Trusted RFC for two managed systems where SID is identical

Hi
I fall into strange situation, We have maintenance landscape & project landscape where SIDs are same for D & Q Systems.
Now I am trying to setup System Monitoring & EWA etc from Solution manager, I cant create Trust Relationship between the solution manager & managed system where SID is same.
This is not about defining system in SMSY.
Any help is appreciated.
Thanks
Rakesh

Hello,
If the SID's are under different installation numbers then this should be fine. If they are under the same installation number, how can Solution Manager tell the difference between the systems, and know which system to trust? They become identical entities if they share the same installation number and SID.
I hope this helps.
Regards,
Paul

Similar Messages

Creation of trusted RFCs between two systems

Hai,
Can anyone help me to create TRUSTED RFC between two systems ie Solution Manager and the Production. To carry out Service desk facility.

Dear Mohan,
You can create RFC's in the Solution manager system using T-Code SMSY. there you find all your installed systems select the system from the left hand side under Landscape Components click on Application Server ABAP on the right hand side you will find a tab client in this screen select the client for which you want to create TRFC. Go to change mode and click on the button Generate RFC with Assistance. Carry out the wizard for creating the RFC's...

The definition of the READ RFC to the managed system could not be found. Pl

Hi there,
i try to setup a managed system on our Solution manager for E2E Analysis... but the Setup gave me a sort of errors
The definition of the READ RFC to the managed system could not be found. Please make sure to run the RFC creation assistant in SMSY, as described in setup documentation
and
No RFC Read User (SOLMANSOX001 or SM_SID) was found at ABAP Host=HOST sys=00 client=001 for roles assignment. Please make sure you have run the RFC creation assistant for this system, in SMSY. If a user name different from the default 'SM_<SID>' or 'SOLMAN<SID><CLIENT>' was specified in the SMSY RFC creation assistant, you need to assign by hand the following roles & profiles to the Read RFC User : SAP_SATELLITE_E2E (role), S_AI_SMD_E2E (profile)
So which documentation means the setup where is described how to create the RFC Destinations with SMSY.. Thanks
Regards
Edited by: Bjoern Bayerschmidt on May 17, 2010 5:45 PM

Hello,
The documentation is located at [Help|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Then navigate Basic Settings > Solution Manager System Landscape > Create Systems > Generate RFC Connections
You can:
Assign an existing RFC destination to a client with Assign and Check RFC Destinations.
Generate RFC destinations for your managed systems
Change existing RFC connections.
Delete RFC destinations.
Resolve RFC Generation Errors
I hope you find this information helpful.
Regards,
Paul

Error in RFC & to Solution Manager System

Hi,
Error in RFC & to Solution Manager System
can anyone tells me why this error occurs???
With regards
kulwinder

FYI
We have just had same issue thaat in certain scenarios with RFC communication BACK to Solution Manager from Satellite system we got the error. We resolved this by looking at the RFC user used in the BACK connection (i.e. SOLMAN<SID>) on the Solution Manager and changing the user type from communications.
Hope this helps someone else, I spent ages digging around for an answer to such a simple fix
Paul

ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS

Dear all,
Hi,
I am configuring solution manager 7.0.
In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
program WEBADMIN not registerred.
can any one tell me how to register this program in sap gateway.
best regards
azeem

Hi Azeem,
Just before creating the rfc connection do this step.
Set-Up Solution Manager Connection to Solution Manager Diagn
Use
Check the connection to function Solution Manager Diagnostics.
Default Settings
The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
Activities
If the default values are correct, save the settings.
To run the Solution Manager Diagnostics in another system, enter the required data and save.
Also check that your java is active.
Regards
Ashok

Requirements for lead management system in sap sd

hii
can we maintain lead management system in sap sd module..what are the requirements for lead management system.

no

Port number while mentioned the RFC for reciever business system

hi
Could somebody tell me what is the port number to be mentioned while specifying the RFC for reciever busines system in the integration builder)configuration phase

Hello..
This might point to an unhanded exception. There should be a backend dump (ST22) available and that would help in more analysis. You might need a ABAPer to look into the dump. You may paste the dump here for more analysis.

Metalink Note for Warehouse Management System Testcase Repository

Hi Friends,
Please share the meatilink note id for Warehouse Management System Testcase/ Testscripts Repository.
Thanks and Regards,
A

if you have open transactions, such as deliveries, then you may not be able to process them further.
But do you really close all transactions in a test system?
It will not have any harm to new created documents

Database design (ERD )for Inventory Management System

Dear All,
I am going to develop a simple Inventory Management System software using C# .NET for my learning. After searching different forums, many people have suggested to first create a database design for the software. I want a database design, in short, an ERD
diagram for simple Inventory Management System which shows proper entities(tables), attributes and relationship between entities.
It would be highly helpful for me as I am newbie to C# and databases.
Thanks,
momersaleem

