Trying to install service pack 2 for WLS 6.0
Hi !
I already have WLS installed and running under a Red Hat Linux release 6.2 (Zoot)Kernel
2.2.14-6.1.1smp on an i686
When I try to install the service pack 2 this happens:
===============================================================================
Choose BEA Home Directory
1- /home/bea/wlserver6.0
Existing BEA Home: 1
===============================================================================
WebLogic Server 6.0 not found
WebLogic Server Service Pack 2 Installation failed.
You do not seem to have WebLogic Server 6.0
installed for BEAHOME /home/bea/wlserver6.0.
What is happening?
Thanks in advance
Sergio Ríos
Daryl,
That is really strange...i just tried downloading from the same link and it is working fine for me.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
-Anil
Similar Messages
-
Trying to install Service Pack 1 from updates
I decided to restore my home computer to the Factory Setting Configurtion. Now when I try to install the Vista Service Pack 1,
it dose not install but it says it did install correctly after it was down loaded. My history says it installed 5 times now but
it has not. I am trying to update Internet Explorer 7 to 9 or higher but I can't get past installing Service Pack 1 which will
not install.I try installing service pack 2 which will not install becauce service pack 1 is not installed. This is a brand new
installation of Vista Home Pre. from Factory Settings Disk 2007. I have install all updates I can install. Then I also look at
Windows updates in my computer and it is not there, thow it shows in History Updates.Please Help MCSE Richard Sedore
Thank You.For Macs with built-in Optical drives, you will need to burn the ISO to Optical media and use the Optical drive.
-
Hi all,
Does any of you know which was the latest Service Pack for Weblogic Server 5.10? AFAIK, it was SP12, but I can't find information about it or if there was any other service pack for this oldie (I know I shouldn't be using it, but that's my customer's call)
Appreciate any help / pointers you might give me.
RegardsHi all,
Does any of you know which was the latest Service Pack for Weblogic Server 5.10? AFAIK, it was SP12, but I can't find information about it or if there was any other service pack for this oldie (I know I shouldn't be using it, but that's my customer's call)
Appreciate any help / pointers you might give me.
Regards -
Trying to instal Service Pack 2 under WLS 6.0
Below you can find my original message posted five days ago.
Just as comment: I don't have a beta version. It is <release level="6.0" Status="installed".
Any help?
Thanks
Sergio Ríos
PS: please don't erase !!!
Hi !
I already have WLS installed and running under a Red Hat Linux release 6.2 (Zoot)Kernel
2.2.14-6.1.1smp on an i686
When I try to install the service pack 2 this happens: ===============================================================================
Choose BEA Home Directory -------------------------
1- /home/bea/wlserver6.0
Existing BEA Home: 1
===============================================================================
WebLogic Server 6.0 not found -----------------------------
WebLogic Server Service Pack 2 Installation failed. You do not seem to have WebLogic
Server 6.0 installed for BEAHOME /home/bea/wlserver6.0.
What is happening?
Thanks in advance Sergio RíosHi.
You can get individual service packs by logging into your esupport
account at http://support.bea.com. Alternatively you can download
WLS6.0 with service pack 2 from
http://commerce.bea.com/downloads/weblogic_server.jsp.
Regards,
Michael
Alexandre Portella wrote:
Hi,
From where can I download the sp2 for WLS 6.0 on Solaris?--
Michael Young
Developer Relations Engineer
BEA Support -
Errors when trying to install Service Pack 3 for Exchange 2010
I have 2 Exchange 2010 servers that are running SP2 and I am trying to install SP3 on both.
They are installed in a DAG and so I am running the .\StartDAGserverMaintenance.ps1 script before attempting to install SP3. When attempting to run the SP3 setup I get the following errors:
Setup cannot continue with the upgrade because the 'powershell' (Machine: P-E10-2.company.com) process (ID: 5296) has open files. Close the process and restart Setup.
AND
Install hotfix Microsoft Knowledge Base article 2550886 from http://support.microsoft.com/kb/2550886 to improve Windows Failover Cluster transient communication instability when deploying stretched Database Availability Groups across datacenters.
