Trouble with HD videos on Satellite M70

HI,
I recently bought a M70-208. It seems that I experience trouble with HD video both with VLC and WMP. For example, while playing the demo video of "HDtoGo", the flow is very slow. Other non Toshiba notebook that I'm using for my job is playing this video smoothly, despite its lower configuration.
I tried different combination of Energy management, but it still the same. I can't understand what's going on.
Apart from that, this notebook makes me happy (6900 point at 3D mark05).
Thanks for helping me.

Hi
Maybe is my English not so good but what you mean under flow? Is there any kind of bucking while video plays?
Maybe some application in background occupied the CPU and because of that the video doesnt run well. Try to check it.
Anyway, as you said this unit has very good value on graphic test. Friend of mine has M70-257.
Bye

Similar Messages

Having trouble with the video function..

I just purchased the 60GB ipod photo. I'm transferring music files easily. However, I'm having trouble with the video function. I've loaded Itunes 6, reloaded the original setup disk, and have loaded the latest updates for the unit. I can download movies from the itunes store and save them to my library, but I cant seem to transfer the video files to the ipod. Ive reinstalled itunes and the update 6 with no success. After syncing the ipod it only shows the music files even after all that Ive tried. Additionally, there is no evidence of the video function on the main menu after the update attempts. Can someone tell me what I'm doing wrong? I'm eager to get past this problem so that I can start tranfering personal movies and video files.

You Have an iPod Photo, You do NOT have a 5th Generation Video iPod. Get it? You need the 5G model to play video.
If the salesman told you it was the 5G model he lied, was ignorant or both. If video is important or if thats what you thought you were getting you will need to return your 4G iPod photo for new iPod.
Rotsa Ruck!

I am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

i am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

Looking up your camera online, I found it is capable of 1920 x 1080 Full HD 60p Recording. It's the 60p (60 frames per second Progressive) that's the problem I think. iMovie '11 will do 60i (Interlaced). You might need to convert it from the format the camera currently uses into another format to get it into iMovie. Read more about it on this link here: How to import 60p footage From that message thread comes the recommendation to use ClipWrap to convert the camera's video clips now that they are in 60p:
Tom Wolsky
Re: How to import 60p footage
Aug 17, 2011 12:40 PM (in response to ptburnett68)
Use ClipWrap to rewrap to QuickTime. Import the files. Edit in either 59.94 or 29.97. The latter if you want to use the high frame rate for slomo

Trouble with large videos

I'm wondering if anyone has had any trouble with large videos in their stacks? We are using a clip that weighs in at about 311 MB and my art director is reporting some trouble getting it into InDesign.
A shorter clip weighing in at 170 MB is working just fine.
Any ideas?

That is a pretty small file for being 7 hours long.
Have you tried using interpolation and converting the hours, seconds and frames into all seconds or does that defeat the object of the composition? I have a bunch of movies taken with the same camera and some do not provide a timecode. Has been an issue for me for a while. In X.6.+ even apple created comps cause the finder and QC to crash. You wil get a lot more kowledgeable people over at http://kineme.net

Trouble with ichat video

I dont know if this is any where else in the forum but i am haveing trouble getting a video chat to work. The person im trying to chat with has a macbook as well. at first we had to try a few times to get it to work and then we did. when we got back on after ending our first one 10 mins ago we couldnt get it to work.
Why would this happen if we had already gotten it to work? it says that it failed to connect because i didnt respond although i clicked accept. when i would do that it would say connecting video with _ and then give an error note after a few seconds.
If anyone could help that would be great
-Emily
Macbook 2Ghz Intel Core Duo Mac OS X (10.4.10)

Hi
First have you set the Quicktime streaming setting, goto sys prefs/quicktime/streaming/streaming speed, set to 1.5mbps(dont use automatic)
In ichats prefs click on video and change bandwidth limit to NONE.
Restart iChat.
Tony

Trouble with Playing Video Files

I have a new macbook pro and I am having trouble playing video files. It seems like it is having trouble with the size of the file. I need to get this figured out because I will be doing a lot of work with video including using final cut to edit. Any suggestions for me to speed up video play?

Any suggestions for me to speed up video play?
Max out your ram.
It seems like it is having trouble with the size of the file.
Please clarify.
Are the videos home made, downloaded from the net, browser videos, streaming videos, etc.

