Trouble with no service (iPhone6 8.0.0 and 8.0.2)
I got my in the mail yesterday everything worked fine except I had no phone service. I upgraded to 8.0.2 still no service. I've read online and have reset EVERYTHING, restarted my phone a dozen times, and restored to factory settings using iTunes. Also I live in the states.
You mean the people that that just 'send report to apple' and get on with it I presume? Like me most of the time. Well, as we all know, there are so many variables. The fact is, as far as I'm concerned right now is that Logic 8.0.1 needs some serious work. I can for sure say that I have noticed a snappier response as far as the graphics go. But as for overall performance, it needs an update. I'm trying not to be negative toward your positive thread however, do a search on overloads and, well, they will unfortunately outweigh this thread for sure. It does make me wonder mind how the price of a pro app like Logic tumbled when apple released the Logic studio box. It's £100 cheaper than Cubase 4. It just makes me think garage band ultimate edition right now.
Similar Messages
-
Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish.
Any other ideas?Most likely you are suffering from a bug in iWeb that doesn't let you publish websites if an image you have added to your site begins with space. You can either search for that image and remove it.
<Link Edited by Host> -
As stated I'm having trouble with my computer, I boot it up and within a few minutes it freezes and I have to restart it, I tried updating it to the latest mavericks but it won't finish the installation it's stuck at the end, what can I do to fix this? I need it for homework tonight.
Crowntheme,
you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it still freeze after a few minutes? -
Help!??? I am having trouble with PS CS-6 displaying/ producing/ saving grainy pictures when import NEF files!!!
Hi all,
When I import all NEF or RAW files into CS6 from Bridge and Camera Raw from the Nikon D200 and D5000, they become grainy/ pixelated. However, RAW files from the D800 did not have problem. I set the Color Space in my Nikons to AdobeRGB, in PS Camera Raw 8.5 to AdobeRGB, in PS CS-6 ColorSpace to AdobeRGB, and Save As Jpeg with Max quality (12). When comparing between CS-6 produced file and the original, I can see a big drop in quality and the picture become grainy and pixelated. What can I do to make this right? Any help/ suggestion is appreciated.
Thank you!
HNCan you show us a screen-shot of the raw in Camera Raw that shows this noise, or if you only see it in the saved JPG, then show us a side-by-side of the raw in Camera Raw and the JPG? Show the same area of the photo and zoom to 100%.
It is normal for raw photos to have grain but you can mostly remove it with the Luminance Noise-Reduction sliders in the Detail tab of Camera Raw.
The amount of grain depends on the ISO sensitivity setting on the camera. -
Trouble with Time Machine (runs constantly). Erase and install?
Trouble with Time Machine (runs constantly). Tried re-installation (equivalent of archive install) of Snow Leopard. Time Machine still unable to complete a back-up. Erase and install recommended at Genius Bar. Have backed up data to external HD using Super Duper. Should be a bootable backup. Last successful backup through Time Machine was 6/1/11. Not sure if I can access this back-up if I erase and re-install.
Computer shipped with Tiger (7/2007). Have original disks. Now running Snow Leopard. So: erase HD, install Tiger, then update to Snow Leopard? Start-up from Tiger disks does not appear to work (starting up holding "C" key). Suggestions? Want very much to transfer data to new iMac, but do not want to carry bugs forward. Very nervous about erasing HD. And have the questions above about reinstalling system software.
Advice desired! Thanks.Well if you can hold option and boot off the Superdupes clone and it works fine then you should be set to do what you need to do to the original boot drive.
Disconnect all drives and c boot off the Snow Leopard install disk, use Disk Utility to Erase > format HFS+ journaled your internal boot drive.
Quit and reinstall OS X Snow Leopard, setup (do not use Setup/Migration Assitant!) and update to 10.6.8
When you setup the new install, use the same hard drive name and user name as you did before.
Now the free iLife that came on the Tiger disks you won't get naturally, but you can pick them off the disk with the shareware program called Pacifist.
install your programs from fresh sources, this way you don't get the "crap" from the older setup.
Once your machine is up and going. Hook up the clone and transfer your user folders over manually. With iTunes just replace the whole folder. Because you kept the same user and boot drive name as before, the playlists should be fine.
Once your all peachy, take the opportunity to clone this new setup to a external drive, label and disconnect.
Make another clone for day to day, or week to week clone updates and your just a hold option boot away for recovery.