I can download the hotfix and apply it but has anyone had any issues with this particular hotfix? Does anyone have any ideas about the powershell error?
thanks for your help.Hi,
That hotfix relates to a known issue implementing DAG's across data centres (an issue particularly with Windows failover clustering). As a best practice is should always be installed. Please review the following article, which describes why it should be
installed:
http://blogs.technet.com/b/exchange/archive/2011/11/20/recommended-windows-hotfix-for-database-availability-groups-running-windows-server-2008-r2.aspx
In regards to the open files, as the other poster suggested, there will be another user logged onto the server who has a powershell window open. Ensure all other users are logged off the server before performing the upgrade.
Best Regards -
T-500 running Windows Vista - Error trying to install Service Pack 2
I just spent my entire Saturday trying unsuccessfully to install SP2 for Windows Vista on my T-500. My laptop has Vista Home Premium as the OS and is fully patched with SP1.
The message I get is "Error_not_found (0x80070490)" when I try to install SP2
I ran SFC /Scannow and got a message that there are corrupt components and a direction to C:\Windows\Logs\CBS that has a huge file I cannot comprehend.
I also ran the "System Update Readiness Tool" prior to trying to install SP2 with no apparent effect.
I have tried various approaches to this such as running System Restore and reapplying everything with reboots in-between.
I confirmed no spyware and also disabled my antivirus program (NOD) during updates with no effect.
Has anyone else out there had a similar problem who might be able to offer advice?
Thanks,
The HoyAre you sure you have the proper file downloaded for your system? x86 if you are running 32bit Vista and x64 if 64bit.
Other than that, you might try to use Windows Update. Note that you need to install all updates, possibly including IE8 before Windows Update will offer you SP2.
You might also try installing all updates from Windows Update and then running your stand alone SP2 installer, to see if that solves the problem. -
Problem installing Service pack 1 for Windows Vista 32-bit from windows update
I have been trying to install Service Pack 1 for Windows Vista Home (32 bits) through Windows Update many times. The Update panel shows Windows Vista Service Pack 1 (KB936330) is available. I install the update, which by the way, just takes me few minutes curiouslly. The "update succesfully installed" message with the green circle checked on appears. But then, when I check my computer properties, the Service Pack 1 is not there and Windows Updated keeps showing again and again the update for Windows Vista Service Pack 1 (KB936330) is available and that needs to be installed. I don't know what else to do, can you help me please.
Hi:
Try downloading and installing the standalone SP1 file.
http://www.microsoft.com/en-us/download/details.aspx?id=30
If you get it to install that way, go straight to SP2 with the standalone download.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=16468
Paul -
Crystal Reports 2008 Error Installing Service Pack 1
Hello,
I am trying to install Service Pack 1 for Crystal Reports 2008 on Windows 2008 Server as an adminstrator and I get the following error message:
"The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a fold containing the installation package "CrystalReports.msi" in the box below."
Also, I have been unable to complete the registration wizard because I do not get a 10-digit registration number when I complete the registration process at www.sap.com/solutions/sap-crystal-solutions/productregistration . I don't know if this problem might be causing the Service Pack 1 to not install.
Thanks,
MicheleHi Michele,
Windows 2008 is not officially supported yet but it is for Vista and Windows 7 after SP 2.
To get it to work uninstall first, make sure you keep your keycode and then download SP 3 full build:
https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip
Then it should work.
Thank you
Don -
How come each service pack for WLS 6.0 requires a download of the whole applications
instead of a patch?To only get patch or service packs, you should login to websupport.
(http://www.bea.com/support/web.shtml)
Only entitled customers are eligible to receive service packs. Or else you have to
download the whole
bungle which 60 + SP's.
Anne wrote:
How come each service pack for WLS 6.0 requires a download of the whole applications
instead of a patch? -
Here I can find service pack for WebLogic 6.1, Win2K?
Thank you,
Jacob NikomJacob,
If you need just the service pack for WLS 6.1 , you will need to have a
websupport login and password. Please refer to this url for more
information on this.
http://contact.bea.com/bea/www/BEACustRegLogin.jsp
http://websupport.bea.com/custsupp/
Hope this helps
Raj Alagumalai
[email protected] wrote:
http://commerce.beasys.com/downloads/weblogic_server.jsp
"jacob nikom" <[email protected]> wrote in message
news:3bb8c8c7$[email protected]..
