Trying to get my Viera TX-P42S30B hooked up to me home network via Airport express with no luck.

Trying to get my Viera TX-P42S30B hooked up to my home network via Airport express with no luck.
Have tried both wired (network cable) and wireless to no avail, can't find much info online, any help appreciated !
Airport utility 5.5.3
Airport Extreme 802.11n
Airport Express 802.11g

The problem is that the AirPort Express (AX) is creating a subnet.
To prevent that, configure the AX to act as a bridge (so that it is NOT sharing a single IP address).

Similar Messages

  • Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Plz advise.

    Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Please advise.

    If you have not already done so, I suggest that you temporarily disconnect the Ethernet cable from the AirPort Express that goes to the Tivo box.
    Instead, turn off the wireless on a laptop and connect the laptop to the Ethernet port on the Express. See if you can get an Internet connection on the laptop.
    If you still cannot get an Internet connection on the laptop, try another Ethernet cable that you know is working correctly.
    Post back on your results.

  • When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-tunes to play a single album and then stop, without continuing on through my entire library. It's a problem that doesn't occur when I'm listening through my i-pod.

    When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-Tunes to play a single album and then stop, without continuing on through my entire library? It's a problem that doesn't occur when listening on my i-pod.

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • Trying to set up Airport Express with Ethernet Powerline adapters

    Hello,
    Having some problems trying to set up my Airport Express with Netgear ethernet powerline adapters.
    I want to set up as follows:
    Wireless Belkin router --- powerline <---> powerline --- airport express --- home stereo system
    The problem I have is that I can connect the airport x in client mode & wirelessly play music using airtunes (until the sound breaks up) but itunes does not find the airport x when connected via the powerlines.
    I have airport admin utility configured as follows:
    Airport tab:
    Wireless mode: create a wireless network
    Wireless network name: same as my wireless router SSID
    Allow this network to be extended: unticked
    radio mode: 802.11n (802.11b/g compatible)
    Channel: automatic
    Wireless Security: WPA/WPA2 personal (as per my router)
    Wireless Password: as per my router
    Verify Password: as per my router
    Internet tab:
    Connect using: ethernet
    Connection sharing: off (bridge mode)
    Music tab:
    Enable Air Tunes ticket
    no password set
    In iTunes, I have home sharing on & share entire library selected with no password set.
    Using OS 10.6.5 & Airport Express 7.5.2
    I can ping the IP address of the airport express when connected via the powerlines but cannot select the speakers in iTunes (they are greyed out).
    Any assistance would be appreciated....
    Thanks

    Hi,
    Thanks for the quick response...
    As suggested, I connected up the Airport X to the Belkin and plugged in a pair of headphones. It didn't work, still could not select the Airport X as speakers.
    Dug out my old Netgear DG834G and connected that up in place of the Belkin - it worked. Next connected in the Netgear powerlines and it still worked.
    So, the problem is the relatively new Belkin F7D4401 router.
    Looks like I will have to find an alternative 802.11n...
    Thanks for your help.
    Regards
    Simon

  • Can the Time Capsule hook up to a stereo like an Airport Express?

    Can the Time Capsule hook up to a stereo like an Airport Express?

    No, the Time Capsule has no audio ports or jacks on the device.

  • Trying to add HP Photosmart C4280 via airport express. "Add Printer" correctly finds printer as Bonjour kind but "add Printer" cannot find printer software from Apple

    trying to add HP Photosmart C4280 via airport express. "Add Printer" correctly finds printer as Bonjour kind but "add Printer" cannot find printer software from Apple (although it says that the software is available from Apple)

    Rfh723-
    You are technically way ahead of me, so I can't argue with what you did.
    How about an even simpler WiFi network consisting of only the AirPort connected by an Ethernet cable to the printer?  If the iPad still can't find the printer when connected to this network, then something is broken!
    (Also try a different Ethernet cable.)
    Fred

  • I play music on my hi fi via an airport express attached to my iMac. Since installing maverick the sound quality is terrible and I get frequent distortion, which never happened before. I have reset the airport express and reconfigure my wireless settings.

