Trying to install a setup on a 64 bit machine with Windows server 2012 R2 which writes to registry FAILES

My msi is a 32 bit setup.
When I install it on a 32 bit machine with Windows XP it works fine .
I tried to install it on a 64 bit machine with windows server 2008 and it succeeds
While running my setup on a 64 bit machine with Windows server 2012 R2 it failes and I get the folloawing message:
"Registry object reference not set to an instance of an object"
Then the setup exits and leaves the app partially installed
I tried searching for known problems over the net, but found nothing
I will be happy to get some advice
Thanks
Liora

Sounds like you are trying to update a registry object that is not there.
Is this your own msi, or is it from a third party application? If third party, check with them to see if they support it on 2012 or if they have a known workaround.
If it is your own msi, sounds like it is time to debug it.
.:|:.:|:. tim

Similar Messages

When trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas

when trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas

JJMack <[email protected]> wrote:
=============
JJMack created the discussion
"when trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas"
To view the discussion, visit: https://forums.adobe.com/message/7092876#7092876

Trying to install Visio Professional 2013 on 64 bit machine but install says I have 32 bit office

I am Trying to install Visio Professional 2013 on 64 bit machine but when I try to install it says I have 32 bit office already installed. How do I know if I have 32 bit Office installed, and if so how do I change it to 64 bit.
And how do I install 64 bit Visio ?

I believe for most users the 32-bit version of Office is recommended due to compatibility issues (see http://office.microsoft.com/en-us/word-help/choose-the-32-bit-or-64-bit-version-of-office-HA010369476.aspx) so that is likely the version you have.
If you only have the install media for 64-bit Visio then you may want to see what you can do to exchange it for 32-bit if possible - the only option for creating a 64-bit version of Office is to uninstall the 32-bit and install 64-bit separately.
(You can tell quickly if your current Office is 32- or 64-bit by looking at the directory it is installed in - 64-bit programs get installed in "c:\Program Files" while 32-bit programs get installed in "c:\Program Files (x86)"
Good luck!

SCORM (flash Player Content) not working on Windows Server 2012 R2 which has IE11 integrated installed on it.

Hi Everyone,
I have website which contains SCORM package, installed on Windows Server 2012 R2 which has IE11 installed on it.
Flash Player is also embedded with IE.
IE Version: 11.0.9600.17278.
Updated Version: 11.0.12 (KB2977629)
When I launch SCORM (flash Player Content) from my application, it is not working. It just displays a blank page however the Title of IE is set to the text from the SCORM content.
However if I access the same URL from any other machine which has previous version of Windows OS (i.e. previous to Windows 8 OS), it is working as expected on IE9, IE10 and IE11.
While trying to find out the cause, I came across some forum which says we have to install the “Desktop Experience” on the server to enable the inbuilt flash player. After doing that also, My SCORM contents are not getting displayed.
To find out more details, I have uploaded the SCORM Package on SCORM Cloud to check if it is working there. Here again the same problem, it doesn’t work and displays
error message saying that “Member is not found” and when I tried to find out the location of the error then it is coming at
Windows.document.myFlash.setVariable(…) method on the Windows Server 2012 R2 with IE11.
When I performed “Addwatch”, it is saying that Windows.document.myFlash doesn’t have setVariable(…) method.
However if access the same cloud URL from other machine (Having OS previous to Windows 8 OS), it is working as expected.
I have attached the screenshot of the error.
Any help would be appreciated.
Thanks

Hello,
I'd ask the SCORM package provider or in Microsoft's ASP.Net forums:
http://forums.asp.net/
As Microsoft's ASP.Net forums are on a different platform, we cannot move the question for you.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Install Captivate 4 on Windows 7 64-bit machine with Windows XP mode?

Hi,
I have been searching the web to find out the best way/place in which to load Captivate 4 on my Windows 7 64-bit machine. Seems some people have issues with recording, others don't. I have Windows XP mode on my machine.
My question is... what's the best way to load Captivate 4 on Windows 7 - should I install to Windows 7 and see how it goes. Or should I install under Windows XP mode?
Thank you!
Michele

Yea it works in XP mode
Daniel Wooden
Systems
U.S. District Court Middle District of Tennessee
615-736-7485
From:   RodWard <[email protected]>
To:     DEW45 <[email protected]>
Date:   09/24/2011 12:01 AM
Subject:        Install Captivate 4 on Windows 7 64-bit
machine with Windows XP mode?
Re: Install Captivate 4 on Windows 7 64-bit machine with Windows XP mode?
created by RodWard in Adobe Captivate - View the full discussion
Try running Cp4 in WinXp compatibility mode on Win7. Also make sure
you're set to Run as Administrator.
I run Cp4 on Win7 without issues. But other users report similar problems
to yourself. In the end, it may or may not work for you because Adobe has
never claimed Cp4 was compatible with Vista or Win7 64bit.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3935593#3935593]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3935593#3935593]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Captivate by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

