Trying to make a dvd from a project and this error message appears .The project could not be prepared for publishing because an error occurred. (-2125)
Trying to make a dvd from a project and this error message appears .The project could not be prepared for publishing because an error occurred. (-2125)
Hi
Error -2125
OK Error code - 2125 usually indicates that the movie is to large.
It use to pop up when going to iDVD !
iDVD - DO NOT CARE ABOUT Gbs at all. I got movies on 500Mb that do not fit and 50Gb that fits nicely.
iDVD - ONLY CARES ABOUT - Duration. Duration is Movie time + MENU TIME. Choice of
menu and animation of this can take lost of "DURATION" 15 minutes or even more.
Choice of encoding method and use of SL or DL DVDs determine the DVD limit.
iDVD 08 & 09 & 11 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies + menus up to 120 min.) - BEST
• Best Performances (movies + menus less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
DL DVDs can store about double of these times.
ALTERNATIVE - The Error Code can indicate that free space on Start-up (BOOT) hard disk is
less than 25Gb (my minimum)
calbe - wrote
If you are getting OSStatus error -2125, I've seen this caused by the computer display sleep settings.
Try changing the sleep settings to never and see if you are able to export.
Yours Bengt W
Similar Messages
-
I've been trying to burn my projects in imovie to dvd's and i keep getting the forllowing error message "UNABLE TO PRPARE PROJECT FOR PUBLISHING"
"The Project could not be prepared for publishing because an error occured (Error in user parameter list)
Does anyone know why this is happening and what I can do to fix it?
Thanks!!Can you give more details? What exactly is the entire error message text? there should be an error number too. Are you trying to finalize this to an external disk?
-
Whenever i try sharing my imovie trailer with idvd it says "The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". How am i supposed to burn it to a dvd then?
Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80 -
I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"
Check out this thread: https://discussions.apple.com/thread/1421870
It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work. -
I keep getting this message from Imovie:
Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)Bartirn,
I called Apple under my Mac support contract. They were completely unfamiliar with the error you and I were encountering. Updating to 10.8.5 didn't help.
I'm stopping my TimeCapsule while I perform these tasks, but I don't know yet if I have a consistent work-around.
B -
The project could not be prepared for publishing because an error occurred. (-50)
Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W -
I HAVE COMPLETED SEVERAL IMOVIES AND FINALIZED JUST FINE. NOW I GET THE FOLLOWING MESSAGE FROM MY LATEST PROJECT. "The project could not be prepared for publishing because an error occurred. (File already open with write permission)"! What is going on?
Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
Easiest way to find out if this is the problem is by:
• Create a new User-Account
• Log out of Your old one and into this
• Re-try iMovie
If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occurs only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W -
when trying to share my movie on Imovie i get the following error. "The project could not be prepared for publishing because an error occurred. (-108)"
any idea why this has happened? How do i rectify this?Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
• Free Space on Start-Up hard disk. How much ? (other disks do not count)
Yours Bengt W -
this error occurs. Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured. (Project is too Long)
I know this isn't true, as it is only 1:39:31. I have a mac with 160mb and 160 gb available. Could this be the problem? If so how can I remove some things to make room? Thanks!!By exporting to the right format a movie of an hour and forty minutes could potentially use up 160 GB, exactly what format are you exporting to. additionally I'm not clear what you mean when you say your mac has 160 MB and 160 GB available.
-
When I try to export the movie I get this error code. Im doing a music video and have put days into it and now I can not get it to export! My other small project export with no problem.
Thanks for the details. We have a similar problem (see my post below) and are in the process of adding back each clip and then testing for export. My question is, once iMovie is unable to export the project, does it render the file "bad" and prevent exporting even if you remove the "poisned" clip(s)?
++++++++++++++++++++++++++++++++++++++++++++++++
Hello, We are having a similar problem running iMovie '09. We get the exact same error as you reported.
"Unable to prepare project for publishing" The project could not be prepared for publishing because an error occurred (-50)
We have a very similar situation were we have multiple repeated clips. However, our clips are 2.4 's. Like you, we took the finished project and started eliminating edits that we thought might be preventing it from exporting. The following actions still would not allow the project to export:
removing title pages
removing transitions
removing imported music from iTunes
removed another clip from another event
closed all other programs
closed iMovie, powered off computer, opened iMovie, tried to export
reconfirmed the last project exported would still export - it did without issueThe only difference between the project that will export and the one that does not are these short (2.4's) repeating clips
When we create the new project from the recorded event without making any edits (just as recorded), it exports without issue. We have started the arduous task of adding back in each edit and testing it for export until we determine which edit is causing it to "not export". This is a very inefficient way of troubleshooting.
