Trying to restore from time capsule to nes hard drive, keeps looking for disks ! Can you help

ccan't restore from time capsule to new hard drive, after changing to new HD, after calculating required space to restore it keeps looking for disks! Have have put original OS X  install disk 1 in it won't Eject , any help

The very best way to do this is with ethernet to the existing router. Put the TC in bridge mode manually.
Then plug it in to existing router.. we recommend LAN router to WAN on the TC but even that is not 100% necessary.
If you want to link by wireless, to a non-apple router that is bad.. recommend strongly against it. Join a wireless network is super slow.
If you have a desktop Mac you can plug it directly into the Mac by ethernet.
But we need to know how the Mac is connected to internet.
I have given some info on one layout here.
https://discussions.apple.com/thread/4817218?tstart=30
If you end up relying on an old TC. And any of the models from Gen1-3.. and increasingly Gen4 have all reached EOL.. they can die suddenly and either take your files with them or be hard to recover. Also a TC is slow cf a USB external drive even, which is more reliable. Considering a 2TB is <$100 I would be careful using an old TC simply because you got it free.

Similar Messages

  • How to restore from Time Capsule to bare hard drive

    This is more for information, than a question, but I really hope that it helps someone else out facing the same challenge.
    Scenario:
    1 complete recent backup on Time Capsule
    2 failed hard drive on Mac
    3 no startup or OS disk
    [My teenage daughter was distraught, as her much loved and much abused MacBook Pro died completely on a college tour; quick diagnosis confirmed that the hard drive was completely toast. And with it, she believed, all of her work this summer on her college applications.
    That was the bad news. Now for the good news. Unbeknownst to her, I had configured her machine to automatically backup to the Time Capsule on the home network.
    Now the problem. We just moved home. No OS disks. No install disks. And I discovered that she hadn't told me that the optical disk drive was also toast. So no way to get a disk in, in any case.
    So I have a backup, and a new hard drive to go into the dead Mac, and (fortunately) a good Mac (actually several). But all of the guides assume that you have some way to get the zombie Mac to boot.]
    Solution:
    1 figure out spec for new hard drive, find one, buy it and install new hard drive in dead Mac (making it a zombie Mac - it moves but it has no real brains) http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf and http://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Mid+2010+Hard+Drive+Repl acement/4305/1
    2 mount hard drive as FireWire disk in Target mode by using ⌘T to any good Mac
    3 download Carbon Copy Cloner http://www.bombich.com/
    4 start the process of cloning, which involves creating a (hidden) Recovery HD partition http://help.bombich.com/kb/advanced-strategies/the-disk-center#recovery_hd
    5 do NOT proceed to clone the 'good Mac', ejecting the formerly dead Mac, which was a zombie Mac, and now has a brain again, and shut it down
    6 connect the now undead Mac to the Time Capsule
    7 boot the now undead Mac, and restore as usual from the Time Capsule http://pondini.org/TM/14.html
    [... and thereby obtain many many good father points]

    Read Q14-18 in Pondini.. the grand poohbah of Time Machine.
    http://pondini.org/TM/FAQ.html

  • After trying to restore from time capsule, I get the following message when I try to access the folder "data." The folder "Data" can't be opened because you don't have permission to see its contents.  Any ideas?

    after trying to restore from time capsule, I get the following message when I try to access the folder "data": "The folder “Data” can’t be opened because you don’t have permission to see its contents."  Any ideas?

    Are you restoring from a TM backup??
    Check the methods Pondini outlines to do restore.
    Q14-17
    http://pondini.org/TM/FAQ.html

  • HT201250 How to restore laptop from time capsule after replacing hard drive

    How do I reload all my programs and files from a time capsule after changing hard drive?  Also Apple store reloaded with Snow Leopard and not Lion.  Will that be a problem?  Thank you

    Plug the external drive into a computer by usb or whatever box you have available..
    When you say blank, is it correctly formatted.. we recommend HFS+ which is Mac OS Extended (jorrnaled)
    Make sure you use GUID type disk setup not MBR if it came from PC world.
    Copy the files via finder from TC to the external drive.

