Trying To Authenticate Crystal Reports Server 2008 Onto Windows NT

Hi Everyone,
I've just installed CRS 2008 onto a Windows Server 2003 machine and it works using the Enterprise Authentication.
When I go into the CMC and choose Authentication then Windows NT, I fill in all the necessary information such as the Default NT Domain and the Mapped NT Member Group. When I save everything ( Update ) and logout, Windows NT Authentication doesn't appear even though I have enabled it.
Is there something that i'm not doing ??????
The Default NT Domain is BountyGroup
Mapped NT Member Group is: SecWindowsNT:
GB-Crystal\BusinessObjects NT Users - Test
Many Thanks In Advance

Hello Shannon,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Similar Messages

Crystal Reports Server 2008 on Windows 2003 Server

We have Crystal Reports Server 2008 installed on Windows 2003 Server. Pretty standard install.
On the same Windows 2003 Server, we have IIS setup to host some other sites (data.mycompany.com, intranet.mycompany.com). Now since Crystal Reports Server 2008 is running through Apache Tomcat 5.5.20 that is installed with Crystal Reports Server 2008. I need to setup something like reports.mycompany.com for reporting server. Since it is not in IIS and it does not seem that this install of Tomcat allows you to set this up to point to reports.mycompany.com. I need some feedback on how to set this up.

Hello Shannon,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Connecting Crystal reports server 2008 to BI 7.0

Hello,
I have a BI 7.0 server on Unix machine. I am trying to install crystal reports 2008 on windows 2003 server, and further integrate it to SAP BI by installing SAP integration kit. I have done the below.
1) Installed crystal reports server 2008 on windows 2003 server.
2) I can launch the CMS by start programs --> crystal reports server 2008 --> Central Management console.
3) I enter my user id an password and can see the business object portal with all the entries in it,
4) I have also installed SAP BOBJ integration kit (XI3.0) as well. It installs successfully. The only difference in the guide and what I did was, it dint prompt me for the CMS information, but it did when I was installing crystal reports server 2008.
5) Now I am able to connect to CMS, but I donot find the SAP authentication tab, and the server details tab, as per the guide.
I am a basis admin, and experimenting this for the 1st time. I need to set this up for one of the clients. They want to do some BI reporting through crystal reports. I have installed crystal reports server as of now. The client will now try to access it through CMS , by "InfoView". But CMS isnt giving me SAP auth tab, for me to go ahead and configure the SAP related settings.
Any inputs on the same will be highly appreciated.
Thanks,
AK

Hi Ingo,
Thanks for that reply..I am stuck now when I am trying to publish a report. I will summarize, what I have done so faar, just to make it easier to reply.
1) Installed the BO edge series xi 3.1
2) Installed Crystal report 2008
3) Installed the BOBJ/SAP integration kit.
4) Did the configuration steps as per the manual downloaded from SAP site named:"XI3-1_BIP_SAP_INSTALL_EN.pdf"
I created create a report, but I am not able to publish it. I am clicking the option to directly publish it to enterprise.But its failing complaining regarding some BI roles..not sure...My BW publisher service is starting fine.
Only thing is, I have created all the athorizations etc. i can also Log in to CMC with my BW credentials..So I am assuming BOE is atleast talking with SAP. But my my main aim is publishing reports on the server, which isnt happening when I save it with the above option.
Ok..one more thing, i have not performed the steps for the SAP/BOBJ server side trust..I think this might be the reason as well..Wanted your opinion on it.
Appreciate your input as always..
Thanks,
AK

Cannot install Crystal Reports Server 2008 and Client Tools on same machine

I am having trouble setting up Crystal Reports Server 2008 with Client Tools on a new Windows 2003 SP 2 machine. The Server 2008 package installs OK (built-in MySQL server, built-in Tomcat 5.5 server). Reports run okay. But my customer wants to run reports that use Salesforce as a data source, so I tried to install Crystal Reports Server 2008 Client Tools (needed for Salesforce support, apparently). I receive this error:
'Business Objects product detected: cannot continue with install'. Installation of Client Tools immediately terminates.
Oddly enough, when I uninstalled Server 2008, the Client Tools installed successfully. Then I tried installing Server 2008, and I got the same error message as with Server 2008. What the heck?
Any ideas on how I can get Server 2008 and Server 2008 Client Tools to live in harmony on the same machine? We were able to do this with a (otherwise overloaded) Win2K3 server before.
Thank you in advance for any help.

