Trouble with ADF portlet :) Connect Database

Hi every body!
Thank so much when you send time care to my trouble.
When I deploy a simple ADF portlet without Connecting Database ==> It run :))
After that, with Connecting Database and Create Bussiness Component from Table
==> It run but Result show in Portal: Could not get mark up ...
I using Jdevelop 11g
Thank again!

Similar Messages

Trouble with ADF portlet :)

Hi every body!
Thank so much when you send time care to my trouble.
When I deploy a simple ADF portlet without Connecting Database ==> It run :))
After that, with Connecting Database and Create Bussiness Component from Table
==> It run but Result show in Portal: Could not get mark up ...
I using Jdevelop 11g
Thank again!

Hi,
wrong forum, try : WebCenter Portal
However, I suggest you provide more information for people to understand the context you are in
Frank

I am having trouble with the initial connection. I have isolated the problem to the cable/ connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

I am having trouble with the initial connection of the apple tv. I have isolated the problem to the cable/connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

There are only two types of HDMI cables (standard and high speed - listen to all 1.2, 1.3 etc etc nonsense they will try to tell in the store) both types will work with the Apple TV.
The cable may be faulty though, have you got another to try, what exactly is happening.

I upgraded Lion recently to 10.7.3. Since that time I am having trouble with my wireless connection. All other devices are fine, but I keep losing the connection since the upgrade.

Recently I upgraded Lion to 10.7.3. Since that time I have been having a lot of trouble with my internet connection. I keep losing the connect and have to go to diagnostics and turn it back on. Is anyone else having this problem?
Thanks, Pat

I'm afraid there are numerous threads on here discussing this problem. I posted in this one earlier that has a couple of suggestions, but the real solution will hopefully be provided in an update from Apple:
https://discussions.apple.com/message/17589686#17589686

I am having trouble with exchange account connection .the vpn connects fine but the exchange account is still showing the yellow light .can anyone help?

i am having trouble with exchange account connection .the vpn connects fine but the exchange account is still showing the yellow light .can anyone help?

I had a similar problem. Here is how I resolved the issue.
1. Remove Network Connect
2. Run Terminal and remove /usr/local/juniper and everything within the juniper directory.
3. Reboot the machine and reinstall Network Connect
4. Test if you can now connect.
During removal, you may encounter permission denied error, you will need to change the permission to 777. For example "sudo chmod 777 nc".

Having trouble with screen saver connecting to my photos?

Having trouble with screen saver connecting to my photos?

I will try that, but isn't Skype supposed to work without headphones? Why does it work with ichat when I talk to my friends with macs?
S

Problems with ADF portlet

Hi All,
I am evaluating Webcenter and Portlets, specifically ADF portlets. I followed Peter Moskovi's article on portletizing an ADF taskflow (http://pmoskovi.wordpress.com/2008/07/18/jsr-301-the-jsf-portlet-bridge/).
This is an excellent demo to guide on creating a portlet from an ADF taskflow. This demo is for old webcenter with OC4J.
I am working on the JDEV 5407 build with Webcenter externsions. The demo is still pretty accurate for Weblogic Portal (WLP).
I was able to run and deploy my portlet app without any problem. It works find in a stand-alone server. However, I run into problems while consuming the portlet in my PORTAL app. I followed the demo and build the consumer app. Everything looks fine, but at runtime, I get "Portlet Unavailable Error".
Has anyone else followed Peter's demo and built portal and portlets with Bulldog i.e. 5407 build? Did you have any issues integrating the portlet in the portal?
I would appreciate any input.
Thanks,
--ajay

Yes! When I say PORTAL app, I was referring to a WebCenter application that consumes the portal.
Thanks for your help in advance.
--ajay

Trouble with PDK portlet event

Hi everybody!
I have a problem with my PDK portlet (Portal 10.1.4).
When rising event with some event parameter more than 1 time, my browser go to strange link like "http://myhost:myport/portal/event/portal/page_path/tab_name".
First time it works fine, it passes parametere to the page, than page passes parameter to omni portlet. When i click it second time i get an incorrect link.
Does anybody now anything about this problem?