  • After a restore from time capsule the app iCal is not restart. How can I install iCal manually for Lion?

    Dear comunity coukd you help?
    After a logic board failure and the repair by Apple I tryed to restore my MacBook Pro from my Time Capsule.
    It worked at least, but for some reasons I don't understand the App iCal was not restored and is missing now.
    I searched for a manual way to install the app but did not find a file to install iCal.
    What may I do?
    Thanks for your help and support!
    Christian

    Just to confirm, does your Firefox hide the .js extension on previous.js and the various upgrade files? In that case, you would be looking for a file named recovery with a type of JScript to rename to recovery.old, and similarly with any sessionstore file of type JScript.
    Or maybe it's easiest to turn off the Windows feature of hiding certain file extensions. This article has the steps: http://windows.microsoft.com/en-us/windows/show-hide-file-name-extensions

  • After restoring from Time Machine to new Hard drive, system will not boot

    I replaced my hard drive on my Macbook (2008 model) with a larger drive. I then put in my Snow Leopard disk, and followed the steps to restore from Time Machine backup. a few hours later it said it was restored, but when trying to boot up, I just get a blue screen with an occasional flicker to the Leopard screen. I tried an earlier back up as well but with the same results. Any suggestions??

    Same exact problem here just yesterday, folks.
    Got a bigger hard drive on my MacBook Pro (15-inch Core 2 Duo) and installed it. Followed the restore procedures from Gizmodo (http://gizmodo.com/333319/the-secret-of-the-time-machine+assisted-hard-drive-swa p). Then got the blue screen immediately after the chimes.
    I only managed to transfer my old disk content by using CarbonCopyCloner.
    Having said that, your solution looks uselful, Portland Mac! :
    Portland Mac wrote:
    ... But when I decided to try and just do a fresh install and work my way back through all my software, I started by installing Snow Leopard and suddenly it boots and everything from my Time Machine backup is there...
    But I would not say the following:
    Portland Mac wrote:
    ... On a new drive apparently you have to install Snow Leopard before you do a time machine restore.
    Am I mistaken, or did you do a fresh install after restoring your TimeMachine backup?
    In any case, I found an interesting Apple article that might confirm that there is a problem: [Mac OS X v10.6: Issues after restoring a Mac from a Time Machine backup made with a different Mac ("Restore System From Backup…")|http://support.apple.com/kb/TS3243]. Or is it a completely different thing?
    And another discussion that might give some good advice: [http://discussions.apple.com/message.jspa?messageID=12578529#12578529]. Personally, I will now do as the man says: two backups, on two different external hard drives, using different apps, the other one being CarbonCopyCloner...
    For info, and I don't know whether that matters, my backup disk had been full and some past content had been erased automatically by Time Machine. But I don't think this should have mattered...

  • Toasted my installation. Restoring from Time machine to 2 hard drives?

    I just installed a second hard drive into my macbook pro. SSD is the system drive and HDD is the data drive.
    When it was still working, I had my home folder on the SSD and my iTunes and Photo libraries on the HDD. Things were good.
    Then I decided to move the entire home folder to the HDD.
    Sys Prefs -> Users -> right-click the user -> advanced -> "move the home folder"
    and again, everything was good.
    Then I read something about having the user Library folder on the SSD is a good thing.
    So I moved the home folder back to the SSD. Rebooted and all my prefs were now gone. Figured I messed up something and didn't want to troubleshoot.
    So time for a restore.
    Attempt 1
    - Open Time Machine, select both hard drives, selected a past date and hit restore.
    - Got a message that I didn't have enough space.
    * I figure this is because time machine restores the entire contents of each drive as entire new volumes as a first step.
    Attempt 2
    - Go into recovery mode COMMAND+R
    - Discovered I don't have a recovery partition
    * I guess this is because I cloned my original system drive to the SSD using CCC and it didn't move this part.
    Attempt 3
    - I created a LION USB Install Key
    - Booted from it, and selected 'Reinstall Lion' (because I read an article that I could recover my files after Lion had finished installing)
    * Discovered that it reinstalled 10.7.0 and I would have to apply all patches on top. It didn't restore my HDD either.
    * Later found out this method only restores the main system drive.
    Attempt 4
    - Now that I have a recovery partition, I booted from it.
    - I selected "Restore from Time Machine Backup"
    - Was able to select my Time Capsule, and it gave me choices on which date I would like to restore to.
    - I selected and hit restore.
    * It's about 25% done now. And I realize that i should've done this in the first place.
    Question: Will this method restore both of my hard drives?

