Trying to get 3d to work with xbr70x850b and bdp-s7200

have new xbr70x850b and new bdp-s7200. Using Exodus to experiement. BD says disk is 3d. tv lets me into 3d menu so it seems to think the feed is 3d. but none of the menu items (side by side, over/under) are present. Glasses are registered and turned on. BD connected directly into tv with new hdmi cable. Have tried lots of setting changes on tv and bd, but can't get any of the 3d menu options to appear on tv. 3d works with streaming samples from youtube. Just not with BD. Any hints? very frustrating.

Ok I have been following the instructions supplied on this website http://www.zentus.com/sqlitejdbc/usage.html.
I have downloaded the jar and the dll file and have placed them into the same folder as my jar file. Then as it says I enter into the command line:
"java -cp sqlitejdbc.jar - Djava.library.path=. - jar CBL_Program.jar" and I get this:
Exception in thread "main" java.lang.ClassNotFoundException: org.sqlite.JDBC
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at cblprogram.Main.main(Main.java:28)
Which seems to be the same exception as when I run the program from netbeans.
I am really stumped on this one, please can someone help.

Similar Messages

I have a Power Mac G4 and i am trying to get it to work with my LCD

I have a Power Mac G4 and i am trying to get it to work with my LCD Monitor/TV. The connection on the computer is DVI and the connection on the Monitor is DVI. The Monitor says in the manual to hook up computers using the DVI connection. When I connect the too the monitor says there is no video input. I tried changing the settings on the monitor from PC mode to DVI mode and nothing. I have also tried changing the display on the computer to a couple of different settings and nothing. Please Help?

Hi-
A little more info please.
What model G4?
What Graphics card?
What OS?
What model/make of monitor?
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, RaptorSATAATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, 23" ACD, Ratoc USB 2.0, QCam Ultra, Nikon Coolscan

HT4437 The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring. Does anyone know what I could be doing wrong? Thanks!!

The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring. Can someone help me to get things working? Thanks!

As an IT person, I can put my hands up to the same difficulty. Then on double clicking on Home button, find AirTV symbol amongst Music control
Solved my problem having spent hours looking for a complicated answer. Well done Apple for hiding it so well.
Brian

Anyone tried to get Jabber to work with Domino for contact search

I have a customer who has recently upgraded to CUCM 8.6.2.22900-9 and Presence 8.6.4.11900-1 fom CUCM 6.x and Presence 6.x. When they were at 6.x they were able to integrate CUPC contact search with Domino server. I realize this was not supported, but they got it to work. Now they want to attempt to get Jabber to work with Domino. Again I realize that is not a supported LDAP for Jabber, but I was wondering if anyone has perhaps tried this and what their experience was.

I have a customer who has recently upgraded to CUCM 8.6.2.22900-9 and Presence 8.6.4.11900-1 fom CUCM 6.x and Presence 6.x. When they were at 6.x they were able to integrate CUPC contact search with Domino server. I realize this was not supported, but they got it to work. Now they want to attempt to get Jabber to work with Domino. Again I realize that is not a supported LDAP for Jabber, but I was wondering if anyone has perhaps tried this and what their experience was.

Trying to get PM to work with our upgrade process

We are trying to get Personality migration working properly in our
environment to migrate our users from 2000 to XP. We have been able to
get the files to migrate properly, but are having issues with the
application settings. We have installed PM from Zenworks 7 which is the
Computer Associates version. When we are setting up the template in the
application area, there does not seem to be anything there. For example,
how do we set PM to gather the IE settings but not gather the proxy
settings? Also, where would I find better documentation on this product?
THanks in advance for any help.
Brian

Brian,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Trying to get video chat working between mac and pc

im trying to get video chat working between a mac and pc
pc-running xp with aim 6.0
will updating to aim 6.1 fix this ?
we can text chat with no problem
we can not audio or video chat
any help would be great
thanks santini

