Trying to install Final Cut Studio/Pro that was on my old Mac Pro. Have old disks and upgrade but need to know the install sequence.

My old Mac drive died and bought a Air. Trying to install Final Cut but bumping into error on trying to install Studio. I have an upgrade to Pro but I have been told that I need to install Studio first. I have all the original disks.

Final Cut Studio 2 has a "bug" in the installer program that results in the "PowerPC" dialog box.
There are two alternative methods to install into Mavericks:
Use Pacifist:
http://www.charlessoft.com/
Use Jeremy Johnstone's Terminal method:
http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html
Be sure to follow the August 2012 comment for the remaining FCS2 disks for this second method.

Similar Messages

Final Cut Studio is crashing a lot using a Mac Pro (nehalem) 2009

Greetings,
I have a video workstation based on a Mac Pro (2x2.26GHz Quad-Core Intel Xeon Nehalem, 6 GB RAM, 640 GB HD, 512 NVIDEA VRAM) with a Blackmagic Decklink HD Extreme 2009 and an Highpoint RocketRAID 4322 card (properly connected to a RAID 5 array).
I'm editing, with Final Cut Studio 3, a big TV project with some TGA and loads of HD XDCAM EX 35mbs video footage.
*What is happening wrong?*
Final Cut Pro is crashing to many times and dont let me work with the flow that is supposed. I start to work and i do a bit of scrubbing in the timeline and suddenly the rainbow spyral starts to spin and kaput! FCP just crashes.
I've tried to many things. Re-installing everything from the baseline, plug out the 2 PCIe cards (and not even the drivers are installed). Even so FCP still crashes with the project.
Funny thing is... This symptom only happens with the Nehalem Mac Pro. I have another station based on a Mac Pro 2x2.66 GHz Dual Core Xeon 3 GB RAM 2006 and when i run the project... everything works fine. FCP here doesn't crash.
This is what makes me believe that the problem must be with the new Mac Pro.
I have the reports generated by the FCP after the crash. You can find it here:
http://www.ideiascompernas.com/reports/
I'm getting frustrated because i've invested big in this workstation, safe in the knowledge that it was going to be stable to complete my requirements.
Is there anything that i or Apple can do to resolve my problem. Is it the processor? Extended Hardware Test says that everything is ok.
I'll be waiting,
best regards, thanks,
Pedro

You may want to also post here:
Final Cut Studio forum:
http://discussions.apple.com/category.jspa?categoryID=123
Content creation with Final Cut Studio
http://discussions.apple.com/forum.jspa?forumID=1137
I see you have the GT120, not a very nice card really but maybe it is 'enough.' I'd upgrade. To ATI Radeon 4870, once you get it stable and working.
http://discussions.apple.com/thread.jspa?messageID=10251193&tstart=0
I see your crash is kernel panic actually.
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
Crashed Thread: 194
Almost always that is memory related, are you seeing parity errors?
Watch System Profile - Memory tab
Replace the RAM (I'd even up it to more memory, 6 x 2GB is what I would have configured for)
Have you tested your RAM? run Apple Hardware Test?
Disabled ALL USB and Firewire devices?
Is the RR4322 okay to run in slot #2 (16x) rather than in slot 3 or 4 (4x)?
Getting RAM replaced, advanced exchange, or go out and getting some Kingston or Crucial etc for your system, and swapping, really is one good method, trial and error, to find the cultprit or rule out RAM.
Errors like this can mean flushing your caches is a must, and possibly due to errors and crashes, clean system install, checking data (both time consuming) and being careful to recheck your drives with Disk Warrior and/or TechTool Pro 5 to insure there are not any corrupt files (not perfect either which is why restore the system from known good backup image can be a must).

Final CUt Studio 2 will not run on my Mac Pro & Macbook Pros simultaneously

I was under the impression that the licensing contract for FCPS2 allowed for the software to be installed and run on a desktop and a portable machine simultaneously. Am I wrong? I purchased Final Cut Studio 2 legally, and have installed it on my Mac Pro and my Macbook Pro, but if I try to open one of the FCS apps while one is running on the other computer, I get a protection error message and have to shut down the app. Does anyone know a workaround to this other than shutting off airport on one of the machines?