    hsmp wrote:
    Question: Will this method restore both of my hard drives?
    No, only a single OSX drive.  If both were backed-up, and both contained OSX, there was a (not very obvious) option to select which one you wanted.
    See Time Machine - Frequently Asked Question #14.  Section (g) shows this.
    If you want to restore the "other" drive, and it contains OSX, run the restore again and select it.
    If the other drive doesn't contain OSX, use the "Star Wars" display to restore it, per FAQ #15.

  • Use Time Capsule as a Hard Drive via Ethernet for Time Machine

    Hi Folks
    To summarise a very very long story here goes;
    - About 12 months ago my father in law buys a Time Capsule without really knowing what it is for and how it works (I know don't ask!!!!!)
    - I set it up for him connected to his wireless router so he uses his router to access the internet and uses the Time Capsule to back up his iMac via wireless with Time Machine. (from what I can see he could have saved himself some cash and just bought an external Hard Drive and connect it via USB to the iMac for Time Machine, but never mind. He has 1 iMac and no other Mac's in the household. His printer is connected to his iMac via USB in the same room and he uses a wireless router to access the internet, since the phone point is in another room)
    - All is well until Monday when he tells me he cannot access the internet. After much much trial and error I have eventually managed to get his internet back up and running, but he has somehow managed to erase his Time Capsule.
    - I set his Time Capsule back up as it was previously and it starts performing the initial backup again. However at the rate its taking I think it will take well in excess of 24hrs to do that initial
    backup. Also so far It has failed 3 times during this initial backup and I get an error message stating it's failed. The setup guide makes reference to performing the initial backup via ethernet as it's quicker.
    I'm thinking the best way forward would be to just plug the Time Capsule into the iMac via ethernet and use it purely as a Hard Drive for use with Time Machine. I've tried just plugging in the ethernet cable from the Time Capsule to the iMac, but it doesn't recognise it. Bear in mind that it currently works via wireless, do I need to perform some sort of factory reset or how do I go about telling the the iMac to no longer use the Time Capsule wireless, but just connect via ethernet instead.
    Of course I could just forget about the Time Capsule all together and tell him to get a 500gb USB External Hard Drive, plug that in and set up Time Machine with that instead.
    Am I missing the point here and can the Time Capsule do a lot more for him, given his current setup.
    Thanks

    That is true but if you mix your files with the Time Machine backups, Time Machine will have trouble contril disk space when it gets low.
    If you are going to do that it is recommended that you partition the drive. Since Time Capsule is not able to partition the drive that means you will have to remove it in order to partition it.
    A simple solution IMO is to get another external drive and hang it on the USB bus in the Time Capasule.
    Allan

  • Trying to use my Time Capsule as a Hard Drive.. Help!!

    I have recenly inherited an old Time Capsule from a family member and I've been trying to figure out for two hours how to use it as an external hard drive. I connected it and added it to my existing network as an extention. Then, I turned off its wireless capability, and hit update. After about 5 minutes all it said was that "An error occurred while updating the configuration." Ive done this process over and over. And Ive reset it to factory settings multiple times already. All I need is an easy way to increase my computers storage using this Time Capsule, even if it means using an ethernet cable.