Hi Z,
Lets check the Port Forwarding at your end.
Does this Zyxel have UPnP at all ?
If so use that and disable the Port Forwarding.
If not then these ports need to be forwarded.
I will list with Protocols as some device need these.
TCP 5190 for AIM Login and text chats (can be substituted for 443)
TCP 5220, 5222 and 5223 for Jabber (the last is for OS X servers and GoogleTalk)
TCP 5298 this is part of the Bonjour set up for iChat if you have other Macs
UDP 5060 this is for the SIP negotiation that iChat needs
UDP 5678 this is where the visible invites come and go out on.
UDP 5190 for AIM file sending and Group chats
UDP 16384-16403 This group of 20 ports is where any Audio or Video chat takes place.
As the 443 port is below 1024 (the NAT threshold) you should not have to Forward this.
10:23 PM Monday; August 13, 2007

Trying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.

rying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.
Does anyone know how to fix this?

What EXACT version of Photoshop CS4 are you running? You should be on Photoshop CS4 v 11.0.2.
Also run Apple's software update to see whether it offers you the latest Epson update:
Printer Driver v9.33
Epson Stylus Pro 3880, Drivers & Downloads - Technical Support - Epson America, Inc.
MOST IMPORTANTLY: have Photoshop re-create its own Preferences:
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
Important: If you re-create the preferences by manually deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here:
How to Reset Photoshop CS6’s Preferences File | The Complete Picture with Julieanne Kost | Adobe TV
Mac OS
Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

Ive bought an Airport Time Capsule. trying to get it to work with BT home hub 3

Ive followed the advice on this forum but I still cant get the Capsule to connect to the internet.
Ive set the Capsule as a bridge.
Connected the ethernet cable from the Capsule to the Ethernet port on the back of the BT homehub 3.
the light on the front of the capsule still flashes yellow.
so I have a back up made, but in order to get it to work, i need to switch between the wireless network on the homehub (where I have internet connectivity) and the Capsule wireless network (where there is no internet connectivity)
what am I doing wrong?
thank you.

That is odd. Normally with bridge you will have no issues with internet.
Is the ethernet light on, both on the TC and HH3.. the little light next to the port.. or it might be on the main panel of the HH3.
Find out what the error messages are by opening the airport utility and click on the TC.

Can't get 4.1 working with ALSA and Intel card

Hello everybody,
My problem is simple, but I cannot find any solution for it.
I have Arch Linux 64 bits installed with ALSA and a Intel onboard sound card
I can get the audio working simply installing ALSA and unmutting the channels, but I get no sound at the rear speakers and the center speaker (subwoofer).
I run:
$ spearker-test -c 5
And all I have is sound at the 2 front speakers.
Looking at alsamixer I only saw configuration for 2,4 and 6 channels. I am currently using the configuration for 4 channels.
I unmuted everything in alsamixer (playback) and nothing changed.
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi 23704 1
snd_hda_codec_realtek 59331 1
snd_hda_intel 25700 7
snd_hda_codec 97464 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74926 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18966 1 snd_pcm
snd 60021 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
Anyone knows how to make it work? Thanks!

Thanks for the answer, tried this command, here is the output:
$ speaker-test -t wav -c 5 -D surround41
speaker-test 1.0.26
Playback device is surround41
Stream parameters are 48000Hz, S16_LE, 5 channels
WAV file(s)
Broken configuration for playback: no configurations available: Invalid argument
Setting of hwparams failed: Invalid argument
Is there something needed to make this command run correctly?