    I play music on my hi fi via an airport express attached to my iMac.
    Since installing maverick the sound quality is terrible and I get frequent distortion, which never happened before.
    I have reset the airport express and reconfigure my wireless settings. I have also used Ethernet on its own but still get the same sound problems.
    I would love to turn itunes sound off as you used to be able to do, but this I believe can't be done.
    Has anyone else been having the same types of problem, and better still has anyone got the answer?

    When the AirPort Express Base Station (AX) is connected by Ethernet, you will find an option in the AirPort Utility, labeled: Enable AirTunes over Ethernet on the Music pane. Just select this option to allow streaming iTunes via the AirPort's Ethernet port. You should also be able to disable the AX's wireless so that it shouldn't interfere with the nearby TC.

  • I am trying to get the CLIPPINGS add on for firefox. but it says it is not compatible with FirFox 8.0 whaat can I do.

    I am trying to get the CLIPPINGS add on for firefox. but when I try and download it, it says it is not compatible with FirFox 8.0. also the latest version of firfox is 3.1 but my version is 8.0 Is that right?

    There were some issues with the addons site and checking for (compatibility) updates.<br />
    It seems to be working now, so you can try again to install the extension.

  • Trying to get Airplay Music to play via Airport Express

    I have An Airport Express Connected to some speakers, And on my Iphone I can goto Airplay and choose to play the song on the Airport Express, but for some reason it never plays. I'll Hit play & it'll wait a second then jump back to Pause, When i tried to use Pandora it popped up an error message. But when i go into itunes i can play the song on my Airport Express.... It's just Airplay thats not working, Please Help. Thanks in advance.

    Same problem here. I'm trying to stream music from my iPhone 4 via Airplay to my Airport Express and nothing happens. Works fine with my MacBook though... I rebooted both devices but still having the same problem. Does anyone know what to do?

  • Error when trying to extend network from airport express to airport express

    I have an airport express in my house.
    I am trying to connect another airport express to extend the network.
    I am following the instructions but keep getting an error when it is resetting itself. I have done a hard reset on the airport express so it is in its default settings.
    I see both airports in the left window of the Airport Utility Application.
    I select the New Base Station and select Switch to switch the networks.
    I then rename and add a password to the new airport express. (continue)
    I then select "I want Airport Express to join my current network" (continue)
    I then select "Extend the range of my Airport Extreme or Airport Express network" so I can extend the internet connection (Continue)
    It then asks me to choose the Airport Express network I want to extend - I get a choice of my "Cameron Network" or "Apple Network xox##xo" which is my new Airport Express. I'm selecting "Cameron Network" - my current wireless internet connection. (Continue)
    I am then asked to select the Apple wireless device I want to join from the list.
    The only option is "Cameron Airport Express" (OK)
    I then get a message "Configuring main network for a new WDS remote"
    I then get an error "There was an error setting up this Apple Wireless Device for WDS. Quit AirPort Utility and try again"
    I've tried 10 times.
    What am I doing wrong??
    Thank you in advance for your help!

    It sounds like you have an older "b/g" Airport Express (AX) and you have configured the device to "join" your wireless network. When the "b/g" AX is configured this way, the ethernet port is not active.
    Follow the instructions to setup a WDS arrangement with both of your AX devices. One must be configured as a WDS "main" and the other as a WDS "remote".
    Apple's step by step instructions to do this are found on pages 42-44 in the Designing AirPort Networks Guide
    If both of your AX devices are newer 802.11"n" devices, you can use a different type of setup. Post back to confirm if that is the case.