    The very best way to do this is with ethernet to the existing router. Put the TC in bridge mode manually.
    Then plug it in to existing router.. we recommend LAN router to WAN on the TC but even that is not 100% necessary.
    If you want to link by wireless, to a non-apple router that is bad.. recommend strongly against it. Join a wireless network is super slow.
    If you have a desktop Mac you can plug it directly into the Mac by ethernet.
    But we need to know how the Mac is connected to internet.
    I have given some info on one layout here.
    https://discussions.apple.com/thread/4817218?tstart=30
    If you end up relying on an old TC. And any of the models from Gen1-3.. and increasingly Gen4 have all reached EOL.. they can die suddenly and either take your files with them or be hard to recover. Also a TC is slow cf a USB external drive even, which is more reliable. Considering a 2TB is <$100 I would be careful using an old TC simply because you got it free.

  • Restoring from Time Machine after 1T hard drive replacement

    I am a super computer novice. I picked up my computer yesterday after having the recalled Seagate hard drive replaced. I backed up my computer using Time Machine before I took it in on a Seagate "Backup Plus" portable hard drive.
    Now, when I have tried to use the restore start up, the computer recognizes that my drive is connected, but says there are no files on that drive it can use to restore the system.
    I can see that there are 50GB on the disk, and when I look in it, there are files called "Macintosh HD" so that makes me think that my stuff is in fact on my external drive. why can't my computer see it?
    Do I need to get a FireWire cord to connect to my computer?  I'm using the USB 3.0 that came with the hard drive.
    My computer had Mountain Lion when I backed it up. I think it is back to whatever OS it came with originally. Do I need to update to Mountain Lion?  If I do, how do I do so without having to pay for it again?  My app store is empty since my computer was wiped.
    Thanks for the help, I really need it!

    The first thing to do is upgrade back to ML, which you can easily do.  Just redownload ML from the app store with the same AppleID you used the previous time you purchased the ML upgrade.  Your purchase is tied to the AppleID you used when buying, so you can download it again (as many times as you wish) without payment as long as you use the same AppleID.
    Once you have upgrade it to ML, then try the restore from the backup (which I gather was made when while running ML before).

  • Restore from time machine on clean hard drive

    I want to change my current hard drive to a SSD hard drive. Unfortunately i lost the DVD that came with the Mac, so my question is whether i can do a complete restore from the time machine backup? Does it include all the iOs file and everything?

    You will need the Install DVD that shipped with your Mac...
    Contact AppleCare and for a small Handling fee they will send you the Appropriate disc.
    Contacting Apple World Wide for Support and Service
    http://support.apple.com/kb/HE57
    Apple Contact USA
    http://www.apple.com/contact/

  • After full restore from Time machine, my TM hard drive won;t mount

    I got my macbook pro back from a logic board repair and restored it fully from Time Machine using my leopard install disc.
    Took a while, but it has installed OK. But some applications weren't restored and now the Time Machine drive won't mount on the Macbook at all. When I open up time machine - and try to choose a backup disc nothing comes up.
    The drive shows up on a PC when i connect it (but won;t read it as its mac formatted) so I'm pretty sure there;s nothing wrong with the drive.

    Also, be aware that TM thinks you got a new Mac, not a new logic board. Thus you won't see your TM backups in the normal way. You'll need the (badly named) +*Browse Other Time Machine Disks+* option (see #E2 in the Time Machine - Troubleshooting *User Tip* at the top of this forum).
    In addition, when you start doing new backups, TM will start a whole new "sequence," as if it were a different Mac. See #C8 in the Troubleshooting Tip for options.

  • Is it possible to use my time capsule built in hard drive as a airport disk for my home network instead of just a back up with time machine?

    I am setting up a new wireless office system for at my job. We have 5 employees and are looking for a wireless hard drive system for us to dump files on and pull files from. We plan to use dropbox for things we are currently using/modifying but would like a wireless hard drive to store our older and completed information/projects on so we can still access them if necessary without using up all of our dropbox space. I'm looking at either getting the new airport extreme and just hooking up a lard external hard drive to it or getting the new time capsule.
    I am wondering if it is possible to use the built in hard drive on the time capsule as a wireless hard drive for collaborating/accessing instead of just as a time machine back up? If so then it seems to make sense to buy the TC w/ 3tb hard drive instead of buying the extreme and a larger external drive.