Here I can find service pack for WebLogic 6.1, Win2K?
Thank you,
Jacob Nikom -
Can't install service pack 1 for Windows 7 64bits - ERROR_IO_DEVICE(0x8007045d)
Hello
everyone.
I can
not install
Service Pack
1
for Windows
7 64-bit version
I've tried
the Windows
Update, tried all the solutions in Micrososft help
(installed
Preparation Tool
for
Windows System Update
7
for x64-based Systems, disabled
anti-virus,
rebooted,
tried
again ....)
and nothing.
At
the end always gives
the error:
Unable to
perform the request due
to
an error
of I / O
device -
Details - Error:
ERROR_IO_DEVICE
(0x8007045D).
Can anyone
help me?
Thank you.Hi,
Try to use Chkdsk tool to check if it could fix this issue:
1.
Type cmd in the Start Search box, right-click cmd.exe in the Programs list, and then click Run as administrator.
If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
2.
At a command prompt, type the following command, and then press ENTER:
Chkdsk /R X:
In this command, X: is a placeholder that represents the drive letter of the volume that you want to check.
3.
Press Y when you are prompted to check the disk the next time that the system restarts.
4.
Close all applications, and then restart.
Meanwhile, please try to download Windows 7 SP1 package and then install it to check if this issue persists.
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
Hope it helps.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the th
Thank you very much! It worked. -
Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
iTunes has been running great on this PC for years. What's up?
RonSee Troubleshooting issues with iTunes for Windows updates.
tt2 -
Service Pack for Proliant installing successfully but returning failure in OSD task sequence
Building bare metal servers with SCCM 2012 SP1 CU2 OSD and running into an issue with HPs where they attempt to install the Service Pack for Proliant 2013.02.0. I am using a package with a program. Here is the program command line:
Hpsum.exe /use_latest /allow_non_bundle_components /current_credential /silent
The application installs successfully but there is a distinct delay and then errors thrown that fails the TS. Setting 'continue on error' is a work around but not what I want to have in the production environment. How can I get around this issue?
This is the same exact package and program that ran perfectly fine in SCCM 2007, but we are seeing this as a new issue since the migration to SCCM 2012.
I'd like to solve this issue as well as get rid of the "Waiting for job status notification....InstallSoftware"
Any suggestions?
SMSTS.LOG
Invoking Execution Manager to install software InstallSoftware
12/3/2013 9:59:49 AM 1568 (0x0620)
Installing software for PackageID='WCD002D2' ProgramID='Silent install' AdvertID='WC120008' has started, jobID='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
InstallSoftware 12/3/2013 9:59:50 AM
1568 (0x0620)
Setting TSEnv variable 'SMSTSInstallSoftwareJobID_WCD002D2_WC120008_Silent install'='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
InstallSoftware 12/3/2013 9:59:50 AM
1568 (0x0620)
Waiting for installation job to complete.. InstallSoftware
12/3/2013 9:59:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:00:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:00:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:01:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:01:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:02:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:02:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:03:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:03:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:04:20 AM 1568 (0x0620)
Launching command shell. OSDSetupHook
12/3/2013 10:04:25 AM 2696 (0x0A88)
Windows station: WinSta0 OSDSetupHook
12/3/2013 10:04:25 AM 2696 (0x0A88)
Desk"Apple-tab-span" style="white-space:pre;"> OSDSetupHook
12/3/2013 10:04:25 AM 2696 (0x0A88)
executing command: C:\WINDOWS\system32\cmd.exe /k
OSDSetupHook 12/3/2013 10:04:25 AM
2696 (0x0A88)
executed command: C:\WINDOWS\system32\cmd.exe /k
OSDSetupHook 12/3/2013 10:04:25 AM
2696 (0x0A88)
Waiting for job status notification... InstallSoftware
12/3/2013 10:04:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:05:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:05:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:06:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:06:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:07:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:07:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:08:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:08:50 AM 1568 (0x0620)
CompleteExecution received InstallSoftware
12/3/2013 10:09:00 AM 3320 (0x0CF8)
CompleteExecution processed InstallSoftware
12/3/2013 10:09:00 AM 3320 (0x0CF8)
Received job completion notification from Execution Manager
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Installation completed with exit code 0x80070001
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Installation failed with error (0x80070001)
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Setting TSEnv variable 'SMSTSInstallSoftwareJobID_WCD002D2_WC120008_Silent install'=''
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
GetExecRequestMgrInterface successful InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
Releasing job request, jobID='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Releasing of Job Request successful InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
CompleteJob successful InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
Entering ReleaseSource() for D:\_SMSTaskSequence\Packages\WCD002D2
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
reference count 1 for the source D:\_SMSTaskSequence\Packages\WCD002D2 before releasing
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Released the resolved source D:\_SMSTaskSequence\Packages\WCD002D2
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
pInstall->Install(sPackageID, sProgramName), HRESULT=80070001 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,361)
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Install Software failed, hr=0x80070001 InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
Process completed with exit code 2147942401
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Failed to run the action: HP Server Pack for ProLiant 2013.02.