Unable to install Client Tools for Sybase ASE 15.7 on Windows Server 2012 64-Bit

Hello Folks,
I just downloaded the client tools package from https://support.sap.com/swdc --> Installation and Upgrades --> A-Z list --> SAP ADAPTIVE SERVER ENTERPRISE --> SYBASE ASE 15.7 --> Installation --> Microsoft Windows --> 51044415.zip
I'm trying to install the client tools for a newly provisioned Windows 2012 64-Bit machine. After unzipping the folder and running autorun, the installation does not proceed. When I go to pcclient64 and run either setup.exe or setupConsole.exe, I get the error "This Application has Unexpectedly Quit, Invocation of this Java Application has caused an InvocationTargetException. This application will now exit. (LAX)". I stumbled across various posts on the forum, and it appears that the installer is not certified for Windows Server 2012. I tried using the compatibility mode for Windows 7, and it proceeds further and launches the SAP GUI; however, it closes afterwards.
Any suggestions would be greatly appreciated. Thanks in advance.

Hi,
51044415 is a PC-Client 15.7 refresh.
You are using a version that was not certified with Windows 2012. Get the most current version PC-Client 15.7 SP130 or SDK 15.7 SP130 or SP132.
If your looking for PC-Client5.7 SP130 look for EBF23439
We didn't get certified with Windows 2012 until SDK 15.7 ESD#6 even with that I reported a few minor issues.
You need the following on the machine before the installation.
Microsoft Visual C++ 2010 Redistributable Package (x64)
Microsoft Visual C++ 2005 Redistributable Package (x86) (or dsedit and ocscfg will not work)
Microsoft Visual C++ 2005 Redistributable Package (x64) (or dsedit and ocscfg will not work)
Thanks,
Dawn Kim

Is it possible to install SQL Server 2012 Standard Edition on a Windows Server 2012 Standard Which is installed on a Virtual Machine that is created by Hyper-V?

Hi
I have recently bought a Virtual Machine from a data center and installed a Windows Server 2012 Standard Edition on it. As I tried to install the SQL Server 2012 Standard Edition, the data center administrator denied me to do this telling me it is not possible
to install any licensed Microsoft software on a Windows installed on virtual machine created by Hyper-V. It was really strange for me! I wanna know if this is true.
Thanks Everybody

Hi Farid,
For SQL server running on virtual server please refer to following article :
http://blogs.technet.com/b/peeyusht/archive/2010/03/19/sql-licensing-under-virtualization.aspx
In addition , for license issue we still recommend you to contact MS Activation Center:
http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Unable to install WSUS Updates KB720211 x64 and KB2734608-x64 on windows server 2012 r2 standard

Hi,
Am testing SCCM 2012 R2 in virtual environment. To handle Windows 8 clients, need to install KB2734608 update, which is failing.
Not able to install WSUS Updates KB720211 x64 too. The server is on Windows Server Standard 2012 R2 x64.
Any help will be appreciated.

Hi,
Agree with Michael. KB2734608 is applied to the WSUS 3.0 SP2. If we install the WSUS on Windows Server 2012 or later, the version of the WSUS becomes to v6.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I setup Active Directory and Group Policy on Windows Server 2012?

I work for a school district that uses a Windows 2012 server with about 400 Windows 7 PCs and 150 Mac PCs. We are set up with Roaming Profiles on the PCs and would like to be able to setup Active Directory, Group Policy, and Roaming Profiles on our macs. (We also have a mac server that they are using as a file server only) As we are a school, our funds are very low. Now for the questions...
Is there a software that allow us to accomplish this?
Is there a free solution or a very reduced price option to do this?
I heard that http://www.centrify.com/products/mac-edition.asp may accomplish this and I read something about it on here but didn't know if this is what I was really trying to do becuase it was marked as "The Golden Triangle" and did not mention Raoming Profiles. This is the link though: https://discussions.apple.com/message/17200059#17200059
Any help would be greatly appreciated.

The above reply does not take into account that I am trying to use GROUP POLICY EDITOR to make it the default browser.

