Trying to install printer - get the message "You can't open the application "OSX installer" because PowerPC applications are no longer supported."
I am trying to install print controller and printer -but get this error message when trying to use the installer:
You can’t open the application “OSX installer” because PowerPC applications are no longer supported.
I also have a macbook pro running the same version OS and it installed fine there - I can't find the difference; but, NEED to print from my IMac.
Any help and/or suggestions would be greatly appreciated
Thanks!
I'm guessing you've tried Fiery's website for updated drivers? I wonder whether Lion drivers would work? Anything of use here:
http://fieryforums.efi.com/showthread.php/2824-OS-10.7-compatible-drivers-availa ble?s=c8afc71d2746a67970bb42d50538898c
Similar Messages
-
I am trying to install Final cut pro 5 studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported. My computer is New. Is their a link I can go to get tech support?
You won't find any help at tech support ... other than telling you the facts: Intel processor Macs require FCP 5.1 or higher. FCP 5.0 and earlier were written for PowerPC processor Macs, long before Apple switched to using Intel processors.
And then there's the issue of the OS. OS 7 will allow FCP 7 (and sometimes even FCP 6) to work OK, but versions earlier than that have spotty operation on Lion.
Here's a brief history of full FCP versions and recommended OS compatibility:
* = requires PPC ** = works with both PPC and Intel *** = require Intel
FCP 1.0* OS 9
FCP 2.0* OS 9
FCP 3.0* OS 9, OS 10.1, OS 10.2
FCP 4.0* OS 10.2, 10.3
FCP 4.5* OS 10.3
FCP 5.0* OS 10.3 (OS 10.4?)
FCP 5.1** OS 10.4, 10.5
FCP 6.0** OS 10.4, 10.5, 10.6 (OS 10.7?)
FCP 7.0*** OS 10.6, OS 10.7
FCP-X*** OS 10.6, OS 10.7
Essentially, you have a newer Intel processor Mac with a new OS and very old, incompatible software. You might be able to find a used version of Final Cut Studio 3 on sites like ebay or craigslist as it is no longer offered by Apple as an upgrade.
Alternatively, you could purchase and download FCP-X, but it is an entirely different application, sharing virtually nothing with previous versions of FCP.
-DH -
I'm trying to install CS2 on a mac OS X version 10.9.4. When I try to open the installer file I get a message "You can't open the application Adobe Installer because PowerPC applications are no longer supported. Does anyone know what I should do?
It means what it says - it's not compatible with modern Macs. You need to buy a current version.
Mylenium -
I get the message "You can't open the application iPhoto because it may be damaged or incomplete." This is a currently support iPhoto'11. Purchased and installed prior to OS X Lion upgrade. Was working, and now it is not. What might have happened? I saw that Apple updated iPhoto in the App Store, but that is not where I purchased this. I tried Software Update, but it said all the software was up to date.
Suggestions?GrandmaGG wrote:
I get the message "You can't open the application iPhoto because it may be damaged or incomplete." This is a currently support iPhoto'11. Purchased and installed prior to OS X Lion upgrade. Was working, and now it is not. What might have happened? I saw that Apple updated iPhoto in the App Store, but that is not where I purchased this. I tried Software Update, but it said all the software was up to date.
Suggestions?
Do you have iLife '11 Discs or did you download it from the App Store? -
I am running Lion (OS X 10.7.4) and trying to reinstall iLife06, a .mpkg file, using Installer.app. I get a message "You can't open the application iLife06.mpkg because PowerPC apps are no longer supported." Is there a work around?? Thanks in advance for any help that can be provided.
The only workaround would be to purchase the current version of iLife apps from the App Store.
Lion doesn't support the old PowerPC architecture anymore, which is what iLife '06 was written for.
If the internal apps are universal, right-click on the mpkg and choose Show Contents. Then, dig through and run the specific installer package for each application. -
when i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always. -
Time machine is not working under "Applications". I get this message: You can’t open the application “Time Machine” because it may be damaged or incomplete. What do I do?
Time machine under system preferences lets me setup time capsule. But backup fails because "Volume is in use" Help please!It does sound like you have a corrupted install.
The volume in use error is something we see all the time.
Look at C12 here. http://pondini.org/TM/Troubleshooting.html
But I suspect you have more serious issue.
I would run a disk verify on your local OS disk. A5 in the above reference has some info. -
New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?