Trying to get rows to ResultSet with CallableStatement and stored functio

Hello!
I'm using JDBC with Oracle XE 11g2, driver ojdbc6.jar (Oracle Database 11g Release 2 (11.2.0.3) JDBC Drivers, JDBC Thin for All Platforms) from oracle.com
I've got a table
CREATE TABLE ORGANIZATIONS
CODE VARCHAR2(4),
DESCRIPTION VARCHAR2(255)
And I'm trying to get all organizations into ResultSet using CallableStatement with stored function:
CallableStatement cs = connection.prepareCall("{? = call FN_GET_ROWS}");
cs.registerOutParameter(1, oracle.jdbc.OracleTypes.CURSOR);
cs.execute();
I've created two types:
CREATE OR REPLACE
TYPE TEST_OBJ_TYPE AS OBJECT (
CODE VARCHAR2(4),
DESCRIPTION VARCHAR2(255)
and
CREATE OR REPLACE
TYPE TEST_TABTYPE AS TABLE OF TEST_OBJ_TYPE
and my function is
CREATE OR REPLACE
FUNCTION FN_GET_ROWS RETURN TEST_TABTYPE AS V_Test_Tabtype Test_TabType;
BEGIN
SELECT TEST_OBJ_TYPE(A.CODE, A.DESCRIPTION)
BULK COLLECT INTO V_Test_TabType
FROM
(SELECT CODE, DESCRIPTION
FROM ASM.ORGANIZATIONS
) A;
RETURN V_Test_TabType;
END;
but when I run my program I've got error:
P LS-00382: expression is of wrong type
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored

It doesn't look like your PL/SQL Function is returning a REF CURSOR to me. It looks like you are returning a PL/SQL Index-By table of Objects.
Regards,
Mark

Please can someone help me have tried to get icloud to work on ipad and iphone 4

Hi everyone
have set up icloud on both ipad2 and iphone but it is not pushing the data to each device? It says it has backed up am I doing something wrong please can someone tell me how to get it to work, many thanks

You only need to enter your information once. Ideally, turn on iCloud first. If you have already entered data in multiple devices and then turn on iCloud, you may have some duplicates to clean up.
You don't need to have anything plugged in. Just turn on iCloud. Your pictures will show up on all devices.

Trying to get MySQL to work with Oracle Tutorial

Hi,
I was attempting to work through the following tutorial Build a Web Application with JDeveloper 11g Using EJB, JPA, and JavaServer Faces
http://www.oracle.com/technology/obe/obe11jdev/11/ejb/ejb.html
But with a twist that I want to attempt with MySQL. Whilst MySQL is working fine in the IDE when I test the javaServiceFacade it fails as the construct/syntax of the sql command is incorrect :-
SELECT rowid, contractno, fax, advert, status, remark, tel, kva, lastuser, createddate, type, postcode, contact, country, modified, refno, address, email, custname FROM "enquiries" WHERE (refno LIKE ?)")
You note the "enquires" which for mysql should not have the quotes and is causing error.
I have looked at persistance.xml and it looks ok. Even tried setting database to MySQL4
Any suggestions to what controls the SQL syntax?
James
excerpt from persistance.xml
+<properties>+
+<property name="eclipselink.target-server" value="WebLogic_10"/>+
+<property name="javax.persistence.jtaDataSource"+
+value="java:/app/jdbc/jdbc/main_MySQLDS"/>+
+<property name="eclipselink.target-database" value="MySQL5"/>+
+<property name="eclipselink.jdbc.native-sql" value="true"/>+
+</properties>+
+</persistence-unit>+
+<persistence-unit name="genesys" transaction-type="RESOURCE_LOCAL">+
+<provider>org.eclipse.persistence.jpa.PersistenceProvider</provider>+
+<class>genesys.Enquiries</class>+
+<properties>+
+<property name="eclipselink.jdbc.driver" value="com.mysql.jdbc.Driver"/>+
+<property name="eclipselink.jdbc.url"+
+value="jdbc:mysql://127.0.0.1:3306/main"/>+
+<property name="eclipselink.jdbc.user" value="root"/>+
+<property name="eclipselink.jdbc.password"+
+value="B0855467D54C688144F5AA7621CE386D"/>+
+<property name="eclipselink.logging.level" value="FINER"/>+
+<property name="eclipselink.target-server" value="WebLogic_10"/>+
+<property name="eclipselink.target-database" value="MySQL5"/>+
+<property name="eclipselink.jdbc.native-sql" value="true"/>+
+</properties>+