Error during configuration process while installing obiee 11.1.1.7.0 in windows server 2012

HI..
I'm having an issue while installing obiee 11g(11.1.1.7.0) in windows server 2012 and using the database as ms sql server 2008. During configuration process after the installation process is completed , here the process is stopped at "Step:executing opmnctl start configuration_obisch1" status "failed"
Here is the error:
Error
    opmnctl task failed
    Step Executing: opmnctl start coreapplication_obisch1 failed
    Configuration Action "Executing opmnctl start coreapplication_obisch1 " has failed. please check log files...
any help would be great
thanks..

Friend,
Installer file size is:
Size: *1.23 GB (1,323,085,837 bytes).*
Size on disk: *1.23 GB (1,323,089,920 bytes).*
I tested also disabling antivirus on my PC and disconnect the power cord before starting the installation of JDeveloper. In both tests the result was the same.
Some additional recommendations to solve this case.
Thank you for supporting.
Edited by: Luis_vkacito on Nov 15, 2012 6:48 AM

Unable to Install Windows Server 2012 R2; system aborts and reboots after first blue Windows logo appears

System: Dell PowerEdge sc1420 with dual xeon and Adaptec 2420SA SATA RAID (supported by OS); 10 GB memory (2x4, rank 2, organization x4, in DIMM1 & DIMM2; 2x1, registered, organization x8, in DIMM3 & DIMM4)
This computer is currently running Windows Server 2008 R2 Enterprise which was installed with no problems.
Objective: clean install of Windows Server 2012 R2 Standard on an otherwise unused RAID array disk set.
All attempts to boot from DVD result in loading of files (grey progress bar on bottom of screen), brief dark screen, then black screen with a blue windows logo for about 2 seconds and then a flash of about 10 lines of error notifications on a black screen
for about 1/4 second (unreadable), and then a reboot of the computer.
Coreinfo.exe confirms that cpus DO support NX and PAE; do NOT support VMX (virtual machine enhancements).
Attempts to run memtest.exe from boot disk tool-menu startup result in an error message that the memtest.exe file is corrupt.
Running memtest.exe from Windows 2008 R2 install disk results in all memory tests passed!
Attempted booting with multiple DVD's (some +R, some -R, all verified) burned from .iso. These DVD's were used successfully to install Windows Server 2012 R2 on an HP Pavilion. Also changed DVD drives just to rule out DVD hardware.
Running CHKDSK from Windows 2012 R2 on HP Pavilion shows no problems; running CHKDSK from Windows 2008 R2 on the Dell system on the same disks shows some problems. Running checkdisk on the Windows 2008 R2 install disk from the Windows 2008 R2 installed
system shows no problems. All disks burned and verified on same system.
Also attempted to boot from USB thumbdrive with copy of DVD on it. Same results: system loads files then reboots at first Windows logo. So that would rule out disk quality issues per se??
Started to try an upgrade rather clean install to see if any errors were announced. None were announced as the system went through much of the process. I aborted somewhere along the way before committing to the upgrade because 1) the most likely
outcome was it would not boot after install (I don't really need the practice in restoring); and 2) even if it did reboot, having a system that can't be repaired by booting the install disk is pointless.
All disks and raid arrays are recognized and usable by RAID controller card and by Windows Server 2008 R2. Disks are within spec for use with Adaptec 2420SA (1TB @ 300).
Is VMX (aka VT-x) actaully required for ANY install even though Hyper-V is not intended to be used? If so, it is too bad that the Microsoft system requirements (
http://technet.microsoft.com/en-us/library/dn303418.aspx ) don't make that clear. And lack of VMX support really doesn't explain the memtest.exe "corruption" issue.
Or is it maybe something unique about the files on 2012 R2 disk (or disk image on USB) that are causing some problem with the chipset processing? But why?
My vote would be for the latter of the issues, but I have no clue why or if it is remediable. Suggestions?