Having Trouble With 25fps Video in CS4

Whenever I try to play something recording in a PAL format (1080p25 to be precise). I've had sure the preset is set on 1080p25 and I have no trouble playing the video on programs that aren’t Adobe Premiere. When I try to play it in Premiere it might stick on one frame for a few seconds, then show about 1 frame every 3 seconds, then maybe stop for another 7 seconds.
Anything that’s in a NTSC framerate plays fine, but the only HD camera I have only records in 25p or 50i, so using 29.97fps isn’t an option. What’s going on here and what am I doing wrong?

function(){return A.apply(null,[this].concat($A(arguments)))}
Ann Bens wrote:
What camera are you using and what are your pc specs?
The camera is a Canon Legria HFM31. Not sure about the PC specs, it's a laptop my school provided. What do you need to know?
Okay, I tried the same footage with (the godawful) Windows Live Movie Maker, and it's struggles to play the video for the first 10 seconds but after that I get a smooth frame rate and can pause, play, skip ahead, etc without any issues.
I tried with an interlaced video, and its fine in Adobe Premiere! What's going on here? Does Adobe just not like PAL prog scan videos?

Premier Pro CS4 having trouble with HDV video

Recently I had a video shot with an HD camera and use the HDV codec. I couldnt even open these files in Adobe Premier - until someone was able to install Final Cut Pro on the computer (assumin FCP came with some sort of codec). I just dont know how to use final cut pro - but that program seems to have no problems with this video file.
So im trying to edit it using Premier PRO - but the video is very delayed - almost in slow motion. Does anyone know what i can do? I really need to make some simple edits to this video and then render it out as an FLV - i dont have time to learn final cut pro before this needs to be done.
Any information or tips would be greatly appreciated.
Thanks,
amanda

Amanda,
It would appear that you are on a Mac. I'm not sure if G-Spot will run on a Mac, unless you also have some form of Windows system on it, i.e. Bootcamp, or similar. You might get info on this from the G-Spot site.
If it will not run, you'll be missing a wonderful tool. Instead, open QuickTime Player. Load one of these files. Hit Ctrl-j (Command-j on the Mac, I think) to get to the Properties screen. Look there to find out the CODEC's used in these files. Let us know about them. I do not know FCP, but it probably has a built-in Properties utility, that might yield more and better info on the files, that QT Player will. Would be worth a look and a try.
You are probably correct that it's a CODEC issue and that FCP has access to the proper one. It could well be that PrPro cannot even use that one, but until we find out what it is, we'll not know.
BTW, what make and model of camera?
Good luck,
Hunt

I am having trouble with a video. I have tried to copy it to a flash drive because it is too big to fit on a DVD, it says it is too large for the volumes format. Please advise.

I have done many DVD's for seniors for graduation so I am familier with Imovie. I have just finished a projec that is a combination of video, music and stills. I shared it through idvd. Now I can't burn it to a dvd because it is too large. It is too big even for a two sided disk. I have researched it and i find that blue ray would be big enough. Does apple offer blue ray burner? if so, what is the cost? I tried another route and took my external hard drive to copy it to a PC. there computer wouldn't recongize my drive. I am assuming it is because it is formated for apple. I tired copying it to a flash drive and and it says that it can't be copied because it is too large for the volume's format. Suggestions? PLEASE!!!!!

Could the video be too big because of using too high a resolution? 480p is sufficient for a DVD. the thread at:
https://discussions.apple.com/thread/5868958?tstart=30
may be of help.
Apple does not support Blue ray - you have to use a thrid party application like Toast.
To transfer the video to a PC you need a FAT-formatted hard drive (or of course a sufficiently big memory stick).
You could also go via a network, via the cloud (eg Dropbox) or with 'Wetransfer" or similar.
Geoff.

Trouble with loading videos - Manually manage music and videos not supported now with iOS5 and a 1st gen iPad?