It's strange, but in opera it goes to another URL. Something like
"http://host.domain/portal/page/<u>null</u>/page_path?page_params&values"
It answers "Request does not include Database Access Descriptor (DAD) information or the specified DAD is invalid."...
I watched throw the sources of first(before rised action) and second (after) variants of my page and there is another interesting thing i have found:
First time it has no information in omniportlet. That's cause no parameters passed there. So if we watch the source we'll find nothing.
Second time <FORM> named like "form_11038_OMNIPORTLET_11722825_0" appears. It contains text and 1 href. That's cause one parameter were passed.
But it has no </FORM> tag at all !!!!! so it identifies form of my portlet as a part of itself !!!
So this new form (omniportlet) causes the error.
Can anybody help me with this error??? Or it's oracle bug???
PS. I apologise for my english.

I'm having trouble with my iphone4 connecting to my home wifi - nothing has changed so, I need help! Thx

I'm having trouble connecting to wifi. It doesn't recognize any of the networks I usually connect with, including my own. Can anyone help?

Try reboot your router, update router firmware from the manufacturer website.
In iPhone's Settings > General > Reset > Reset Network Settings.
Try reconnect again to your Wi-Fi.
Lastly, do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.

Trouble with Remote Desktop Connection to work PC

Note that I am trying to log into my work PC from my mac at home. My company recently announced we could log in from home with a mac into our work PC. they can't get it to work so I thought I'd try here. We use a mobile site on Safari to obtain a network connection - it launches a program called network connection and I appear to have that network connection (although very little data is being sent and received). I am then supposed to launch a program called Remote Desktop Connection (this program was installed from steps I ran through the first time I logged in through the mobile site, it is version 1.0.3), but when I do, it will not connect and the error message is that remote connection is not enabled, network is too busy, etc). However, the guys at the support desk using PCs can log into my work computer. The only info that's mandatory to input on the Remote Desktop Connection is my work computer name. I don't think this is the issue, because if I purposefully use an incorrect name for my work computer, the error message is different, stating it can't find my (work) computer. I also installed the most recent version of Java for 10.3.x The only issues I can think of are a) this won't work with 10.3.9, although I doubt this is it as the Remote Desktop Connection program appears a few years old, OR there is some firewall issue on my mac. I doubt that this is it, as I assume the mac's firewall protections are to prevent others from remotely logging into my mac, not prevent me from using my mac to remotely log into my work PC. Also, I don't use any third party firewall or other protection stuff on my mac other than whatever comes stock. if you've read this far, thanks, and any comments appreciated! am trying to log in using my dual 1.8 g5 with 1.5g memory using 10.3.9

Are you by any chance with a major retailer? My company just did the same thing. We used to connect via a Virtual Drive connection, but they took that away and went to RDC.
I had problems at first logging in as well. It was acting as if my password was wrong, but I knew that wasn't the case. I finally typed the password in the UserName area and found the problem!
I had two special Characters followed by a capital letter. For instance !@Axxxxxxxx. When I typed the password, I would push and hold the 'shift' key for the first three letters. When typing that in the "user name" field, it showed as !2axxxxxxx. You have to release the 'shift' key and repress it for each letter.
I hope this helps you!

HP Deskjet 3520 e-All in one printer trouble with scanning network, connection and very slow print

Dear all
I bought two days ago HP Deskjet 3520 e-All-in one printer serie, but i have some really bad issues with the scanner! I have searched on the internet and i couldn’t find anything to solve the problem.
I have installed the printer according to the book of the printer, so everything did go well(i think), except that i can’t connect the scan to my computer, a Mac OS X (i am connected with the printer). I get directed to the website where i can connect the scanner, but every time i try to connect it with wi-fi, i get two notification, one from my computer (from HP Itility (Dutch) program) that the connection is off and second from the website that i have to make sure that i’m connected with internet (which i am) and to check the IP address if it is the same with my computer (which is the same).
Obesely something did go wrong, but i can’t find the problem.
Beside when its copy or prints a document (no matter how many pages) it’s very slow. It takes 10 -15 minutes till the printer starts. Has it something to do with the problem i’ve got with the scanner or is the printer always so slow? Because the very first time, when i installed the printer, it printed very fast.
By the way i also print the test-results to check if there is a problem, but according to test-results there are no problems at all.
I hope that someone recognize this problem and can help me to solve it.
Regards,
Esra