    Yes, it is. Note that both the original and backup copies of a file shouldn’t be on the same drive, as it may fail at any time.
    (111643)

  • Restore from Time Capsule after Hard Drive Crash

    The HD on my iMac crashed Christmas Day. I have been running backups on Time Machine to a Time Capsule since I purchased the iMac (and also backing up a MacBook Air), but never had any occasion to see if it worked.
    I yesterday got the computer back with a new HD installed. When I tried to do the restore from Time Capsule from the Setup Assistant which ran on start up, I could not get past the initial screen. It kept hanging up on "Opening Time Capsule," and then on one occasion it found only the MacBook Air back up volume.
    After some research here, I tried running the utility after booting from my Snow Leopard disk. This time, it immediately found the backups from both computers, but hung up on opening the iMac backup.
    After more research, I ran the disk utility and repaired the HD on the iMac. It finally worked -- I woke up to a "Restore Complete" message (it started around 10:00 pm last night). The iMac started up without a hitch to the way it looked Christmas morning. The only problem I have noticed is that my most recent events in iPhoto are empty. The thumbnails are there, but no pictures. I tried to rebuild the library using iPhoto Library Manager, but no luck. Any ideas?
    The other thing I noticed is that I had to reauthorize the computer for my iTunes purchases. Will Apple fix that so it doesn't chew up my last remaining authorization?

    think about the speed of wifi here
    speed at 802.11n = a theoretical 540Mbps (less in real world scenarios)
    Mbps = Mega bits per second
    MBps - Mega bytes per second
    8 bits = 1 byte
    8 mega bits = 1 mega byte
    How long would it take you to download a 1 gig file from the internet wired into your modem? About 10-20 min? And that is taking into account that the info is being uploaded hardwire. Now imagine that same file over wireless in your home being upload by the Airport card in your computer. People over look upload speed when considering these things. The wireless upload speed of your Airport card is what is limiting this. Just a limitation of the technology, not a fault of Apple just stating the numbers here.

  • Trying to restore from Time Machine - HELP please

    I tried to restore from time machine this morning...and am getting this error :good morning, "an error occurered (2) while copying, there is no such file or directory"
    any idea?????
    TIA

    lol, it didn't say goodmorning.
    Last night my mac froze, i had to turn it off buy the button on the back...i tried to turn it on, it just hangs at the gray screen with the apple on it and the little circle things goes around and around and around. I put in my leopard OS disk and went to utilities to do a disk scan repair, it said no valid packages found...i dont know what to do with that...Ithought i could do a simple restore from my time machine...what you saw above is the error i got...
    I don't know what to do or how to get my machine back to normal.
    Can you help me?

Maybe you are looking for

  • IR - if count (primary key) cannot change to count different column

    Apex 4.1.1.00.23 Windows 7 IE8 / Firefox 16 If I add a Group By and Count to an Interactive report and choose the primary key column as the one to Count, run the report and then edit the Group By to count a different column, the result set does not c

  • How can i transfer music from my iPad to my mac

    So my ipad is full and I'm trying to make some space to download some movies. I'd like to download the music I have from my Ipad to my mac since most of my music is on my ipad vs my mac. Most of my music wad not purchased on itunes so i can not sync

  • REASONS FOR REJECTION - SALES ORDER

    I would like to know if is it possible to change a reason for rejection that had already exist and it is not selected the item 'Not relevant for Billing'. I would like to select this item, this change influence on all sales orders that have already u

  • Cancelling a BT Contract due to government Pension...

    I am a 72 year old Disabled Pensioner and due to the Governments pension cuts, I now cannot afford to keep up my payments to BT, in addition they (BT) want me to pay them £200.00p to cancel the remaining period of 14 Months of a two year contract.  H

  • Disable apex_item.text

    Hello, I have the following problem: I need a tabular form with one text-box-column, where the user can type in something. The problem is, that the column should be disabled if the value of the maximum-column = 0. I know that it should be something l