I was under the impression that the licensing contract for FCPS2 allowed for the software to be installed and run on a desktop and a portable machine simultaneously. Am I wrong?
Yes, you are wrong.
The license allows for the installation of a copy on each machine but they can not run simultaneously. The intention is to allow users to work with a laptp while away from the main editing machine. If you need the capability running two copies at the same time, buy another copy.
Good luck,
x

Problems installing Final Cut Studio on my new Macbook Pro

I just got my new 17 inch Macbook Pro, and am trying to install Final Cut Studio 3. It installed just fine, and accepted the serial number. The problem is that every time I open the application, I have to reenter the serial number. Once I do that, it runs fine, but the next time, I have to reenter the info again. Anyone have an idea of how to fix this?
Rob Krampf

do some searching here. I remember other people having this problem. You might also try repairing permissions on your startup drive, deleting your fcp preferences
https://discussions.apple.com/docs/DOC-2491
And creating a new account in system preferences: accounts.

Need Help Installing Final Cut Studio Version 2.0.1 on Macbook Pro

I am trying to install an old version of Final Cut Studio (Final Cut Studio Version 2.0.1) on my macbook pro (OS X Mountain Lion). When I tried to install it, it said, "power pc applications not supported on this computer". I was told to "uninstall" OS X on my computer, install Final Cut Studio, and reinstall OS X Mountain Lion again. Is this true? If so, how do I do this?

There is a "bug" in the installer application of Final Cut Studio Pro 2 that will fail to work in Lion or Mt. Lion; it will work successfully in Snow Leopard and a subsequent upgrade to Lion or Mt. Lion after the successful installation of FCSP2 will continue to work.
Once Mt. Lion is installed you can use one of these two methods to install FCSP2:
1) Pacifist
2) Jeremy Johnstone's Terminal method:
http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html

How can I install Final Cut Studio 2 on my new MacBook Pro with Lion?

I just purchased and received a new 15" MacBook Pro (non-retina) last week. I need to install Final Cut Studio 2 on this computer. I have researched this and found that I need to install Rosetta from the Snow Leopard DVD in order to do this. This is the first Mac I've bought ( although I've been working with them for years), so I don't have a Snow Leopard DVD. I am a high school teacher and we use FCS 2 for my classes so buying FCP X is not a viable option for me since I teach FCP 6. The iMacs we use in school run Leopard and were never upgraded to Snow Leopard (budget cuts and all), so I can't even borrow one from my district.
Does anyone know how I can obtain Rosetta? Or another way to install this without it?
Thank you ! :)

There is no way to add Rosetta support because it is not supported by OS X Lion at system level. This has been documented before the release of OS X Lion by itself.
If you really need Final Cut Studio 2, I would return your computer if possible, and purchase a Mac that is capable of running Snow Leopard (all 2010 models, early 2011 MBP and some other 2011 models)

Can i install Final cut studio 5 and DVD Studio Pro 4 on OSX lion

Is any body who can help me on giving me some direction on how to install Final Cut Studio 5.1 and DVD Studio Pro 4 on my OSX Lion, if it's doable. Thanks

The easiest way is to install Rosetta from a Mac OS X 10.6 DVD first.
There's also a way of doing it via Terminal that's been posted here a couple of times. A search should bring that up.
Edit: Found it... https://discussions.apple.com/message/21416133#21416133 read the second post.

Re installing Final Cut Studio on my NEW Mac pro?

I originally purchased Final Cut Studio (on a G5 Power PC), Then installed the universal crossgrade,
then installed Final Cut Studio 2. Now I have a New Mac Pro (Intel Chips) How do I go about
reinstalling FCS? do I need the original serial key from the first version or do I just use my
FCS 2 serial Key?
J>H<L

J>H<L
You'll need both keys, but you only have to do one installation.
The FCS2 installer will ask for the FCS2 key. If that passes, another window will open asking for the FCS key. If that key passes, then it's just a normal installation.