I am trying to do the same thing, but in my case I am using my onkyo receiver to do the decoding. I have a minijack converter to coax in the mic jack of the card. I switched the options to digital i/o out. This does work, but I can only get stereo sound. When I play my 5. dvd, it still plays it in stereo sound. I have all the settings correct, as I can get 5. sound out of my onboard coax but not the creative extreme music. It also greys out the option for passthru(external source decoder).
My roommate has the platinum creative sound card with the front panel with coax/optical out right on it, he has WAY more dobly/dts options in his menu settings and is able to send 5. out easily. auto detects it and with minor tweaks, gets 5. out thru either optical or coax.
I thought this card supported 5. coax out thru the digital port. I just dont think it does, the options are missing from the menu all together, and yes I have the most recently updated webupdate. I can get stereo sound thats it. Funny how my realtek onboard does a way better job then this "higher end" sound card.
Am I missing something maybe? Please help, I would like to get this going, or at least get a solid answer if this is even possible so I can stop wasting my time with it.
Thanks,
Joe

Trying to get collision detection working with havok

Hi - I'm having some trouble using collision detection within
director using a w3d file with havok applied to it. I've been using
the registerinterest function but I get a "value out of range"
error.
This is my code (there is a cone and box on a plane imported
from 3d max - named Cone01 and Box01 these are both movable rigid
bodies).
on beginSprite me
box1=member("3d").model("Box01")
cone1=member("3d").model("Cone01")
w = member ( 1 )
hk = member( 2 )
hk.initialize( w, 0.1, 1 )
hk.registerInterest (box1, cone1, 10, 0, #collision, me)
end
on collision me, details
sound(2).play(member("hihats"))
end
on enterFrame me
end
I've also tried this and had no luck:
on beginSprite me
rb1 = sprite(1).pHavok.rigidBody("Box01")
rb2 = sprite(1).pHavok.rigidBody("Cone01")
w = member ( 1 )
hk = member( 2 )
hk.initialize( w, 0.1, 1 )
hk.registerInterest (rb1, rb2, 10, 0, #collision, me)
end
Any help would be great.
Thanks

quote:
Originally posted by:
josiewales
Hi - I'm having some trouble using collision detection within
director using a w3d file with havok applied to it.
Just study this example:
http://necromanthus.com/Games/ShockWave/tutorials/FPS_Havok.html
cheers

I have a ipod touch gen 2 and I am trying to get airplay to work with my pioneer Elite VSX receiver.

I have a gen 2 IPOD touch with the current operating system (4.2.1). As well I have a Pioneer A/V Elite series VSX 52 that is airplay ready. On my ipod touch there is no airplay icon(s) with the music feature. I am trying to make this work but have no results. If there is a download that I need to enable to have this function work.
Let me know
KUNTRI

There are no setting on the iPod. Unlike the iPad wich morrors the iPad display, TV out on an iPod only displays TV out on apps that support TV out. The Video app is one such app.
Is that you problem?
Otherwise:
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.

Trying to get SPDIF to work with Audigy 2... help! (I read the guide)

?I have the following miniplug/TOSlink cable purchased from Amazon:
Amazon.com: Cables To Go 2707 Velocity Toslink-to-Optical Mini Plug Digital Cable (3 Meters): Electronics: Reviews, Prices & more
I enabled SPDIF output from the Audigy 2 card as the default sound device in Windows 7. I have the miniplug end plugged into the white output of my Audigy 2. There is a sound bar next to the SPDIF output showing that there is output if I play a DVD or music. But, when I look at the TOSlink end of my cable, I see no red light AKA no signal is being output.
In the audio console, I have tried both the SPDIF passthrough and the onboard encoder options without success from either. What am I still doing wrong? Thanks guys

so what i understand is i cant connect my home theatre (optical out only) with my audigy 2 zs even i use optical to mini plug adapter?

Trying to get 3d to work with xbr70x850b and bdp-s7200

Similar Messages

Maybe you are looking for