Typically the client tools are installed with enterprise by default. If not then you would want to use add/remove in control panel and select them. The installer thinks you are trying to install enterprise on top of itself and thus the error.
Regards,
Tim

CRYSTAL REPORT SERVER 2008 LINUX VERSION INSTALATION PROBLEM

GOOD AFTERNOON TO ALL ,
I am trying to install crystal reports server 2008 on RHEL4 .. after entering the product key...
it is trying to connect to existing database with follwing detalis given by me
..TNS NAME
userid and passwd or oracle user
error :
"failure to validate the database credential has a potentilal to crash the database at a later stage .enter correct information"
i set the all env for oracle oracle_home ,oracle SID ,LD path library..
i grant the source to oracle user also...
after that i tried same CRYSTAL REPORTS SERVER 2008 LINUX VERSION TRY TO INSTALL IN OTHER RHEL machine .it is not at all accepting the product key it self..
pls reply ..
Rehards
MAHENDRA

Post to the [Business Objects Enterprise Administration|BI Platform;
forum. This forum is for CR in .NET. (see the heading at the top of this forum).
Marking as assumed answered.
Ludek

Crystal reports server 2008 linux version instalation problem

GOOD AFTERNOON TO ALL ,
I am trying to install crystal reports server 2008 on RHEL4 .. after entering the product key...
it is trying to connect to existing database with follwing detalis given by me
..TNS NAME
userid and passwd or oracle user
error :
"failure to validate the database credential has a potentilal to crash the database at a later stage .enter correct information"
i set the all env for oracle oracle_home ,oracle SID ,LD path library..
i grant the source to oracle user also...
after that i tried same CRYSTAL REPORTS SERVER 2008 LINUX VERSION TRY TO INSTALL IN OTHER RHEL machine .it is not at all accepting the product key it self..
pls reply ..
Rehards
MAHENDRA

Post to the [Business Objects Enterprise Administration|BI Platform;
forum. This forum is for CR in .NET. (see the heading at the top of this forum).
Marking as assumed answered.
Ludek

Please help with my crystal reports server 2008 trial setup

Firstly, if this is in the wrong section feel free to move it. I find this forum is to big to find the information i need, in fact trying to find anything i need on this website is almost impossible. So far not impressed with SAP at all! we download a trial and when we have problems nobody can support us and we have to post in the forums for answers, which i find disgracefull to be honest. So this post is my last attempt of finding the answers to my problems or we are going to forget crystal reports server for good! I was also told that if i wanted help setting this up then i would have to pay, thats not how things usually go when we download a trial of any software!
Anyway, rant over!!
Right, we have windows server 2008 and have installed crystal reports server 2008. So far all i have managed to get working is the reports themselves which run and schedule fine. The dashboard and business views are so confusing i just dont get it at all, the manuals dont help either becuase they are rubbish basically. But my first problem is trying to get windows AD authentication working! easier said than done. I have spent 4 days trying to get it working but nothing is happening. this is what i have done so far
Set up all the options in the CMC to enable AD authentication, mapped a few groups one of which i am a member of.
Then i setup the krb5.ini file like below (removed my server name and domain name)
[libdefaults]
    default_realm = DOMAIN.CO.UK
    dns_lookup_kdc = true
    dns_lookup_realm = true
    udp_preference_limit = 1
[realms]
DOMAIN.CO.UK = {
    kdc = DC.CO.UK
    default_domain = DOMAIN.CO.UK
i also have that other file bscLogin which looks like this...
com.businessobjects.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required;
The server inteligence agent has been set to use the same username as i specified in the CMC which is also the service principal name and the administartion name
i have set the web config file to use SecWINAD as default, i have also set it to give the option of enterprise, win ad etc in a drop down list
i have gone round in circles for days following the instructions, and nothing is happening
Also i dont see any usernames within the groups i have mapped , am i supposed to see any? am i supposed to add them manually?? if so, whats the point in that?
So now everytime i try to log in i get this error message
Account Information Not Recognized: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserName@DNS_DomainName, and then try again. (FWM 00006)
There is also another error message i get, which isnt coming up right now but it says somthing along the lines of could not authenticate at this time (FWM 00005)
i fail to see what im doing wrong. I shoudl also point out that the username i am using for everything is our own network admin password!
any ideas on things to check before we give up with this all together?