Hello chesterpascual,
Welcome to the HP Support Forums!
Regarding the Deskjet 3520 and the error to use setup cartridges, you will need to call HP's Technical Support to see about sending some to you.
Click here to locate the contact information.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Trouble with adding images from database

So I have created this nice little table and want to populate it with an test row and I cant seam to get it to work. I have neber delt with BLOB before and maybe its with that. Well here is the sql code that I am using
CREATE TABLE Product (name VARCHAR2 (60), price INTEGER,discrip VARCHAR2(100),photo BLOB, quantity INTEGER)
INSERT INTO Product VALUES ('Inuyasha Final Act', 39.52, 'Join Inuyasha and Kagome as they continue their quest to find the jewel of the four souls and defeat Naraku.', 'INUFinalAct.JPG');
Did I not put in the images right? how should I load this into the database?
It creates the table nice and dandy, but it will not populate the table at all. What am I doing wrong here?
Thanks for any help

850673 wrote:
Thanks for the advice I went and changed thing around a bit
CREATE TABLE Product (name VARCHAR2 (60), price INTEGER,discrip VARCHAR2(500),photo BLOB, quantity INTEGER);
INSERT INTO Product(name, price,discrip,photo, quantity )
VALUES ('Inuyasha Final Act', 39.52, 'Join Inuyasha and Kagome as they continue their quest to find the jewel of the four souls and defeat Naraku.', 'INUFinalAct.JPG', 15);
This seams to have no SQL error, but when I try to put it into the oracle server, it gave this problem
ERROR at line 2:
ORA-01465: invalid hex number
Is this because it does not know where the image is? If that is so how do I get it to know where the image is?It's worse than that... Oracle doesn't even know it's an image.
All Oracle knows is that you have a column of BLOB datatype, which can be used for storing any type of binary data, not just images, and you are trying to insert something of datatype VARCHAR2 into it (a string with some characters in). That string may be the name of the image to you, but to Oracle it's just a string.
Follow hoek's link for good examples of how to do it, as it involves you using other functionality first to read the binary file from the file system into a BLOB variable, before you then insert that BLOB variable into your table.

Trouble with Application Server connection/deployment

This is the output I get when testing the remote connection I set up:
C:\Program Files\JDeveloper\jdk\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Program Files\JDeveloper\jdev\lib\oc4j_remote_deploy.jar http://costanza:1810/Oc4jDcmServletAPI/ ias_admin handmodel1 listApplications F:\ora9ias
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command listApplications F:\ora9ias UNDEFINED UNDEFINED UNDEFINED
Command = LISTAPPLICATIONS
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = b3e9da25826746e393a2ab6e17c30b9b
Please, wait for command to finish...
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=b3e9da25826746e393a2ab6e17c30b9b
Checking command status
HTTP response code = 500, HTTP response msg = Internal Server Error
#### HTTP response is NOT ok
Waiting for 30 seconds and trying again...
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=b3e9da25826746e393a2ab6e17c30b9b
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
Command output:
BC4J
Closing connection to Oc4jDcmServlet
DCM command completed successfully.
Output:
BC4J
Does this look normal? When I try to then use this connection for deployment of War file I get this output:
---- Deployment started. ---- Oct 30, 2002 11:27:05 AM
Wrote WAR file to C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.war
Wrote EAR file to C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.ear
Invoking DCM servlet client...
C:\Program Files\JDeveloper\jdk\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Program Files\JDeveloper\jdev\lib\oc4j_remote_deploy.jar http://costanza:1810/Oc4jDcmServletAPI/ ias_admin **** redeploy F:\ora9ias C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.ear webapp1 Oc4j_home
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy F:\ora9ias C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.ear webapp1 Oc4j_home
Command = INVALID_COMMAND
#### Invalid command: redeploy F:\ora9ias C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.ear webapp1 Oc4j_home
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
#### Could not send command to Oc4jDcmServlet
Closing connection to Oc4jDcmServlet
#### DCM command did not complete successfully (-6)
#### HTTP return code was -6
Exit status of DCM servlet client: -6
Elapsed time for deployment: 5 seconds
#### Deployment incomplete. #### Oct 30, 2002 11:27:09 AM
Anybody know why this thing doesn't work.