This is a science project for my son and we need to be able to save it as a QT or mpeg4 movie so that he can submit it to his teacher for viewing and a grade!
Any ideas from any other users would be greatly appreciated. -
When I click on finalize project or when I tried to share on Vimeo iMovie goes through this ten hour operation and the, somethime while I'm away from the computer, I get this error message. UNABLE TO PREPARE PROJECT FOR PUBLISHING. The project could not be prepared for publishing because an error occurred. (File already open with with write permission).
This has happened to me before and I can't nail down the particulars of when this happens. I will say I've never been able to Finalize A Project (not even sure what than means) but I have been able to publish short films to YouTube. This current film is a little over an hour and I picked the HD Format. Could the size have something to do with it?See the discussion here:
https://discussions.apple.com/message/16784714#16784714 -
The project could not be prepared for publishing because an error occurred. (-50)
I made an 18 minute video, tried to export it using iMovie '11 to iTunes/Media Browser/iDVD everything. Everytime I get this message 'Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (-50)'. I tried the time machine snapshot thing, I set all teh acces to Read/Write and restarted my computer. I have over 70GB on my computer, which is more than enough for a 540 MB film. What does the -50 mean, and how do I solve it. Thank-you.
PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!! -
Imovie error The project could not be prepared for publishing because an error occurred. (-50)
I can't export my imovie project.
Appears this message:
"The project could not be prepared for publishing because an error occurred. (-50)"
What can I do?Thanks for the details. We have a similar problem (see my post below) and are in the process of adding back each clip and then testing for export. My question is, once iMovie is unable to export the project, does it render the file "bad" and prevent exporting even if you remove the "poisned" clip(s)?
++++++++++++++++++++++++++++++++++++++++++++++++
Hello, We are having a similar problem running iMovie '09. We get the exact same error as you reported.
"Unable to prepare project for publishing" The project could not be prepared for publishing because an error occurred (-50)
We have a very similar situation were we have multiple repeated clips. However, our clips are 2.4 's. Like you, we took the finished project and started eliminating edits that we thought might be preventing it from exporting. The following actions still would not allow the project to export:
removing title pages
removing transitions
removing imported music from iTunes
removed another clip from another event
closed all other programs
closed iMovie, powered off computer, opened iMovie, tried to export
reconfirmed the last project exported would still export - it did without issueThe only difference between the project that will export and the one that does not are these short (2.4's) repeating clips
When we create the new project from the recorded event without making any edits (just as recorded), it exports without issue. We have started the arduous task of adding back in each edit and testing it for export until we determine which edit is causing it to "not export". This is a very inefficient way of troubleshooting.
This is a science project for my son and we need to be able to save it as a QT or mpeg4 movie so that he can submit it to his teacher for viewing and a grade!
Any ideas from any other users would be greatly appreciated. -
When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
Option File - Finalize Project gives inmediately the same errormessage.
Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
Please advise, thank you!Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80 -
The project could not be prepared for publishing because an error occurred.
I have just loaded iLife 09 on my MAC. I've edited a movie and now want to export it, put it in iTunes, whatever I can do to move it beyond my laptop. No matter what option I choose under Share I get the same error message, "The project could not be prepared for publishing because an error occurred. (-2009)". I can find the error message online, but not the (-2009) error code. I'm also a longtime PC person who has just switched to a MAC. Can anyone help?
I also am having the exact same problem. iMovie '09. I have tried changing permissions on all sharing folders, exporting to desktop, sharing to iTunes in all size files - and yet still get "Unable to prepare project for publishing. error (-2009).
Mac OSX version 10.6.2 Snow Leopard
Maybe you are looking for
-
How do I change my Itunes account to a new one
How do I change my itunes account to a new id account
-
I keep getting the following error message when trying to execute a custom package: Error starting at line 1 in command: call xxnwu_bud_vacant_pkg.GET_POSITIONS ('31-JUL-2009', 3001) Error report: SQL Error: ORA-04063: package body "APPS.XXNWU_BUD_VA
-
Ok, What is all this "other" taking up space on my iphone and how do I get rid of it? It's taking up almost half the space on my phone.
-
Faxing PDF files made from cfdocument
We recently upgraded to mx and we instituted the cfdocument tag to create our pdf files that we send as faxes or email attachments. Our faxes are not being printed correctly if they are sent to a standard fax machine. However the pdf file looks fine
-
Hard Drive formatted to read-only
I was trying to install XP Pro via bootcamp, and didn't realize that the disc had been switched w/a non-SP2 copy. When it was done, it tried to start installing again, and then I realized what had happened, so I took it out and tried to put Vista on