Since updating my iPad 1st gen to iOS5.0.1 videos don't get loaded properly into the Videos app.
On the Summary page in iTunes of my docked iPad, I have always checked the box for "Manually manage music and videos".
I have my reasons for doing it this way, but that's for another thread perhaps.
The problem is that when I load a video to my iPad this way - by simply just dragging it from the desktop and onto the iPad, under Devices in iTunes - it copies/updates, and shows up on the iPad like it always has before iOS5. But now, with iOS5, when I undock, it can't be found anywhere within the Videos app on the iPad. The only way I can find it is to do a Search, which seems to find it, but when I click it, a different video plays - the first video in the Movies list in the Video app. Dock the iPad again, yes the video is there, according to iTunes, but no way to play it once iPad is undocked.
My suspicion is that with iOS5 you are no longer able to use the "Manually manage music and videos (Mmm&v)" that you will be forced to run everything through iTunes - and probably iCloud. I've unchecked the Mmm&v box, and get prompted with "Are you sure? - All existing content on the iPad will be replaced with content from your iTunes library". READ - "Rebuild your entire video and music collection, and this time run it all through iTunes. Welcome to iOS5. Have a nice day or two wasting your time rebuilding your entire video and music collection. Don't fight it. Use iTunes for everything! Until we finally make iTunes a decent piece of digital media management software, then you'll have to do it all again."
Okay, rant over - Anyone out there with running iOS5 on a 1st gen iPad with the Mmm&v option checked and able to load a video manually (not through iTunes)? Any other thoughts?
Thanks

Yea, i managed to fix my issue in a wild fashion way But I DONT suggest it to anyone.
I like to hear why it happened after upgrading iTunes and if there is any peaceful solution.
Bythe way, here is how i fixed it :
1-i checked "manually manage music and videos" checkbox and clicked on "Sync" button
2-It showed a threating message that it will erase my music and videos ,......
3-I clicked on OK button and let iTunes do any thing she said , but the second it started to delete my treasures from my iphone, i disconnected my phone by pulling USB cable.
Now i have my musics and videos untouched and got that Option enabled again and i can manage my Music/Videos and Books manually.

Trouble with capturing video from Firewire

We're having some trouble capturing video using Final Cut Express HD. We purchased a new Apple FireWire, but are still being told nothing is being read. The camera we're using is a Canon HV20 High-def cam. Any ideas would be appreciated. Thanks!

Start here :
http://www.fcpbook.com/Video10.html
This link may also be helpful:
http://discussions.apple.com/thread.jspa?messageID=6263264&#6263264

Trouble with rented videos

With rented movies I have had two that stop at some point while watching for the first time then won't move past that point and finally video screen goes black any ideas?

Here are rented movie questions and answers, and descriptions of how it works by country.
http://www.apple.com/support/itunes/movies/

I am having trouble with a video program not connecting to my web cam. My computer is a 64 bit

I am using My Video Talk suite to make videos. I have used it before with this computer and it worked fine. My computer is a 64 bit. I recently downloaded the newest version of Firefox and now my video suite does not recognize my web cam and I cannot produce any videos. My Video Talk works in 32 bit I believe.
Do you have any answers to my problem?

Could the video be too big because of using too high a resolution? 480p is sufficient for a DVD. the thread at:
https://discussions.apple.com/thread/5868958?tstart=30
may be of help.
Apple does not support Blue ray - you have to use a thrid party application like Toast.
To transfer the video to a PC you need a FAT-formatted hard drive (or of course a sufficiently big memory stick).
You could also go via a network, via the cloud (eg Dropbox) or with 'Wetransfer" or similar.
Geoff.

Trouble with watching video

Thank you for your informative statement.
However, I got some different problem. When I watch the videos, I could not have original colour. It seemed some RGB components had been biased and then the green color was dominant. What's happening?
If you want to contact with me, you can use this address: [email protected]
Thank you for your attention!

I answered your other thread. Locking this duplicate one.

Trouble with playing videos (audio!)

Hi, I recently bought a new iPod and wanted to upload some videos, but somehow iTunes doesn't acknowledge the fact that I want to import them. Surprisingly it happens only to certain movies (usually the longest ones). And then there's the other problem with audio - when I convert the selected movie to fit the iPod and whatnot, the sound magically disappears. Both in iTunes and the iPod.
HELP anyone? Please?

QuickTime Control Panel / Advanced tab.
Check the box to use "Safe mode" for the video.
Quit and relaunch QuickTime Player and try the file again.

Trouble with HD videos on Satellite M70

Similar Messages

Maybe you are looking for