Incorrect function. (Error: 80070001; Source: Windows)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
MP server http://MP_server.company.com. Ports 80,443. CRL=false.
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Setting authenticator TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Set authenticator in transport TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Sending StatusMessage TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Setting message signatures. TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Setting the authenticator. TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
CLibSMSMessageWinHttpTransport::Send: URL: MP_server.company.com:80 CCM_POST /ccm_system/request
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Request was succesful. TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Set a global environment variable _SMSTSLastActionRetCode=-2147024895
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Set a global environment variable _SMSTSLastActionSucceeded=false
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Clear local default environment TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Let the parent group (System Management Install) decides whether to continue execution
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
The execution of the group (System Management Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Failed to run the last action: HP Server Pack for ProLiant 2013.02. Execution of task sequence failed.
Incorrect function. (Error: 80070001; Source: Windows)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)Hello Guys!
HP ProLiant Support Pack / Service Pack uses different Exit Codes, due to that this software support other operating systems than Windows. Therefore HP has standardized to use other Exit Codes, which Windows Detect as failures.
HPSum Exit Codes:
ExitCode 1 = "Installation Successful"
ExitCode 2 = "Installation Successful, but a reboot is required"
ExitCode 3 = "Installation was canceled, or no components were updated"
EcitCode 9009 = "Installation did not complete. Check the path and make sure that the Installation exists at the specified location"
HP recommends to use following Batch File to workaround this issue for SCCM:
=======================START_BatchFile=============================
:Init
@Echo Off
Cls
:Main
Echo HP Proliant Service Pack Setup
Echo Source : %~dp0
Echo ===============================================================================
Echo Installing the HP Proliant Service Pack Setup
Echo Command: "%~dp0hpsum.exe" /use_latest /target:%COMPUTERNAME% /force /Use_WMI /s
"%~dp0hpsum.exe" /use_latest /target:%COMPUTERNAME% /force /Use_WMI /s
:CheckForErrors
Echo HP Proliant Service Pack Stauts:
If "%errorlevel%"=="0" (
Echo *******************************************************************************
Echo INSTALLATION FAILED!
Echo *******************************************************************************
exit 1
If "%errorlevel%"=="1" (
Echo Installation Successful!
exit 0
If "%errorlevel%"=="2" (
Echo Installation Successful, but a reboot is required.
exit 3010
If "%errorlevel%"=="3" (
Echo Installation was canceled, or no components were updated
exit 0
If "%errorlevel%"=="9009" (
Echo Installation did not complete. Check the path and make sure that the
Echo Installation exists at the specified location:
Echo Path: %~dp0
Exit 1
:End
Echo An unknown status code was returned from the PSP.
Echo This status code is [%errorlevel%]. This will be treated as a success,
Echo but please check the installation to make sure it completedly properly!
Exit 0
=======================STOP_BatchFile=============================
God Luck!