I tested this:
Reinstalled Aperture 3.1 from the Trial Installer.
In some way it seems to be working. But the whole thing is a scary Chimera.
It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
But the Media Browser does not show the aperture Library that I created.
The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder. Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
When opening the chimera Aperture, I see plenty of warnings in the Console window:
An Aperture "Hang" report
xpcproxy assertion failed
com.apple.IconServiceAgent: main failed to composite image
quicklookd: Warning
and more ... the hang was critical. I had to force quit Aperture more than once.
So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your precious photos. -
As of today, I can no longer or Excel. I get this message: You can’t open the application “Microsoft Excel” because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted twice and that hasn't worked.
The application may be corrupt. Un-install and re-install Office.
Office 2011 Removal
Office 2011 Removal (2) -
Having installed Aperture, iPhoto won't open. When I try it fails with the message "You can't open the iPhoto.app because it may be damaged or incomplete. Any help please?
OK, fixed it. Found that iPhoto is now BACK in the App store.
Found iPhoto app in Finder and dragged it to Trash.
Downloaded iPhoto from App store and all now back working again.
Didnt expect to find iPhoto in App store as last time I looked it wasn't available.
Nige -
I recently upgraded from leopard to lion, now I can't open iPhoto get the message 'you can't open the application iPhoto because PowerPC applications are no longer supported'. I had no idea that this would happen - what can I do?
What version of iPhoto do you have?
Regards
TD -
I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....
Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds. -
I spent ages digging out the disc as it was installed on my old iMac and it clearly states that it does not require a Power PC.
I also tried upgrading to imovie 11 but all my old movies won't import.
I've heard from others in these forums that iMovie 6 is the only way to resolve this and people have described how they are running it on Lion.
So how can I get iMovie 6 to run?Office 2004 Applications Won't Work in Lion
You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)
You will find that the above applies to any PPC-only software including old iLife. You can purchase the new iLife versions on the App Store. -
tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"
any suggestions?This is what Canon suggested, still doesn't work.
Thank you for your E-mail inquiry regarding your PIXMA PRO-100.
Based on the information provided in your email, I recommend you download and install the driver for your PIXMA PRO-100 from the web site listed below.
http://www.usa.canon.com/cusa/support/professional/professional_printers/destop_ printers/pixma_pro_100#DriversAndSoftware
You will be required to download and install the following:
1. PRO-100 series Mini Master Setup (OS X 10.5/10.6/10.7/10.8) (under Drivers)
Should you require further assistance, please feel free to email us or visit our customer support website at http://www.canon.ca
still receiving Alert This software is not supported by your computer (powerPC-based Macintosh)
Also received error You can't open the application "Setup.app" because it is not supported on this architecture.
thanks for your reply A Brody. -
I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"
Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
1. Revert back to Snow Leopard.
2. Purchase FCP X...
if you can't stand FCP X
3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
I just got FCS 3 today through apple phone sales..
Maybe you are looking for
-
External Hard Drive Wouldn't Mount (iMac Late 2013)
Just wanted to drop a line here in case anyone else was having the same problem and perhaps to get an explanation from someone as to specifically why this is the case as it is disappointing/strange. In short: I got a Seagate Expansion desktop externa
-
22" Vizo 720p TV Display not connecting with 15" Macbook Pro
I'm trying to connect my Mid-2010 15" MBP running Mountain Lion to a 22" 720p TV. I have hooked my MBP with the same adapter to other monitors with success so I know the port and the adapter work fine. I have tried detecting displays, unpugging and r
-
Runtime calculations in PDF forms
Good day! My task is to make a PDF form of the quantity of the material on the factory with some runtime calculations. Just like these: MATNR | MAKTX | LGORT | LABST | MEINS 100 | Material_1 | 0001 | 100 | KG 100 | Material_1 | 0002 | 300 | KG
-
Cheap but good word processor for mac?
Hey just got a Macbook today and the saleswoman said i have a 30 day trial of iwork. But after it runs out i would have to pay 80$ to buy it. Are there any word processors out there that are good and cheap? Also doesn't Microsoft Word work on Macs so
-
How to use Any connect before login windows?
Dear All, Right now i have issue on Any connect VPN, all my clinet join Domain and i want connect any connect VPN before login windows. i mean that all user and password veryfy from DC. Is any connect VPN can do connect before windows loggin? Best Re