  • I have 2 routers in my set up.  The COX internet is hooked into the dlink and then an airport express is off the dlink router.  I can password protect the airport express but have been unable to password the dlink.  I've been into preferences.  Doesnt wor

    I have a dlink hooked to the cox cable and then an airport express to the dlink.  I am able to password the airport but not the dlink.  I;ve tried the preferences mode and it won't take.  HELP

    As you might imagine, this is a support site for Apple networking products.
    Did you have a question about an AirPort Express?
    If you need help with a D-Link product, you should post your question on a D-Link support site like the one below:
    http://www.iyogi.cc/routerlp/5621063/Router/d-link-router-support.html

  • Trying to print from a Windows XP laptop to a Mac Home Network

    Help! I have a home wireless network (netgear) using a DSL line. I have an iMac G4 and an iMac G5 cabled to my wireless router and I have an iBook G4 running wirelessly on the network. In addition, I have an Epson C84 cabled to my iMac G4's USB port. All the computers can print flawlessly to the C84 using printer sharing in OS X 10.4.6. My problem is this: I also have a Windows XP laptop that uses this home network for internet access (which it does with no problem) but I want to be able to print to the C84 printer as well from the Windows laptop. I cannot seem to make it work. I have turned on "Windows" and "Printer" Sharing in OS X preferences and I have also tried loading "Bonjour for Windows" from Apple onto my XP laptop but that doesn't work either although it seems to "see" the printer - but gives me a connection error message and won't print.
    Does anyone have any suggestions? Thanks.
    iMac G5   Mac OS X (10.4.6)  

    Are you running the windows firewall?
    Try this: http://docs.info.apple.com/article.html?artnum=301514

  • Is it possible to get regular computer audio via AirPort Express?

    Is it possible to get regular computer audio (audio from websites, MacBook, etc.) on my speakers which are connected to my AirPort Express? Or is the only audio I can hear on my connected speakers the music that is on my iTunes?
    Just obtained AirPort Express last night and was dissapointed that only the music on my iTunes plays on my connected speakers and not the normal/regular audio from websites and/or my MacBook.

    Hello Brody675. Welcome to the Apple Discussions!
    Check out Rogue Amoeba's AirFoil.

  • PBG4 tries to connect via airport express, but I want it to use ethernet!

    Hey y'all, and thanks in advance for your help!
    I use airport express to connect itunes to my stereo, and for nothing else. My computer, however, keeps trying to connect to the internet through the airport express, and I end up having to turn the airport off until I'm on a website, then turn airport back on.
    How do I tell my computer to NEVER attempt to connect to the internet via airport, and to ONLY use ethernet to connect???
    Thanks again!

    Click here and follow the instructions.
    (41434)

  • Trying to get laptop to use printer hooked up to my PC.

    i have a Hp pavilion g7-1227nr laptop and a HP photosmart C5580 printer. i have downloaded every HP solution for the printer but nothing will let me print from my laptop (wireless)  to the printer that is hooked up to my PC. Both of my children have HP laptops and they cannot get their laptops to print to the printer either. Any suggestions?

    Hi sonewald1,
    hope you are doing well and sorry to learn that you are having this issue.
    Have you shared the  printer in your network? you have to do this in order to be able to use the printer from other computers unless you have a router that is capable of been used as a printer server which you can check on your router's owner manual.  
    Follow this; 
    Click on Start in the bottom left corner of your screen. A popup list will appear.
    Select Control Panel from the popup list. Type the word network in the search box.
    Click on Network and Sharing Center.
    Click on Change advanced shared settings, in the left pane.
    Click on the down arrow, which will expand the network profile.
    Select File and printer sharing and choose Turn on file and printer sharing.
    Click on Save changes.
    You're now ready to share your printer.
    Click on Start in the bottom left corner of your screen. A popup list will appear.
    Click on Devices and Printers, from the popup list.
    Right click the printer you want to share. A dropdown list will appear.
    Select Printer properties from the dropdown list.
    Click on the Sharing tab
    Select the Share this printer check box.
    In order for other people to connect to the printer, they just have to add the network printer that you just opened for sharing to their computers. Here's how to do this.
    Click on Start in the bottom left corner of your screen. A popup list will appear.
    Click on Devices and Printers from the popup list.
    Select Add a printer.
    Click on Add a network, wireless or Bluetooth printer.
    Click the shared printer.
    Click Next. Continue according to the instructions on the screen [source: Microsoft].
     Hope it helps; 
    RobertoR
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Maybe you are looking for