Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS write

Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS read files. Copies that would take seconds from a Windows based machine never complete. I have to close the transfer or shut off the machine half the time. Worst computer I have EVER owned, crashes non-stop, constantly freezes, and seems like EVERY operation is more complicated with this thing. Literally, my 1997 Compaq was FAR MORE reliable and user friendly.

This is one of the messages I keep getting; The Finder can’t complete the operation because some data in -- File Whatever -- can’t be read or written.(Error code -36)
I have copied things to the hard drive in the past, but it has always been incredibly slow, and now just seems to freeze and fail

Similar Messages

  • I am unable to copy files from my macbook pro to my external hard disk.

    I am unable to copy files from my macbook pro to my external hard disk. I tried to copy a movie 800mb in size to my EDD and  it shows the loading box and it says zero kb loaded out of 800mb and sometimes it loads a a few kb of the file, then after a while it ejects my hard disk and gives a message saying you should have ejected it properly. and it sometimes gives this message
    "The Finder can’t complete the operation because some data in “....” can’t be read or written.
    (Error code -36)".
    This happens with a range of files if they are more than a few mb in size, so I am pretty sure its not the file problem. It also occurs sometimes when i try to copy from my EDD to my mac.
    I have tried everything. I formatted my EDD to MS-DOS (FAT) format because i need to use it with mac and windows. I tried resetting The SMC and the PRAM and NVRAM. I tried verify and disk repair on disk utility. But the same thing happens over again and it is really frustrating. The problem doesnt happen with my PC.
    My EDD is an  Apollo 320GB hard drive from Imation.
    Also are there any particular EDD brands that may not have this issue with MACs and can be used on mac and PC?
    Thanks in advance!

    Hey guys,
    So this is follow up from my debarkle with the EDD. I found out my problem with copying files from Mac to EDD and vice versa was a result of a not so good EDD ( i had an apollo hard drive from imation) that was not very compatible with macs. So i did my research and found out that the best hard drives were Western Digital and Seagate. I bought the newest western digital EDD 1TB and formated it to FAT32 and guess what...no problems so far. The only problem is that FAT32 format doesn't copy files larger than about 4 gigs so i couldnt copy a movie from my brothers computer onto my EDD that was 1080p. You could probably resolve that by partitioning a small part of your hard drive in ExFAT? but yeah, hopefully that helped guys.
    Aaisha

  • How do i copy all files from my macbook pro to an external lacie hard drive?

    Hi,
    I need to sell my macbook pro 17" 2007 but want to save all files to an external lacie hard drive. What the best way to do this please?

    Consider these options...
    SuperDuper  http://www.shirt-pocket.com/
    or CCC  http://www.bombich.com/
    Which create a Bootable Clone of your existing Hard Drive...

  • Why can't I add files from my MacBook Pro to my external hard drive?

    I re-named my external hard drive on my PC, and now I cannot add files from my Mac to the hard drive. How can I add files again? Do I need to reformat my hard drive?

    Since you mention you used the external harddrive with your 'PC', I assume that it was NTFS formatted. By default Mac cannot write to NTFS only read it.
    To make sure: go to. Disk Utility (while the drive is mounted), select the drive and look at 'Format'. That should tell you the format type of the drive.
    If you are looking for third party solutions, try:
    http://www.macupdate.com/app/mac/24481/ntfs-3g
    http://www.paragon-software.com/home/ntfs-mac/
    However, know that they are not supported by apple and won't be the best solution. The best cross platform solution would be to reformat the drive with exFat (you can do this through disk utility), just make sure you backup your data before doing this. Both Windows and Mac can write to exFat and it does not have file size limitations as Fat32.

  • Why can't I transfer files from my MacBook Pro to my external HD?

    Hello,
    I was transferring files from my macbook to my Buffalo HD-PNTU3 when it was accidentally removed improperly; Once I plugged it back in I could no longer transfer any files the cursor would turn into the round banning icon and wouldn't take the command.
    After reading some posts in the community I tried repairing disk permissions in Disk Utility but it was in vain. Any propositions?
    Thank you in advance,
    Likolette

    Hello Likolette,
    Thanks for using Apple Support Communities.
    From your post I see that you're unable to move files to your external hard drive ever since it was unplugged before being ejected.  To start troubleshooting this issue, I'd like you to please repair the disk using Disk Utility.
    Disk Utility 12.x: Repair a disk
    Cheers,
    Alex H.

  • Cannot browse/copy iMac files from my MacBook Pro; REALLY FRUSTRATING...

    Hi folks,
    Wondering if anyone could help me out here??
    I can browse and copy MacBook Pro contents over to iMac (from Finder within iMac). Unfortunately i can't do the same, other way around. Can neither browse nor copy content from iMac to MacBookPro (from Finder within Mac Book Pro).
    File Sharing has been turned on both on MacBook and iMac. Users have full access including administrators. Full Read/Write permissions on all files within the folder that i want to share have been granted. Firewall is turned off on both computers.
    On MacBook Pro Finder, the iMac appears under SHARED on the left column. But when one clicks it or presses the button 'Connect As' - the following error always appears.
    "The Server "Michael Newham's iMac" is available on your computer. Access the volumes and files locally." (Obviously they're not available locally.
    I've used the Go - Connect to Server drop down option using afp and ftp access, but nothing there either. Both machines have Leopard 10.6.2
    So I'm a bit flummoxed
    Would appreciate some help.
    Mike Newham, Tipperary, Ireland.