So here is what I think is the final understanding of this problem:
First, one additional piece of important information: The computer successfully moves into and through the Windows Boot Loader phase and succeeding phase ONLY for Windows 8.1 32-bit, but NOT for Windows 8.1 64-bit nor for Windows
Server 2012 R2 (only 64-bit).
The Windows Boot Manager phase (which precedes the Windows Boot Loader phase) is either 32-bit or 64-bit (64 –bit for this case) and is loaded by the 16-bit stub program (Bootmgr) which starts in real mode.
Windows Boot Loader of course runs in either 32-bit or 64-bit (64 –bit for this case) according to the product being installed.
By inference, the essential problem is occurring in conjunction with the loading of a WIM file to start the Windows Boot Manager.
The boot manager starts ok and generally shows its essential screens (Windows Boot Manager; Advanced Boot Options) or proceeds to load files for transition into Windows startup in the succeeding Windows Boot Loader phase (that doesn’t “boot” but rather
loads the system). This is best confirmed by the announced corruption of the memtest.exe file when selecting Windows Memory Diagnostic from the Windows Boot Manager Screen.
If allowed to continue loading files to pass control to the Windows Boot Manager, the type of abort and resulting immediate restart that occurs is that which you would associate with unhandled cpu exceptions (invalid instruction, memory out of range,
wild interrupt, etc.) that most of us have not commonly seen for 20 years (since beginning to use well behave OS’s from Windows NT 3.1 and on).
So, the problem obviously is due to a failure to properly mount the WIM file and/or properly access it (probably the latter) when running in 64-bit protected mode.
This is independent of the hardware on which the install disk is actually mounted (DVD or USB-flash), so it is NOT a hardware problem
per se.
Since the WIM is mounted early in the process, Boot Manager may well have loaded it using BIOS routines to access the physical device on which it resides rather than loading 32-bit or 64-bit drivers of its own.
Hence, if the BIOS does not “mount” the WIM in a way that is later fully compatible with access from the 64-bit systems being loaded, it could cause apparent file corruption.
If it is only partially incompatible some functionality may appear quite usable (like loading files) until later detected.
This is vague on my part, because the exact nature of the incompatibility cannot be readily determined from the information available.
But the consequence is the same: the system cannot boot from the install disk, either for initial installation or repairs.
Incidental conclusion: The 64-bit boot manager code for Windows Server 2008 does not exhibit this faulty behavior, but the 64-bit code for Windows Server 2012 does.
So the problem is not inherent with loading 64-bit server OS’s.
Expectations: If the system were to be upgraded using the features of the install disk while running an installed OS, say Windows Server 2008 R2, it might well succeed and yield a fully functional system upgraded to Windows Server 2012
R2 (because the installed operating system is started from discrete files, not from a WIM file).
However, in order to perform a disaster recovery using Windows resources (such as image backups from Windows Server Backup), one would have to presumably boot from a Windows Server 2012 64-bit install disk or Windows Server USB recovery drive.
Of course we know that the Windows Server install disk will not boot and we can be fairly sure that the problem will migrate to any Windows Server USB recovery drive that is created.
My inspection of a Windows 7 System Repair CD shows that is based exclusively on boot.wim, not discrete files!
Of course a generated image for a WIM for Windows 2012 USB recovery drive
might not have the flaw that drives this behavior, but it probably would.
Problem conclusion: A BIOS upgrade would be required for compatibility with Windows Server 2014 clean installation
and any maintenance; and none is available from the OEM.
Problem not resolved, but understood for future reference.
Thanks to Tim whose comments helped me focus my thinking.

Installing Windows Server 2012 on W510

I realize this is not likely to be a common scenario, nor a supported one. I'm installing Windows Server 2012 (Evaluation edition) on a w510 to use as a learning lab. In case anyone else decides to head down this road I've documented what I've run into so far.
System: Thinkpad W510 43192NU
Upgrades: 16GB RAM, Crucial M4 256GB SSD.
The basic install happened quickly and easily, but as expected there are a couple of driver issues.
Installed Windows Server 2012 Standard 180-day EVAL from DVD (ISO obtained from Technet 10/15/2012)
Installed available Windows Updates (only 2 as of October 25, 2012)
Installed Lenovo nVidia discrete video driver for W510 Windows 8 64bit
(getting braver here)
Installed Thinkvantage System Update 5.0 for Windows 8 64bit
Ran System Update and it found 3 available items:
Intel Management Engine Interface 6.2 and Serial Over LAN (SOL) driver downloaded and installed
Audio Driver for Windows 8 32/864 <--SIC Downloaded and installed
ThinkVantage Active Protection System (64bit) <-- did not download / unsuccessful
At this point there are also 3 items still listed under "Other Items" in device manager:
Looked up device IDs in Properties, ran through driveridentifier.com:
Base System Device (I think its the Ricoh Mulit-Card Reader)
Device Name:
Base System Device
Hardware ID
PCI\VEN_1180&DEV_E230&SUBSYS_213417AA&REV_01
PCI\VEN_1180&DEV_E230&SUBSYS_213417AA
PCI\VEN_1180&DEV_E230&CC_088000
PCI\VEN_1180&DEV_E230&CC_0880
Compatible ID:
PCI\VEN_1180&DEV_E230&REV_01
PCI\VEN_1180&DEV_E230 <---- Device ID matches with our database
PCI\VEN_1180&CC_088000
PCI\VEN_1180&CC_0880
PCI\VEN_1180
PCI\CC_088000
PCI\CC_0880
Current Status: Detected and installed using the Windows 7 driver from Lenovo
Broadcom Bluetooth Device
Device Name:
ThinkPad Bluetooth 2.1 with Enhanced Data Rate II
Hardware ID
USB\VID_0A5C&PID_217F&REV_0360
USB\VID_0A5C&PID_217F <---- Device ID matches with our database
Compatible ID:
USB\MS_COMP_BLUTUTH&MS_SUBCOMP_1112EDR
USB\MS_COMP_BLUTUTH
USB\CLASS_E0&SUBCLASS_01&PROT_01
USB\CLASS_E0&SUBCLASS_01
USB\CLASS_E0
Current Status: Unresolved. Windows 7 driver failed, OS complained about compatibility issues.
Unknown Device <-- That is how its listed under device manager
Device Name:
ThinkPad PM Device
Hardware ID
ACPI\VEN_IBM&DEV_0068
ACPI\IBM0068
*IBM0068 <---- Device ID matches with our database
Compatible ID:
Version
1.43.0.0,2007-05-31
Current Status: Unresolved. Installed Windows 8 Lenovo Power Management driver without errors but did not fix. Item still listed under "Other device"
At this point I have it where I need it to be. All I want to do is have a stable basic install so I can install Hyper-V and play around with a bunch of VMs. For that I don't really need Bluetooth or enhance power management.