Hi Roberto,
With the changes when SAP took over BusinessObjects the support packaging also changed. It's the way it is now but we are moving to and giving as much options as we can. SAP works on the Self Serve practice. the info is available but you have to find it, which is another thing we are working on to improve for BOE/CRS.
Best place to start is in the CMS link off the start menu, You'll find the Admin Guide and Setup/Configuration Guides. You can also find all of the latest info and updates to those guides from help.sap.com then click on the SAP BusinessObjects tab along the top and then on the left click on All Products and then filter on your version.
Once the Firewalls and Domains and your CRS Server is added to the Trusted Domains and ports opened to allow CRS to talk to the DNS Server CRS will begin to load all of the users into it's User Mappings. You still have to add each user or Group of Users but they will be available. Documents does describe how to....
Once you have the Admin Guide search on Security and it explains in details how to set up and which ports need to be opened etc.
Thank you
Don

Crystal Reports Server 2008 dispose not closing document

Hey everyone,
I;m running some reports through Crystal reports 2008 server (no service packs) using the RAS sdk and Java.
This was working swimmingly for a while until yesterday when the server hosting the RAS and app server fell over. I tracked it down to a problem with the RAS server. The error i got in my logs was General Exception, Report SDK Exception Not enough memory for operation. I reran the process and when i watched task manager the memory being allocated to crystalras.exe went through the roof! it went from 50k to 1.8g of ram in under 10 minutes.
I tried lots of the other suggestions in here for the errors about memory that are similar to mine (increasing the heap memory etc.) and none of them worked.
One thing i noticed though is that when I run the process and watch the metrics page of the RAS server on the management console the number of Open documents does not decrease even though i am 100% totally and utterly calling .close and .dsipose after every report i open. Definitely. Ive debugged it a million times and it is calling these methods. It is successfully releasing the connections fine but does not seem to releasing the open documents. After the Open documents metric went down to 0 (im presuming after a timeout) the memory that crystalras.exe was reduced. I then changed the timeout tag in CRConfig.xml to 1 minute to see would this help out any but the open documents did not timeout any faster.
Would i be right in thinking that these open documents would be causing my problem of the aggregated memory? Im at my wits end here so any piece of help is greatly appreciated!

Hi Ted,
Thank you for getting back to me, i was on vacation there for a while so that is why i didnt get back to you.
When I call reportClientDocument.isOpen() just before i dispose of the report it is true and after i dispose of it it correclty returns false.
I am really stressing out over this as we are reduced to running 500 reports through the server (one after another) and then stopping the process and restarting the RAS server and then running another 500 reports.
crystalras.exe gets up to about 2g of ram consumed for only 500 reports.
I even changed some of the timeout settings on the settings page of the management console to see would they timeout and release the memory but alas it didnt release as much as a byte. I left it for 3 days and it didnt deallocate one piece of memory.
Im currently investigating is there some way from my code that I can restart the RAS server, either through the SDK or through a windows process or scheduled task.
Ted, as far as i can see there are no service packs for Crystal Reports Server 2008, is that right? when i go to the downloads page there only ones listed for release X1.
Thank you for your help.
J.

Error when running a report in Crystal Reports Server 2008

Received the following error message:
Error in File Relatorio4: Failed to load database information.
Or
Error
Failed to open the connection. Relatorio4 Details: [Database Vendor Code:
12154 ]
I'm trying to run a report Crystal Reports 2008 in Crystal Reports Server 2008.
I use the native driver for Oracle (Oracle Server).
Any help would be appreciated!

Hi Vilari,
Do a small test to test your connection.
-Right Click on desktop ->
Create new text document->
Save as test.UDL->
double click and test connection by selecting driver name,datasource name,user id and password.
Click on Test Connection.
It should be succeed.
Database Vendor Code is the error returned by the database client/server.Its not a Crystal Report Error.Check Microsoft's web site for more info on what that error means.
Likely the client has not been in stalled or configured or both.
Also check that proper DSN is configured or not.
As you are using Oracle make sure that a TNSNAMES.ORA file exists and is in the proper place and accessible. See the operating system specific manual for details on the required name and location.
Check to see that the service name exists in one of the TNSNAMES.ORA files and add it if necessary.
Make sure there are no syntax errors anywhere in the file. Particularly look for unmatched parentheses or stray characters. Any error in a TNSNAMES.ORA file makes it unusable.
Hope this helps
Regards,
Shweta

Crystal Reports Server 2008 trial install - unable to log into CMC

Hi,
I have been looking for a way to host my existing Crystal XI reports on our in house web application rather than using a thick client application with cview. I was told that the options were Crystal Reports Server 2008 or Visual Studio 2008. I have downloaded trials of both and am currently testing.
After installing Crystal Reports Server 2008, including MySQL DB and Tomcat web server, i am unable to log into any of the applications with the error that:
Error: Server SCOTTPC:6400 not found or server may be down (FWM 01003) null
After seeing this i checked the services on my test machine and found that the Server Intelligence Agent was not started. So i tried starting it and recieved the generic windows message:
Service on local computer started and them stopped. Some services stop automatically if they have no work to do ... etc
After multiple reboots and reinstalls i am still unable to use any aspect of the application as i am unable to log into the CMC as the server is down. Now i am new to Crystal reports and web servers so have a very limited knowledge of whats going on here - i am primarily a DBA. From what i can tell MySQL does not even appear to be installed but i cannot be sure.
Any suggestions?

