Trying to connect a Belkin brand audio cable from my MacBook Pro to a Sony flatscreen TV. Cannot get any sound from the laptop out of the TV. What am I doing wrong?
I'm trying to connect a Belkin brand stereo audio cable from my MacBook Pro to a Sony flatscreen TV (Apple "genius" handed me the cable to purchase.) I have tried all the ports in the back of the Sony, and tried the volume on both the cable and TV remotes. I cannot get sound out of the Sony from my MacBook Pro laptop. What am I doing wrong???
Downloaded your operating manual. It appears that you need to connect the HDMI to HDMI 1 and the audio to the input socket just to the right of the VGA socket (i.e., between the VGA and the RF input connection). The picture on page13 seems to be the clearest I could find:
Although it's not exactly clear I think they are talking about a standard 3.5 mm (1/8") stereo jack for the audio inpu as opposed to the more common RCA jacks used in the row just above that VGA input socket.
I haven't checked the manual as yet whether you need to set anything special with the controls other than input select.
Note, if that truly is a 3.5 mm stereo jack cables are very common. In your case it would just be a cable with a 3.5 mm jack on each end.
Update:
You will have to experiment with this but I think you will need to try pusing the input button to select either HDMI1 or PC (or Component?). The manual is not clear on this (page 31). Sometimes it just comes down to pushing buttons.
Similar Messages
-
I have a Macbook Pro, 10.8.2 and can not get it to mirror websites on my Apple TV. What am i doing wrong?
Is your MacBook Pro early 2011 or newer. If not that is whay you cannot mirror and a third party app called airparrot would help.
Jules -
I Am not getting any sound at all from my ipad. I have checked the control panel and it says the sound is "on". Any other suggestions? It has worked just fine in the past.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
Cheers, Tom -
I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?
DVI interface does't allow audio. Is there optical IN from your Panasonic TV? By then you can connect your ATV to Panasonic using optical together. It will work.
-
I am trying to print off some work on my advent AW10 printer by connecting it with a usb cable to my macbook pro 13" 2011. On my laptop it keeps on saying printer failed. What do i do??
Hello molad,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides troubleshooting tips that can help you solve the issue printing from your MacBook Pro.
Troubleshooting printer issues in OS X - Apple Support
So long,
-Jason -
Hi, just bought my daughter an Iphone 4s and I can't get it to let her on youtube, Facebook etc., keeps saying no internet connection. My husband and I have 3G smartphones and we can get on them on ours, so I'm not sure what I'm doing wrong. Also, my other daughter has the same phone and has no trouble getting on these sites either. Any information to help is greatly appreciated. Thanks
Well, did you activate this new phone?
-
I am trying to connect my sandisk titanium flash drive to my macbook pro. the light is on but it is not recognizing it on the computer. any ideas
Do other USB devices work on your MBP?
Does this USB stick work on other MBPs?
There is a possibility that the stick requires more power than the MBP delivers. Try it on a powered hub.
Ciao. -
I'm trying to copy music from my PC to itunes. I open itunes, go to 'file', go to 'add folder to library', select the folder and nothing happens. What am I doing wrong?
Hello there, gleab.
The following Knowledge Base article reviews the ways to import content into iTunes:
Adding music and other content to iTunes
http://support.apple.com/kb/ht1473
Also keep in mind which formats can be added:
You can add audio files that are in AAC, MP3, WAV, AIFF, Apple Lossless, or Audible.com (.aa) format. If you have unprotected WMA content, iTunes for Windows can convert these files to one of these formats.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?
Are the songs playing whole in iTunes? if not download them again.
else read this Apple Support Article on your problem
Have a nice day! -
Unable to delete email from trash bin. How do I do this? If I select and chose delete, it doesn't. What am I doing wrong? My grand daughte is using my iPad and I don't want her to see some of the mail there.
There are two ways that should work. When you are in the trash folder, you can swipe on the email in the list - left to right - and a red Delete button should pop up. Or you can select - Edit - at the top of the list of messages and then select the message and tap delete.
Not sure exactly how this works - but if you have restrictions enabled - especially since you let your grandchild use the device - that may be restricting what you can do in the mail app. Go to Settings>General>Restrictions. If you have it set to on - turn it off or see if you have mail restricted. -
I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there. What am I doing wrong?
Motion basically looks at the the source footage and it's timing (in the timing section of the Inspector) when analyzing for tracking. Filters are basically ignored by the tracker. Retiming actions, like time re-mapping, or retiming behaviors that are applied before the tracker should be used by the tracker. Did you change the timing after doing the tracking? If so this would also require you to re-track the shot. Understanding that you found a workaround, describing the effects you applied would help to explain why you ran into problems.
Cheers! -
Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??
Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??
-
When I email an attachment (a .jpg file) with "Always Send Windows-Friendly Attachments" checked, the result is a picture embedded in the body of the email, not a attachment. What am I doing wrong.
1. "Always Send Windows-Friendly Attachments" has nothing to do with the display of attachments on either your machine or other ones. It's an esoteric setting that strips the resource fork from Mac files (that might have them) which could apper as a duplicate file on the Windows machine.
2. Send Plain Text emails. Then it will always be received as an attachment. -
Trying to update iTunes on iPhone 4s. Went to site, selected download, says thank you. Plug phone into computer and pops up cannot be used phone requires 10.5 blah blah blah. What m I doing wrong?
i used to have no trouble downloading music on my iphone 4s from i tunes, but now it just says cant download try later. is this caused by not having the current update or something else?
-
I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac. Any suggestions or ideas? Thanks!
I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac. Any suggestions or ideas? Thanks!
Maybe you are looking for
-
SOLMAN 4.0 Instalation help
Hi Dear All, I have recently given a task to install SOLMAN 4.0 and provided me a documet for help, in the documet it describes only about the CENTRAL INSTALATION. i fallowed the document and installed the CENTRAL INSTANCE, I am just wondering if I h
-
How is better to connect, use a class or ..
hi, i have a web application with ten classes. I hava a class DatabaseClass which provides only the connection to the database with a method call getMyConnection f.i. I thought to remove this class and put the databse conncetion String(server name,da
-
Problem with exporting still from 4k project
When exporting a still from a 4k project I get a white or transparent picture (depending on the chosen file type). Does anyone know if there's a solution to this problem?
-
Returned Forms Have Incorrect Data
Why is the "Preview Pane' showing this? (look at the blue "Classes Entered" column in the 1st photo) the second photo is what the same form looks like when it's opened. I've created a simple interactive form that uses Text boxes for user information,
-
CS5: Bug with Photoshop documents?
I frequently use layered Photoshop docs in Premiere, without much incident. I'll use them both flattened and as individual layers; if I need to make a change, I use Ctrl+E to open the image in PS, edit it, save, and it updates in the Premiere timelin