Camarones wrote:
Have you found a solution to the driver issues I mentioned?
I had no issue installing the Windows 7 x64 power management driver and Power Manager. Just keep in mind it is only for control of the CPU clock speed and a few other settings. With Hyper-V installed, you lose sleep/hibernate and resume.
Bluetooth won't work
I never had a use for multcard.
With Windows Server 2012 be happy you have networking and a video driver which are the core things you need. If you want a full on workstation, move to Windows 8 Pro and Hyper-V.

Error while installing Microsoft Identity Extensions Setup during installation of SharePoint Foundation 2013 on Windows Server 2012

Hi All,
When i try to manually (no internet connection on the server) install SharePoint 2013 Prerequisites on Windows Server 2012 I get the below error
I have installed .Net Framework 3.5, 4.0 and Windows Identity Foundation using Add server roles or features from the server manager.
From Software & Hardware requirements for SharePoint 2013 give
Prerequisites for SharePoint 2013 I can see that the identity extensions are available only of Windows Server 2008 R2 and not for windows server 2012. Can you please provide the link for windows server 2012?
I have installed all the prerequisites required except Microsoft Identity Extensions.
Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
Disclaimer: This posting is provided "AS IS" with no warranties.

I fixed it by installing Microsoft Identity extensions from command line, please find command line below.
C:\Windows\System32>msiexec.exe /i "C:\SharePoint2013ServerFiles\prerequisiteinstallerfiles\MicrosoftIdentityExtensions-64.msi" /quiet /norestart
Note: In the above command C:\SharePoint2013ServerFiles\prerequisiteinsTallerfiles is the path where I had downloaded all the prerequisites for SP2013
This will install Microsoft Identity Extensions and creates registry entries, which will help the SharePoint 2013 Prerequisite installer to complete the setup
For more details check out
here
Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
Disclaimer: This posting is provided "AS IS" with no warranties.

I am trying to install Adobe premiere elements 8 on my new computer (Windows 7). The program ansvers with "the program not installed or can be damaged".

I am trying to install Adobe premiere elements 8 on my new computer (Windows 7). The program ansvers with "the program is not installed or can be damaged". Then aborts the installation.
It`s right, the program is not istalld, it is what i`m trying to do. And there is no problem whit the DVD. Any suggestions?

"Error 1303: Installer has insufficient privileges" or "Error 1304: Error writing to file" | Install | CS3, CS4, CS5 pro…
this link FIXED MY PROBLEM! i did the steps to the programdata\adobe folder and it installed FINE!

I am getting error 205 while trying to install Creative Cloud. I already had chated with support, Uninstalled CC and tried to install it again. From the Adobe site, the page keeps loading eternally, from the previous installer, it gives me error 205. What

I am getting error 205 while trying to install Creative Cloud. I already had chated with support, Uninstalled CC and tried to install it again. From the Adobe site, the page keeps loading eternally, from the previous installer, it gives me error 205. What to do? Give up on CC?
This is not the first time I get it, and it seems a recurring problem.

Milliet are you on a managed network? If not then please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve error 205.

Trying to install a setup on a 64 bit machine with Windows server 2012 R2 which writes to registry FAILES

Similar Messages

Maybe you are looking for