ok... after research it seems a DSN has not been created.
Also when trying to start the server intelligence service i see the following in the application event viewer:
[Node Name: SCOTTPC]
[User Name: SYSTEM]
Server Intelligence Agent has failed to initialize because the bootstrap file C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\_boe_SCOTTPC.bootstrap is missing information about the CMS cluster. Please restore your bootstrap file from your backup.
i have recreated the bootstrap file but still get the same error.
i have SQL Server 2005 installed on this rig as well - could this be causing the issue? Would it be better for me to integrate this to SQL Server rather than using the MySQL DB that comes with Crystal server 2008?

Failed to load database information. Crystal Reports Server 2008

Received the following error message:
Error in File Relatorio4: Failed to load database information.
I'm trying to run a report Crystal Reports 2008 in Crystal Reports Server 2008.
Configuration:
Driver connection: Oracle Server
Server: Windows Server 2003 R2
Any help would be appreciated!

Hi Vilari,
What is the drivers you are using to connect to your database.
Just check with the connection type you are using.
Is the SQL connection with user credentials are working fine.
Just try to connection with SQL 2000 drivers rather than 2005 native client drivers.
Thanks,
Naveen.

Transfer reports from Crystal Enterprise 9 to Crystal Reports server 2008

Hello,
a decision was made to stand up our new Crystal Reports Server 2008 box and only load new reports to it that were created in Crystal Reports 2008, or ones that were modified in CR 2008.
Now I have all of my users set up and some reports loaded on the new server. There has been a new decision to now move a couple hundred reports off the old server onto the new and also have the same folder structure and schedules as exists on the old CR 9 server.
Is there an export/import tool that will allow for this?

Hi,
i`m not quite sure if you can do this from CRE9 to CRS2008 with the Import Wizard. I think its only supported beginning with CE10.
Check the Import Wizard Guide from:
http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_bip_importwiz_en.pdf
Regards
-Seb.

Crystal Reports Server 2008 - RAS API ReportAppSession.initialize() fail

Hi,
We have a servlet (running on Websphere 6.1 container) trying to connect to Crystal Reports Server 2008 using RAS Java API to open unmanaged reports.
It fails at the very beginning of ReportAppSession.initialize() with error message:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: HQ-ROSIE03. - Connection refused: connect-- Error code:-2147217387 Error code name:connectServer
HQ-ROSIE03 is the server name hosting CRS 2008. I try to pass in either HQ-ROSIE03 or HQ-ROSIE03:1566 to setReportAppServer(), but no help.
On CRS2008, I checked from Central Management Console that all servers are up and running. I also add "-ipport 1566" to the commandline of ReportApplicationServer from CMC. It does not help either.
Would you please tell me what might cause the problem based on the error code and message? Thank you.
Here is the code.
        try
          ReportAppSession reportAppSession = new ReportAppSession();
          reportAppSession.createService(
          "com.crystaldecisions.sdk.occa.report.application.ReportClientDocument");
          //HQ-ROSIE03 is the server name that hosts Crystal Reports Server 2008.
          //I tried to pass in the port number, i.e "HQ-ROSIE03:1566". But it got the same exception.
          reportAppSession.setReportAppServer("HQ-ROSIE03");
          // This is where the exception is thrown.
          reportAppSession.initialize();
          ReportClientDocument lo_ReportClientDoc = new ReportClientDocument();
          lo_ReportClientDoc.setReportAppServer(reportAppSession.getReportAppServer());
          lo_ReportClientDoc.open(asReportName,OpenReportOptions._openAsReadOnly);
          ReportServerControl control = new ReportServerControl();
          control.setReportSource(lo_ReportClientDoc.getReportSource());
        catch(Exception exc)
            System.out.println( exc);
Edited by: Lijing Lin on Mar 27, 2009 12:39 AM

There is a typo when adding -ipport 1566 to the RAS server command from CMC.
It is now resolved.

Crystal Reports Server 2008 - Jobserver fails!