Hi. I dont know obout CS on UNIX, on windows CS uses port 1090 and HTTP script ContentServer/ContentServer.dll
The web page is
http://server:1090/ContentServer/ContentServer.dll?serverInfo.
It's on Windows....
Also read this Note 586895. -->
      New access paths and compatibility with Windows systems
              The "/ContentServer/ContentServer. dll" and "/Cache/CSProxyCache.dll" paths have since been established as fixed default values for the Content Server/Cache Servers for Windows.
              The module access in the Apache Web server is not restricted to actual paths for program files. Using <location> tags, you can determine any (sub)paths that are to be used to access a module. These tags are entered in the "httpd.conf" file within the relevant module configurations. You can also define the clients allowed to access this "location" within a <location> tag with an Allow/Deny clause.
              To be able to continue using the Windows paths proposed in the SAP system, these Windows paths are installed as compatibility tags.
              In addition to this, you can use the new, essentially shorter paths "/sapcs" and /sapcsc" to access the SAP Content Server and the SAP Cache Server.
              The "Modifications to httpd. conf" attachment to the installation manual contains a list of all of the access paths delivered.
Regards.. Award if helpful.
Edited by: Sergo Beradze on Mar 11, 2008 4:37 PM

Trouble with setting SLD connection of Preview J2EE + ABAP NW04s

Hi,
I am trying to connect both J2E and NSP to SLD. J2E has connected correctly.
In visual admin, I created new entries in Jco RFC provider, (SLDAPI_J2E) the gateway/host = abap system.
In Sm59 I created new connection to with the program name = SLDAPI_J2E and the connection looks good.
But RZ70 will dump regardless of any entry I try. "Could not open rfc connection"
Any idea?
Thanks

Good morning,
We have exactly the same problem.
Have you find solution ?
Regards, Emmanuel

Trouble with Content Server connection

I am having an issue with content server on Unix. I'm finished with content server install and need to connect my ABAP system to it via CSADMIN. But when I first enter CSAdmin, I give it my host and port. What is the unix http script name for the default install??? Only the Windows name - ContentServer.dll - is populated? What is the web address to get to the content server?
http://<host>:<port>/???????
Do I need to do something with OAC0 and SICF first, before going to CSADMIN. The guide does not mention anything?
Thanks for your replies!
Jeff

Hi. I dont know obout CS on UNIX, on windows CS uses port 1090 and HTTP script ContentServer/ContentServer.dll
The web page is
http://server:1090/ContentServer/ContentServer.dll?serverInfo.
It's on Windows....
Also read this Note 586895. -->
      New access paths and compatibility with Windows systems
              The "/ContentServer/ContentServer. dll" and "/Cache/CSProxyCache.dll" paths have since been established as fixed default values for the Content Server/Cache Servers for Windows.
              The module access in the Apache Web server is not restricted to actual paths for program files. Using <location> tags, you can determine any (sub)paths that are to be used to access a module. These tags are entered in the "httpd.conf" file within the relevant module configurations. You can also define the clients allowed to access this "location" within a <location> tag with an Allow/Deny clause.
              To be able to continue using the Windows paths proposed in the SAP system, these Windows paths are installed as compatibility tags.
              In addition to this, you can use the new, essentially shorter paths "/sapcs" and /sapcsc" to access the SAP Content Server and the SAP Cache Server.
              The "Modifications to httpd. conf" attachment to the installation manual contains a list of all of the access paths delivered.
Regards.. Award if helpful.
Edited by: Sergo Beradze on Mar 11, 2008 4:37 PM

Trouble with ADF portlet :) Connect Database

Similar Messages

Maybe you are looking for