Best Regards Anders Horgen -
Install service pack 2 in sharepoint medium form
Hi
i have a sharepoint medium form in production environment and i want to apply service pack 2
form has :
2 Application servers
2 Web front end servers
2 Index servers
1 Database server
Servers
Operating System
Configuration Database version
Services Running (check the attached file for details services running in all server)
1 Application Server
Windows server 2008 R2 Enterprise , Service pack 1
14.0.6029.1000
Central administration Service running in this server Only
For other services check the attached file
2<sup>nd</sup> Application Server
Windows server 2008 R2 Enterprise , Service pack 1
In two Web front end servers
Windows server 2008 R2 Enterprise , Service pack 1
Web applications deployed in these servers (these are load balanced servers)
Microsoft SharePoint Foundation Web Application running
Search service is running in these server
In two Index servers
Windows server 2008 R2 Enterprise , Service pack 1
Search service is running in these server
Database server
Windows server 2010 Data center
I want to take advise for from which server I will start install service pack 2
Or before applying service pack 2, Is I need to upgrade operating system if I update can I face any problems ?
adilLeaving function Command.this[string key]
03/27/2014 00:13:12 14 INF Leaving function Farm.TryIsJoinedToFarm
03/27/2014 00:13:12 14 INF Leaving function Farm.IsJoinedToFarm
03/27/2014 00:13:12 14 INF The parameter upgradesessionid is chosen, so returning the value as c81cccd6-5e02-4a35-b627-923fb6da03e9
03/27/2014 00:13:12 14 INF Entering function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:12 14 INF Setting the upgrade mode to inplace
03/27/2014 00:13:12 14 INF Leaving function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:12 14 INF Creating security token service application for this farm ...
03/27/2014 00:13:12 14 INF Successfully created security token service application
03/27/2014 00:13:12 14 INF Creating service connection point for this farm ...
03/27/2014 00:13:13 14 WRN Failed to add the service connection point for this farm
03/27/2014 00:13:13 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:13 14 INF Resource id to be retrieved is ServiceConnectionPointNotCreatedEventLog for language English (United States)
03/27/2014 00:13:13 14 INF Resource retrieved id ServiceConnectionPointNotCreatedEventLog is Unable to create a Service Connection
Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
03/27/2014 00:13:13 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:13 14 WRN Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container
exists in the current domain and that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=test,DC=com doesn't exist in the directory.
at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
03/27/2014 00:13:15 14 INF Entering function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:15 14 INF Spawing off the upgrade job
03/27/2014 00:13:15 14 INF Leaving function TaskCommon.TraceToPsconfigLogAndUpgradeManagerLog
03/27/2014 00:13:15 14 INF Trying to start the SPAdminV4 service
03/27/2014 00:13:15 14 INF Entering function ServiceHelper.TryToStartService
03/27/2014 00:13:15 14 INF Trying to start the SPAdminV4 service
03/27/2014 00:13:15 14 INF Entering function ServiceHelper.Start
03/27/2014 00:13:15 14 INF Trying to start service SPAdminV4 and waiting 180 sec to do so
03/27/2014 00:13:15 14 INF service SPAdminV4 is Stopped, will try to start it
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:19 1 INF Not running in high contrast, so we will paint the background with our trademarked image
03/27/2014 00:13:44 14 ERR An exception was encountered when trying to start service SPAdminV4
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Resource id to be retrieved is ExceptionInfo for language
English (United States)
03/27/2014 00:13:44 14 INF Resource retrieved id ExceptionInfo is An exception of type
{0} was thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 ERR An exception of type System.InvalidOperationException was thrown. Additional exception
information: Cannot start service SPAdminV4 on computer '.'.
System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.Start(String[] args)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
03/27/2014 00:13:44 14 INF Leaving function ServiceHelper.Start
03/27/2014 00:13:44 14 ERR Failed to start the SPAdminV4 service.
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Resource id to be retrieved is ExceptionInfo for language English (United
States)
03/27/2014 00:13:44 14 INF Resource retrieved id ExceptionInfo is An exception of type {0} was
thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 ERR An exception of type System.InvalidOperationException was thrown. Additional exception information:
Cannot start service SPAdminV4 on computer '.'.