You know Superdupes and Carbon Copy Cloner both have auto-scedualing/updating ability, so you can leave them plugged in and it will perform a update so your clone stays fresh and recent.
But you should keep a clone timed back about a couple of weeks back just in case you install something bad and don't learn about it right away. -
Hi I am having trouble with iTunes! Randomly when I click on a song in iTunes it changes the song title to time after time and the artist is pink.
I could click on 4 songs and they will be normal but then the 5th one will change the info to time after time.
I haven't done anything different or new, it started doing it all of a sudden, well that I have noticed anyway. Please help.Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
- To use the TC as a router or as an external HD.
The difference between WPA and WPA 2 are:
- They are two kinds of internet connection.
WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
If you need any help or if you find some difficult setting up it you can contact Apple Support.
I am sure that they can help you with that.
I am sory for the delay. I holpe that you solve your issue. -
I am having trouble with syncing my iPhone to another computer because the computer that my iPhone is currently synced with is not working
You can sync/manually mange iphone with one and only one computer. If you sync/manually mange to anther, then it will erase the current content and replace with content from the new computer.
What "trouble" are you having? -
Trouble with Update snow leopard 10.6.8 and 10.6.7
Hi,
Since one week, I have trouble with snow leopard.
My child has shut down our imac roughly with the on/off button. So after the restart and before the blue screen the display
is frozen with crazy pixel. I have to look for information for a week, tried all the reset (alt cmd P R , reset smc, safe mode etc ...)
After that I' installed all the OSX snow leopard with the DVD with the 10.6 version
This version is ok and the imac works fine but if I'upgrade this version to 10.6.8 with the combo package
I have the same problem : the display is frozen with crazy pixels
And If I' upgrade with the combo package 10.6.7 somme windows are grey and the menu is grey, the apple menu is black
The fonts are bad.
Before all these installation, I perfromed a smc reset, four times nvram reset, erase hard drive and after
that installation of snow leopard.
The Safe Mode works. Hardware test is OK . disk is Ok ( I used the disk utility),permission is OK
Do you have a solution
ThanksHello,
Are you using software Update or getting it directly?
Try re-installing the big 10.6.8 Combo...
http://support.apple.com/kb/DL1399
Repair Permissions afterwords, reboot.
If that doesn't do it, it sounds like a video card problem, have you blown the dust out lately?
Boot off your *original* Install Disk while holding down the *d key*, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT. Some Discs have it inexplicably on Disc #2. -
My Macbook (13 inch 2008) running OS 10.6.8 is having trouble with some applications. Word will not even open. I cannot print from text edit or Preview or Adobe. Excel sometimes opens but very slow. What could be wrong? I have repaired permissions, used an antivirus program, deleted some old MS fonts, and still no change. I have 1 G RAM and there seems to be plenty available and I have 50 G of hard drive space empty.
Well, first 1gb of Ram is not plenty. It's the absolute bare minimum just to run OS X 10.6.8. The MS Office applications are ram hogs also. I would recommend three things.
1. Get more ram.
2. Reinstall and update your MS Office applications.
3. Reinstall Snow Leopard.
If you're not familiar with Activity Monitor you might have a look at this link and you'll be able to judge your ram situation a little better.
http://support.apple.com/kb/PH5149 -
Watching movies from iTunes and Netflix, the subtitles shows yellow, too small and into gray boxes! I'm having this kind of trouble with my iPad also.
Solution found.
I am a Vodafone customer and installed the Vodafone app which asks you to turn off wifi connection on installation as it needs to communicate with their servers over 3G.
After restoring the iPad via iTunes this is the only app that I did nor re-install and seems to be too much of coincidence that while in full screen view watching films my wifi is switched off and 3G data connection is established 10 - 15 minutes into a fiilm and my data allowance gets eaten up!
I would also get push notifications from Vodafone saying "my daily data usage was almost used" with this app installed.
Have tested and on 3rd time watching sky go still wifi is on after 30 mins.
DO NOT INSTALL VODAFONE APP FROM THE APP STORE. -
Is anyone having trouble with internet on the new macbook air and an old modem?
Is anyone having trouble with internet on the new macbook air using an old modem?
I live in NYC and have an old modem/router and keep getting kicked off the internet. I have time warner as my internet provider.Hello there adell723,
I suggest taking a look at this article we have named Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6 found here http://support.apple.com/kb/HT4628?viewlocale=en_US.