Hi,
I've just installed Crystal Reports Server 2008 V1. With the server specs listed below:
ESX VMWare Server
OS: Windows Server 2003
RAM: 4GB
DISK: 20GB FREE
I've since started scheduling reports and setting up of the user profiles/access levels.
The scheduling of reports worked fine for the first 2-3 days. After that, it seems as though the job server just dies/stops scheduling. Any other instances that are run manually will be stucked with the status "Pending".
Only after rebooting the Jobserver, will the 'stuck' jobs be processed. This is getting kind of irritating and unacceptable. Anyone has any solutions to this issue that i am facing ?.
Really appreciate any help!
Also, my event log shows a couple of errors and warnings which i will add below:
Event Type:     Error
Event Source:     BusinessObjects_JobServer
Event Category:     Scheduling
Event ID:     45388
Date:          16/12/2009
Time:          2:45:31 PM
User:          N/A
Computer:     XXXCRS01
Description:
Subprocess (Job Server Child) could not be started. Reason: Couldn't get IJob interface or writing IAudit: Pipe exception. Reason: jobserverchild (procreport, 0, Timeout waiting for Child [5724] to register ([120]seconds).
Event Type:     Warning
Event Source:     BusinessObjects_CMS
Event Category:     General
Event ID:     33017
Date:          16/12/2009
Time:          2:44:58 PM
User:          N/A
Computer:     XXXCRS01
Description:
Unable to contact server XXXCRS01.WebApplicationContainerServer on machine XXXCRS01 to perform status notification. Please check the server's system log for errors.
Edited by: Tan Ivan on Dec 16, 2009 8:28 AM
Edited by: Tan Ivan on Dec 16, 2009 8:30 AM

Hardware resources were NEVER an issue. We have quad core boxes with 2 processors, no other reporting requests just sitting idle and we see this. We now installed SP3 for XI 3.1 and still occasionally seeing it. RAM
We found that if the CMS or the Job server are restarted (we tested this with CR, Webi, Deski) all use the same code to process jobs so it makes sense.
SAP told me to add the -type outproc on ALL job servers. I tried this, I haven't had pending jobs yet on XI 3.1, but doesn't mean it doesn't happen anymore. We only randomly saw this due to our activity on the boxes.
It's one main pressing point for us to move to XI 3.1 Sp3.
By adding this switch we were told it won't re-use any jobserverchild.exe's. It will only create and close new ones used for the request.
We saw our pre-spawned go way down, so it looks like it doesn't pre-spawn any after putting this switch in the command line of the job server.
I still have a case open on this issue. I am waiting for it to appear it's head.
We noticed that it wasn't just Crystal, but all jobs pended. So I suspect what's happening is that something is losing connectivity, yet when I looked at the DB - it was saying active and running just like what we were seeing.
If we restart the CMS OR the job servers, either way they worked after that. I didn't have to do both so that seems like something is losing connectivity to the CMS.
One might say the one point of failure might be the CMS...since all other job servers are having issues. However, all on demand jobs were running fine, even against samples.
So it's a weird issue. I traced as well and no one at SAP could see anything. As soon as I restarted the problem went away so hard to trace unless I let it trace for days.
Edited by: Mike Kostuch on Oct 26, 2010 9:02 PM

Crystal Reports Server 2008 - Cant run Oracle Reports

Hey All
I have setup Crystal Reports Server 2008 on Microsoft Windows Server 2003 SP2. Oracle 9 is currenlty installed on the server and the TNSNAMES.ORA file has been configured so that it points to the correct server. The ODBC connection has been setup on the Server, I have tested the connection on the server and it works fine.
CMC is running fine, we currenlty can get SQL reports to work in it no problem. However I cannot get a Crystal Report created in Crystal Reports 2008, that is connecting to an ORACLE database to work.
When I add the report to the server, and try to view it on run it, I get the following error:
"Error in File ~tmp1d6c5ecca060440.rpt: Unable to connect: incorrect log on parameters"
I have tried playing around with the Database Configuration in CMC I get the same issue. I have also checked all the Servers in CMC and they are Enabled and running.
I dont know what else to do? Is there something that I am missing?
Your assistance is greatly appreciated.

Ok Guys, I figured out the issue.
I tried running the query sqlplus myuser/mypassword@mydb in CMD. Where myuser=USERNAME mypassword=PASSWORD and MYDB=Database Server.
It was giving me an error, SQLPLUS not recognised.
Oracle 9 was installed. I checked and Oracle 9 does not have SQL PLus. So I installed Oracle 10.
I then added the TNSNAMES.ora file in the right location where I installed it.
Re configured the ODBC connections with the new driver, tested and worked fine
I then tried running the sqlplus myuser/mypassword@mydb in CMD - it worked and connected fine.
I then rebooted the server - logged back in. I then logged back into the CMC, and ran a Crystal report connecting to an ORACLE database and it worked!
Hope this helps anyone else out having a similar issue.

Trying To Authenticate Crystal Reports Server 2008 Onto Windows NT

Similar Messages

Maybe you are looking for