisplayPort to DVI Adapter. I figured whatever monitor I wanted to plug into, if it was VGA, I could just stick a DVI to VGA adapter on there. Turns out, this adapter only supports DVI-D (digital only). A little fact that Apple fails to mention in their product page.
What a rip.
That said, does anyone know of a REAL MDP to DVI-I adapter? Do I need to buy the dual-link adapter?

I just purchased a new MBP (and I love it), along with an Apple Mini DisplayPort to DVI Adapter. I figured whatever monitor I wanted to plug into, if it was VGA, I could just stick a DVI to VGA adapter on there. Turns out, this adapter only supports DVI-D (digital only). A little fact that Apple fails to mention in their product page.
They do say that it is for a "digital monitor, ... that includes a DVI connector."
<http://store.apple.com/us/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=MTA4MzU1NTE>
That said, does anyone know of a REAL MDP to DVI-I adapter?
No.
Do I need to buy the dual-link adapter?
If you are going to use a 30" DVI display. It's still DVI-D (but dual-link). It will also work with single-link DVI displays.
For a VGA display you need the Mini DisplayPort to VGA adapter
<http://store.apple.com/us/product/MB572Z/A?fnode=MTY1NDA5OQ&mco=MTA4MzU1NDg>

Mini Displayport to DVI Adapter Problem on Mid-2009 Macbook Pro

I have a new mid-2009 Macbook Pro hooked up to a 20" Samsung 2033sw LCD with a native 1600x900 resolution using a mini Displayport to DVI adapter that I bought off of EBay. No matter what I've tried I can't get anything to display on the external Samsung LCD higher than 1024x768. I tried switching between GPU's and that made no difference. Any ideas.?

Michael, thanks for the reply;
When you open System Preferences/Displays does a second preference panel open up OK on the Samsung ?
Yes, but I can't see it unless I select 'gather displays'. Then it appears on the MBP LCD, and showing the correct resolution - 1600x900.
Is there an Options Tab visible under which you can check 'Overscan' ?
None that I can find. Only display and color tabs.
Is the Refresh Rate set to 60.0 Hertz
Yes, that is what it shows in Refresh Rate.
I also pulled out an older LG LCD that is fairly generic, .e.g. it has DVI in at 1280x1024. Same problem on that LCD ... nothing higher than 1024x768, but this time at 1280x1024 I get major noise and screen distortion. The displayed image is jumping all over the place, but at least there is something displayed.

Mini DisplayPort to DVI Adapter - Monitor not recognizing

I have a new MacBook purchased last month from Apple to replace an older MacBook. I used a Scepter X20 monitor on the previous MacBook with an adapter with no problem. With this new computer, I had to puachase a Mini DisplayPort to DVI Adapter. I plugged it in as I did for the other computer, and the monitor doesn't recognize it at all. I checked the monitor by plugging it into another Mac (older version) with adapter and it works fine. Why will my Mac not recognize the monitor or the monitor recognize that it is connected?

On the very slim chance this might be problem, it happened just last week to another poster and it's happened to me, the mini display port really takes a good shoving into the graphics card. Sometimes it will look perfectly seated in there, but it's not quite.
Aside from throwing that out there, I would think if that wasn't the case, you may be having problems with the adapter itself. The whole mini display port is ridiculous in itself, but the two lessor expensive adapters I bought from Apple worked very poorly anyway. And on Apple displays!
The $99 dollar one Apple sells has a reputation for working the best, but I haven't tried it. There are also devices now, still pretty expensive, that seem to bypass those altogether.
I can't say if some other issue is going on or not, there may be. But just know you're not alone in having display problems of this kind.

Trouble with 30" HD Cinema Display using Mini DisplayPort to DVI Adapter

Similar Messages

Maybe you are looking for