Symptom: The network connection drops unexpectedly
Your Mac may not not stay connected to your Wi-Fi network reliably.
Your Mac may stop accessing the Internet during use.
Solution
Use these steps if your computer disconnects from its Wi-Fi network unexpectedly.
Check your range to the Wi-Fi router and reduce the effect of interference.If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
If you have Mac OS X 10.8.4 Mountain Lion installed then I would recommend using Wireless Diagnostics tool which is on your computer already.
Here is the article for it and how to use it to assist with wifi connectivity issues.
About Wireless Diagnostics
http://support.apple.com/kb/HT5606
Cheers,
Sterling -
4S trouble with ringtones
Hi,
Thanks for your response. I did restore to new location, drive J, and chose "maintain folder structure". So, the catalog and a complete set of my photos was copied to the new external drive J. However, the catalog is still linked to the original set of my photos that are still on drive M. Any ideas?
JRD -
Trouble with Windows Service Pack 1 ?
I am using
Adobe CreatePDF, and because I am using it with a musical notation software program
, Finale, I have to use the Adobe Desktop Printer, to convert the file
s. This has worked very well for a couple of months but, the other day I attempted to us
e it and it doesn't work. I contacted Adobe, through their online chat room and a
fter trouble shooting my computer, the tech said that the Adobe Desktop Printer does not work
now with Windows 7, Service Pack 1. They are working on the problem. Has this been addressed on the forum yet? I'm sorry, but I couldn't find it if it has. Anyone else having this problem. It's really put me in a bind. How are we to know when the issue has been addressed?
Thanks.I'm sorry, in the Subject Window, I neglected the "7". It's Windows 7, Service Pack 1.
Thanks. -
Following the support steps for uninstalling and reinstalling iTunes on a Windows 7 (64bit) computer, the provided bullet points for additional steps requests to uninstall 'program files (x86)/common files/apple'.
When attempting to delete this 'apple' folder an error message occurs saying 'the action can't be completed because the folder or a file in it is open in another program'.
Looking in this 'apple' folder there are the folders and files for Internet Services & Windows Migration Assistant, and in sub-folders things like iCloud & Photostream, etc. Makes sense the error would occur given this folderinstall given this situation?
Thanks!I did find MobileMe and deleted it prior to reading the support message, noticing that I likely did not need it anymore while deleting iTunes and the related programs.
And as you were replying just now, I was able to download and install iTunes without having to return to 'commonfiles/apple' and attempt to delete it again.
I discovered that Adobe Bridge was open in the background, and it sent a similar 'runtime' error along with iTunes, and iTunesHelper.exe, and so I used Task Manager to end Adobe Bridge as part of the troubleshooting.
Seems like all is working again.
I appreciate your support! -
Having trouble with Web Services setup
I'm trying to get the claim code and the email address for my printer but everytime I go to Enable in the web services page it goes and says "Connecting" but stays looped. I have an Laserjet PRO m127fn.
Hello Falafelforlyfe,
Welcome to the HP Support Forums!
The LaserJet Pro M127fn may need a firmware update, do you have a USB cable and a Windows Operating System? If so, run this updater: HP LaserJet Pro MFP M125/M126 Series Firmware Update.
Hope this helps with the loop.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!
Maybe you are looking for
-
Dear All, How can we call web service from SAP? Thanks in Advance, Ramana
-
Install ELearning suite 2.5 on Windows 8.1
When I try to install El suite 2.5 on my desktop a message appears which says not enough space or permission on target folder. I have admin right and also run the exe als administrator. Disc space is nog problem al all. Does anybody know how to solve
-
Reasonable time for instance recovery in RAC
Hi, We're running with Oracle RAC configuration. The configuration is 2 instances one active one passive and we simulate failure of the active instance under load of ~1500 transactions per second. In our tests we're seeing that between failure time u
-
GRC 5.3 sp9, in CUP when creating a new request, if a company is selected on the main screen, when you search for roles, it comes back "no roles found". If you remove the company selection, then the roles show up. What could cause this?
-
Phone intermittently disconnects 4g without notice or warning. What's wrong?
Every so often (sometimes as much as once a day) my 4G connection randomly turns off. Usually after switching between WiFi on/off. I notice that it gets stuck in 3G and I will have to manually go into Settings > More Settings... > Mobile Networks >