Dear Rebecca,
Thanks for you suggestions.
As I am going to develop IMS for learning purposes so I think I wouldn't need to go in detail regarding Customer name and addresses. However, I am still thinking of adding country attribute in customers' table which I think will be helpful to sort out customers.
What's the difference between a purchase and an order? They're usually the same thing, which doesn't mean you're
wrong, but what are you picturing here? Purchase entity will be used to keep record of purchases you made and an order entity will be used to keep record of orders that cutomers placed.
Pricing:
Any order system needs to manage two very distinct bits of data that are easy to confuse. The price in the Product entity is the current
price. The price in the Order entity is the selling
price. Not at all the same thing--current price is almost certainly going to change over time. Selling price won't.
Does it mean that I'll change the price attribute for product to current_price and add selling_price to order table which will help to keep record of price at the time of order?
Why did you include a quantity field in the Products table? Is it meant to represent stock on hand?
Yes you are right. It represents stock in hand.
Could you please recheck the entities relationships as I am not confirmed whether these are correct or not?
Thanks,
momersaleem

Same logical system name for two productive systems - BW, PI issues

Dear all,
we have a productive system which serves two companies (different company codes). This system is connected both to BW and PI for both companies.
There is a requirement that these two companies must use their own system, so the whole landscape (dev,qa,prd) will be copied to different systems (different server with different system id).
As a result of the above procedure we wll have two different productive systems, as required, but we wll have the same logical system name for the two productive systems, which must be both connect to bw and PI.
However as far as I know:
- we cannot connect systems with same logical system name to BW,PI
- we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
How can we overcome the problem?
Please advice.

> However as far as I know:
> - we cannot connect systems with same logical system name to BW,PI
> - we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
Right.
> How can we overcome the problem?
Since you split up systems (or plan to) I highly recommend booking an SLO service (http://service.sap.com/slo). Those people have to the tools and the knowlege to help you. I would not do this on my own.
Markus

Repository for Document Management System

Hi All,
I need to devleop a repository [ just like Document Management System ] for my existed application which is handling the documents.
If any user having access to the repository, opens the directory, he should not see any documents.
Please let me know, what are the technologies to be used etc., etc.,
Any suggestions or info will be appreciated.
Regards,
Raju

Raju31181 wrote:
If it is not possible with java, then could you let me know what are the other technologies which can help in resolving the problem.
The file system is controlled by the operating system. Thus if you want to manage permissions at that level then you must use the OS.
There are no "other" technologies for that. You can buy or find management applications which allow you to do the same thing that the OS does but via different user approach. Most will be specific to the OS because that allows the most features.

JInitiator - 2 versions for two different systems

I had a requirement of having two differnt versions of Jinitiator loaded on a single client system. This is requiremnt for two different applications say application 'a' and application 'b';
Will browser recognise which one to choose depending upon application ?

Yes, the confirguration information on the application server defines which version of the plug ins to us and so the correct one will be loaded.
Regards
Grant Ronald
Oracle Product Management

Business Package for Transport Management System & Travel Mangement System

Hi,
Is there any Business package available for "Transport Management System" and "Travel Mangement System"?
Please provide some link, if it is available.
Thanks in advance.
Manish

Hi Manish,
travel management is part of the ESS business package. As far as transport management, if you are talking about TMS capabilities for moving object in the landscape, go to https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio and search for "transport" You will find a thirdparty package for this.
Good luck.
John

Path for Content Management System (CMS)?

Hi All!
Has anyone configured Authoring environment for learning Solution. Can anyone please provide me the step-by-step details.
Also can anyone please explain the process of setting up the path for CMS (Content Management System) Address in KM for ECC6.
Ours is a EP7.0,ECC6.0 (NW2004s) new implementation.
Thanks
regards
Madhu

Hi,
"CMS" would in the first place only be a generic term that you can call any product that manages content.
At SAP I am aware of the following similar terms:
KM - Java-based CMS, integration framework for 3rd party CMS's and more of SAP NetWeaver, runs in the Portal
CM - The architectural part of KM that deals with basic content management services. With additional services and TREX this combines to KM.
DMS - "Document management system", R/3-based system for management of engineering documents, bases on "KPro" in Web AS ABAP, part of mySAP PLM, integrates into KM via repository manager
KW - KPro-based system for managing SAP-related documentation and training
Content Server - Object storage location for KPro-managed documents (see DMS)
KPro - "Knowledge Provider", deep level very generic set of ABAP methods to manage document attachment objects in an R/3 environment
Hope that clarifies...
Regards, Karsten

Transfer Rules for two Source System in Production

Hi All,
I have a question.
I have source system ECDCLNT230 (ECC Devlopment) which is connected to BIDCLNT200(BID Devlopment) I have two production source system ECPCLNT410 (ECP Pre Production Client) & ECPCLNT400 (ECP Production Client) which i want to connect with BIPCLNT400. when i transport my content from ECDCLNT230 to ECPCLNT410 and ECPCLNT400 , it works fine. i created 2 source system in BIPCLNT400 and replicated data source in to BIPCLNT400 so all data source has replicated.
Now when i transport the request from BIDCLNT200 to BIPCLNT400, i need two transfer rules, two transformation one for each source system. for that what kind of settings are required.
Thanks is advance.
Regards,
Komik Shah

Hi,
If I understand correctly, in your BW Production system, you want to connect / load data from your ECC Pre Production and Production system.
In this case, to automate the transport needed for changes of transfer rules for both source system, you will need to have two tranfer rules in your BW Dev. You can either create two source system in Dev pointing to the same ECC Dev system, or one to ECC Dev and the second to ECC QA. Use different name for this two source system.
In BW Production, you then then maintain the source system conversion of both source system.
Thanks.

Trusted RFC for two managed systems where SID is identical

Similar Messages

Maybe you are looking for