Trying to download Aperature but a window pops up saying that the purchase could not be complete because OSx version 10.9 or later is required..? HELP!
Im trying to downlaod Aperature but a window pops up saying that the purchase cannot be completed because OS X 10.9 version or later is required? HELP!
What version of OSX are you using, and is this a download from the App store? Have you just bought Aperture or did you previously purchase and if so, from the App Store or from a retail / trial upgrade?
Andy
Similar Messages
-
Okay, so I have been having trouble with my mail application all week. The window refused to open and would not quit. Today, I tried to shut down my mac and a pop up window told me that I was unable to shutdown because mail was open. After using a key combination, I successfully was able to quit mail with force quit. Then I was able to shut down with out a problem. However, upon rebooting, my computer refused to let me loggin. I put in my password correctly but then the rainbow pinwheel showed up and stalled for a minute and then my screen flashed and the gray screen reappeared, expecting a password. I tried turning it off and back on again with no luck. I also reset my password after reading a similar discussion, but I still can't log in. How can I fix this?
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup Issues - Resolve
Startup Issues - Resolve (2)
Avast! Uninstall -
I am using a portable USB storage drive connected to my laptop. I am trying to delete a file from the USB drive but it is not working. A pop up window appears that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61)". What does that mean and how do I fix it? Thank you.
All I can tell you is that is a write permissions error. How is this drive formatted? Check the file's permissions. You can try:
Open the Terminal application in the Utilities folder. At the prompt enter:
sudo rm -rf
Leave a space after "-rf" and drag the file into the Terminal window. Press RETURN. You will be prompted to enter your admin password which will not be echoed. -
I am trying to restore my phone, however it says that the iphone could not be activated because the activation server is temporarily unavailable. I have tried again a few times but still the same. Any suggestions?
Was your phone ever locked to a different phone carrier than the one your on now?
If so how was your phone unlocked?
Very rarely is the server unavailable.
Is your phone jailbroken or was your computer used to jailbreak a device? -
I am unable to synch my iPhone to my laptopI have tried to carry out software updates - I get a message saying that the updates could not be completed as I am not connected to the internet - despite being connected to the internet!
What OS on your Mac?
What iOS on your phone?? -
Hello, Im trying to update my ipod 3g 4.2.1 to ios 5.0.1.When I try to update,itunes says that 4.2.1is the lastest sofware for my ipod.I also tried to do it manually(shift+restor)itunes says that the"ipod could not be restore because the fimwire isnot compatible" I need some help on this.
The messages are saying you have a 2G iPOd. Those canonly go to 4.2.1. Apple only made 32 and 64 GB 3G iPOd. A 32 can be either. To further identify yours:
Identifying iPod models
Enter SN hee:
Apple - Support - Check Your Service and Support Coverage -
I am trying to buy some coins on Haypi game. it tells me that the purchase could not be completed contact itunes store support to complete this transaction. how can I do this?
You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then try selecting Purchases, Billing & Redemption
-
when attempting a restore, as suggested, to try and fix a week wifi signal on my iphone 5 I got past the point where the sopftware was extracted from my phone but then an error message appeared saying that the phone could not be restored becase of an unknown error (3014). I have tried about 20 times to make it work after trying a number of suggestions I have seen online. My phone gives me know response accept showing a picture of the cable and the itunes symble an the screen permanently - please help
Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
since i download the new version of i tunes i canot play the songs of my library....it say "the song could not be used because the original file could not be found".
would you like to locate it.i just want to play directly..what i do? please help thanksThis happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
When trying to purchase Extra Lives I get a message stating that my purchase can not be done
You need to contact Support
http://www.apple.com/support/itunes/contact/ -
I want my songs back, i have paid for these songs I would like to listen to them on my iPod. It's that simple. I don't want to have to pay someone to fix my iPod over the phone. This has happened to me before and i really get frustrated when i can't. My little sister bought the songs using a itunes gift card. i plugged in my ipod nano gen. 4 into the CPU which is a Windows BTW, and after it had synced it would not allow me to play my music (on my ipod) Saying they could not be copied. there's 19 songs. The last time this happened it started with 2 songs unable to copy, then 19 songs unable to copy, THEN........78 songs! i don;t not want this to happen AGAIN! sooooooooooo.................HELP ME!!!!!!!!!!!!
Downloading past purchases from the App Store, iBookstore, and iTunes Store
-
I have deleted files/folders like it tells you too here, but nothing seems to work.
Can anyone help?
Thank youright click on the setup file
run as administrator
also try compatibility mode as winxp sp3
also try rebooting windows.
if all fails still, run ccleaner, clean your pc of junk files, scan registry for errors and spyware while your at it.
can you install another app? meaning will it install anything else or is it just itunes that wont install?
are you logged in as an admin? -
I have tried to download apps and a window pops up saying apple id has been disabled. I have reset my password and it is still happening! Help
EdwardGlenn wrote:
Lol the U.S.A.
And I would have no way of knowing that since you are not showing a location in your profile. This forum has users from all over the world looking for support.
Anyway, good luck. I hope that you are able to get this resolved quickly. -
Whenever I click on the Itunes icon, a window pops up saying that `The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes`. I then click ok and the pop up vanishes. Any ideas as to what I should do?
What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future. -
Hi Friends...
I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?Sorry, I am very confused. I asked the following question....
Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
The answer that you gave was....
This is the only one
Now you are saying that....
But I have lots of other files on Time Capsule! The back up file is only one of them.
Can you clarify, please?
Maybe you are looking for
-
Export a single body from a Catia v5 multibody part
Hi. We just purchased Adobe Acrobat 9 Pro Extended for the purpose of converting cad-files. It works great! One problem though is when I'm converting a file, in this case Catia V5, which contains several bodies, to a parasolid. When I open the part o
-
Viewing CFM files in Dreamweaver
Hi all....." have CF setup so I just run .. my CFM files from DW8 by hitting F12" Saw that in another post and would really love to set my dreamweaver up so it can do this too. Can anyone advise? Being new to the 'scene' I'm constantly learning. My s
-
Enrollment pending - for 4 days
After confirmation of purchase - Your order is being processed W456944342 and no activation - already looked in Spam ! Mauricio
-
Scheduling Export in database control
Hi , I just want to know what is the best way to schedule daily export(datapump) in Oracle for Windows. Should I schedule one export and use the SQl script to schedule a SQL script job or use the host command job to do the Export? Is there another wa
-
BD20 and IDOC_INPUT_ORDCHG
Hi, Just a simple question. For order-change idocs, if i processed it using BD20, does it call the function module IDOC_INPUT_ORDCHG? In the debugging mode, i placed a break-point at the beginning of FM IDOC_INPUT_ORDCHG, it seems like not calling th