    Turning ON and Off FileSharing on both machines seems to solve the issue.

  • How to transfer data from macbook pro to an external hard drive, im using (WD 1TB 3.0) ???. I cannot copy anything from my mac to it not a single file.

    how to transfer data from macbook pro to an external hard drive, im using (WD 1TB 3.0) ???. I cannot copy anything from my mac to it not a single file.

    ok - since you'll be sharing it with a PC - connect it to your windows pc - then format from there - instead of NTFS format - choose exFAT.
    or, you can read the link below on how to do it in dos mode.
    http://answers.microsoft.com/en-us/windows/forum/windows_7-files/how-can-i-forma t-external-drive-in-exfat-not-in/0f6bf19a-19d6-4470-ae05-53ddf26bb476?msgId=1860 eae3-3488-4eea-8326-f87b89d9851b
    once you've formatted it - you can now use it in both your macbook and windows computer.

  • How do i copy files from my macbook pro to my hard drive? These files were previously started on my old dell.

    how do i copy files from my macbook pro to my hard drive? These files were previously started on my old dell.

    More then likely that external drive is formatted the Windows NTFS format which Mac OS X can Read but it can not Write to that format. So you would need to copy all the data off that drive, to either a Windows PC or to your Mac, thenn use the Mac to format it for the Mac OS. Which would be Mac Extended (Journaled) with a Partition Table of GUID.
    If you want to use that drive on both Mac and PC then you would need to format it either FAT32 or exFAT.

  • How do i copy files from my macbook pro to a usb drive

    how do i copy files from my macbook pro to a usb drive

    Connect USB drive to your MBP, format as "Mac OS Extended (Journaled)" with a single GUID partition using Disk Utility and copy away.
    Clinton

  • HT3263 I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection.  The two macs cannot find each other.  any suggestions

    I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection.  The two macs cannot find each other.  any suggestions

    Try this article - http://support.apple.com/kb/HT4889.
    If it doesn't help, post back in this thread.
    Best of luck,
    Clinton

  • I am new with iMac and I am trying to copy some file from my external HDD but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

    I am new with iMac and I am trying to copy some file from my external HDD that a used with my PC but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

    No, unfortunately, when you format a drive, it will erase all the contents. So you will need to find a temporary "storage" place to put the stuff using a PC so you have access to it. Then reformat using Disk Utility (Applications > Utilities). If only using with mac, format Mac OS Extended (Journaled) and use GUID Partition scheme under Partitions/Options. After formatting, you can drag the files back.

  • I cant able to copy my files from my macbook to external hard disk,its showing "read-only",but i can able to transfer files in windows os,why cant i able to do tht in here?

    i cant able to copy my files from my macbook to external hard disk,its showing "read-only",but i can able to transfer files in windows os,why cant i able to do tht in here?

    to frederic1943
             Its in NTFS Format...and i hav downloaded the file NTFS-3G,but still i dont know wht to do with that.will u pls help me here.

  • I tried to sync a playlist from my Macbook pro to my Ipad.  The title of the playlist transferred, but not any of the songse

    I TRIED TO SYNC A PLAYLIST FROM MY MACBOOK PRO TO MY IPAD.  THE NAME OF THE PLAYLIST TRANSFERRED, BUT NONE OF THE SONGS.
    WHAT MIGHT HAVE HAPPENED?

    Yes to all your questions.  When syncing my playlists from my computer to my Ipad sometimes they sync and sometimes only the NAME of the playlist comes over.  The one that currently is not syncing was originally created from my ipod as a series of voice memos.  When put into a play list on the computer, then put back on the ipod as a playlist everything was fine, but the playlist will not go to the iPAD

  • I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac

    I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?

    Mixing files with data is not always great idea.
    See info here.
    Q3 http://pondini.org/TM/Time_Capsule.html
    Why not just connect the PC directly to the TC by ethernet and copy the files over?
    It is hugely faster and much less mucking around.
    In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
    There is more info here.
    http://support.apple.com/kb/HT1331

  • I'm trying to transfer my pictures from my iPhoto library to my external hard drive. I dragged the iPhoto Library folder into the drive and after waiting a while it says Error Code -36. I need to free up space asap, what should i do?

    I'm trying to transfer my pictures from my iPhoto library to my external hard drive. I dragged the iPhoto Library folder into the drive and after waiting a while it says "Error Code -36 The finder cannot complete the operation because some data in 'iPhoto Library' could not be read or written". I need to free up space asap, what should i do??

    Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
    In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

Maybe you are looking for