What do I need to do to install Final Cut Studio version 2 on a new Mac Book Pro

What do I need to do to install Final Cut Studio version 2 on a new Mac Book Pro that does not support power PC anymore

You need to install Rosetta from a OSX 10.6 install disk.
FCS2 is intel native, it is only the installer that requires PPC support.
x

Problem installing Final Cut Studio 2 on MacBook Pro

I'm trying to install Final Cut Studio 2 on a MacBook Pro / Snow Leopard but when it comes to choosing install options Final Cut Pro is greyed out and just says skip.
I've done some research and found people with the same problem but none of the fixes I've seen have worked. I also have Logic Pro installed - which I installed first - which seems to be causing the problem. I've tried removing Logic but am still seeing the same problem.
Besides a clean install does anyone have any suggestions?

Read this article on how to install final cut pro after logic studio.

Cannot install Final Cut Studio on new Mac Pro

When I go to install Final Cut Studio on my new Mac Pro, it tells me that "Final Cut Studio Installer requires that your system have a Quartz Extreme capable video card."
I have the ATI 5870 and, just a wild guess here, I'm betting it does support Quartz Extreme.
A software update doesn't help me here because I cannot get the software installed the first place to be able to update it. What should I do?

FCS 1...Final Cut Pro 5.0? Won't work on an Intel. PowerPC only. You need at least 5.1...which wasn't a free upgrade, so updating won't work. You need FCP 5.1, FCP 6 or the most recent FCP 7. Those are the only versions that will work on the newer macs.
Shane

Trying to install Final Cut Studio on my Lion Notebook

Hey guys,
I bought a MacBook Pro with Lion on it but I can't seem to install Final Cut Studio 2 without Rosetta. I have the Final Cut Studio 3 upgrade discs which are universal but I cant install FCS3 without first installing FCS2. Anyone have any ideas?

> Will I run into any issues if I install Final Cut Studio 3 to run in conjunction with Final Cut X?<
That's been a running topic and I've found the posted discussions to be mutually exclusive. Maybe it depends on the hardware platform. Dunno. Might search the FCPX forum too.
Please post back if you figure it out with your own experiences.
bogiesan

DVD Studio Pro problem at Install Final Cut Studio

Hi,
I'm a new (not very knowledgeable user)trying to install Final Cut Studio.
My iMAC configuration is: 2.8 GHz Core2 extreme, , 2GB 667 DDR2 SDRAM, 1 TB Serial ATA drive, Super Drive 8X, plus a 1TB G-Raid.
I placed my final cut studio installation disc into the system and started the dialogue. Here's the result:
1) Final Cut PRO box (blue) checked Action= install
2) Color

Aborted queston answered later, Thank you

How can Install Final Cut Studio in my Mac Pro Early 2009 ??

I have Final Cut Studio 7 NOT installed yet and Mac Pro Early 2009 with OSX 10.9.5. I have Final Cut Pro X Version 10.1.4 installed. Can I installed Final Cut Studio here together with FCPX ?? Maybe not. What is the best way to install FCP Studio??
Do I need to make a partition? How? If so, what is the best OSX Version for FCP Studio ?? 10.6, 10.7, 10.8, 10.9 ??
Thanks for any help I can get
Alberto Marban

Here is the Best Practice Guidelines from Apple:
Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
MtD

Trying to install final cut studio 2 but disk unrecognisable

Hey,
I've recently had problems with compressor so I thought I would do a clean erase and install to reinstall compressor. Lo and behold I go to put my disk into my macbook's superdrive and installer refuses to kick in. It keeps seeing the disk as a blank disk and treats it as such. Would anyone know why this is so?
The disk doesnt have any scratches on it and is usually kept in its sleeve in the final cut studio box that shipped with it.

One possilbility is your optical drive. Try some other install disks from other software to see whether anyread issues surface. (I recently had to replace my drive that was displaying similar symptoms.) If you have a cleaning disk, you could also try that.
Good luck.
Russ

Trying to install Final Cut Studio/Pro that was on my old Mac Pro. Have old disks and upgrade but need to know the install sequence.

Similar Messages

Maybe you are looking for