System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.Start(String[] args)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.TryToStartService(String serviceName, Boolean autostart, Boolean throwOnFailure)
03/27/2014 00:13:44 14 ERR Task upgrade has failed with an unknown exception
03/27/2014 00:13:44 14 ERR Exception: System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception:
The service did not respond to the start or control request in a timely fashion
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.Start(String[] args)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.TryToStartService(String serviceName, Boolean autostart, Boolean throwOnFailure)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Resource id to be retrieved is ExceptionInfo for language English (United States)
03/27/2014 00:13:44 14 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
03/27/2014 00:13:44 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Resource id to be retrieved is ExceptionInfo for language English (United
States)
03/27/2014 00:13:44 14 INF Resource retrieved id ExceptionInfo is An exception of type {0} was
thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 ERR An exception of type System.InvalidOperationException was thrown. Additional exception information:
Cannot start service SPAdminV4 on computer '.'.
System.InvalidOperationException: Cannot start service SPAdminV4 on computer '.'. ---> System.ComponentModel.Win32Exception: The service did not respond to the start or control request in a timely fashion
--- End of inner exception stack trace ---
at System.ServiceProcess.ServiceController.Start(String[] args)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.Start(String serviceName)
at Microsoft.SharePoint.PostSetupConfiguration.ServiceHelper.TryToStartService(String serviceName, Boolean autostart, Boolean throwOnFailure)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF Entering function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Entering function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Resource id to be retrieved is ExceptionInfo for language English (United
States)
03/27/2014 00:13:44 14 INF Resource retrieved id ExceptionInfo is An exception of type {0} was
thrown. Additional exception information: {1}
03/27/2014 00:13:44 14 INF Leaving function StringResourceManager.GetResourceString
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionMessage
03/27/2014 00:13:44 14 INF Leaving function Common.BuildExceptionInformation
03/27/2014 00:13:44 14 INF Entering function get CommandCollec
adil -
Problem installing service pack 3 update
I have windows XP up and running on a seperate drive in my Mac Pro. I am now trying to update Windows by installing service pack 3 update via the Windows Update option in the control panel.
I get an error everytime saying there is not enough disk space. My hard drive have 109GB of free space so I don't know what the problem is.
Any ideas?jperkinski:
Here is a solution for you that should work:
Boot into Windows XP and get to the desktop.
Click on the START Button
Click on RUN
Type Regedit in the windows and click on OK
*Navigate to*
HKEYLOCALMACHINE\Software\Microsoft\Windows\CurrentVersion\Setup
HKEYLOCALMACHINE
\Software
\Microsoft
\Windows
\CurrentVersion
\Setup
In the right pane, Right-click and select New - String value
Name it as “BootDir” and set its value to “C:\”
Try installing SP3 now and it should work.
Axel F.
Maybe you are looking for
-
2.1.0.62: Problem with Package.Functions and Unit Tests
I like the new Sqldeveloper - I startet trying Unit Tests as described here: Link: [http://www.oracle.com/technology/obe/11gr2_db_prod/appdev/sqldev/sqldev_unit_test/sqldev_unit_test.htm#t4] It worked with a test-procedure. Now i am trying to test my
-
Wireless and guest network and HREAP
Hi, I have inherited a wireless infrastructure which comprises of a head office with WCS and WLC plus LWAPP access points. There is a sub office in another town who wishes to deploy a wireless infrastrucure and it struck me that as they only want to
-
I am getting really ******, been working on this for a couple of hours and appletv tells me to turn on the homesharing on the computers i want to share with. Never recognizing them. Apple is on the network thru ethernet, antd the others through wifi.
-
Change the default entity in the lookup window in PhoneCall Form
Hello, I'm trying to write a javascript to change the default entity in the lookup window for the 'from' field to use the Contact entity. Right now Account is the default entity. So this is what I have: document.getElementById("from").setAttribute("d
-
Run Web Layout Error 11g R2 Report
Report Builder 11.1.2.0.0 When button pressed on Run Web Layout in Oracle Report Builder then It's show Error:- java.lang.NoClassDefFoundError: javax/servlet/tagext/tagLibraryInfo Installed proucts are:- Weblogic Server 10.3.6 SE JDK 6U35 64bit Oracl