Trying to restore Snow Leopard PHP to original OS X 10.6.6 configuration

Several Version of OS X ago, I used Entropy PHP Package because the Apple supplied version did not offer some graphics handlers I needed.
Now, I'm up to OS X v. 10.6.6, and my entropy PHP no longer works. So I installed what appeared to be the latest release. Apparently it wasn't and Entropy doesn't have a package for 10.6.6. But it did mess up the stock PHP configuration on my machine.
Now,I understand from some research, that the OS X 10.6.6 version of PHP includes the graphics capabilities I want. The problem is restoring my system to the stock software since Entrophy has apparently messed it up.
Can I reinstall Snow Leopard 10.6.3 from my original discs and then do the software upgrades to get back to 10.6.6 so I'll have a stock version of PHP ?
Preferably without losing existing data files.
Thanks,
Robert

After you click Download, it should prompt you for your Apple ID and password - remember you must use the same one used to purchase it - and the download should commence. If that is not happening I have no explanation.
Perhaps it is already downloaded and waiting for you to install it?

Similar Messages

  • Trying to restore Snow Leopard from TM

    I installed Lion on Aug 27th and had several crashes in Mail and have been unable to find a solution. So I have
    renstalled SL which went well but now would like to go back to before Aug 27 in TM to reload all apps and data.
    With the present SL and entering TM I can see that Aug 26 is there and would like to bring that into my Mac.
    Is this possible?
    I have inserted my SL disc loading the installer and at that point used the Utilities pull down to select restore from
    Time Machine. Continued on to the screen where I should see my TM but do not.
    I also thought I could just select the Macintosh HD and then enter TM at the date I want and do a restore there but that just grinds forever.
    Could someone help in restoring SL please. I even tried to connect directly to the TM via its ethernet cable but still could not see TM.
    Confused
    LarryB

    Things are worse than I thought.
    I can see my TM backup on the desk top but cannot connect to it using Star Wars interface. I can't select it using TM "select disk" as it does not show up.
    More confused
    LarryB

  • Will it work to un-install Snow Leopard (booting from original disks) and then reinstall, then upgrade without erasing hard drive on iMac?

    I have both a bootable backup exernal hard drive and the original system disks.  I have read on these support pages that you cannot get snow leopard freshly installed without erasing the whole whole drive since the original installation disks are older than the current updated version. I have also read here that it is possible to get the system newly installed (though it's wise to have a back up of the rest of your files).  I need to know which can work.  Is there an un-install function after booting from a different source?   If I can get the system filess off the main hard drive and then install Snow Leopard from my original disks, then go through the upgrades, and end up with the rest of my files intact, that would be wonderful.  I have all the adobe design premium software on the system with their updates and would like to not spend hours and hours restoring it all.   And since I don't know where all the little bits and pieces of the Adobe programs get installed, perhaps it won't work anyway?
    thanks,
    Kahty

    I have read on these support pages that you cannot get snow leopard freshly installed without erasing the whole whole drive since the original installation disks are older than the current updated version.
    That is incorrect. You can install an older version of the same OS over itself. With Snow Leopard and later, unless you intentionally select to erase the drive, the OS removes and replaces all remnants of the current OS and leaves all of your third party apps, personal files and settings intact.
    I have also read here that it is possible to get the system newly installed (though it's wise to have a back up of the rest of your files).
    That is the correct information.
    Is there an un-install function after booting from a different source?   If I can get the system files off the main hard drive and then install Snow Leopard from my original disks, then go through the upgrades, and end up with the rest of my files intact, that would be wonderful.
    No, there is no way to remove just the OS files from a drive. At least, not in any manner you could call easy. There are thousands of hidden files and folders related to UNIX. Many apps won't even run correctly, or at all, if they're not on the same drive you are starting up to. So trying to separate your third party apps from the drive the OS is on is not a good idea.
    I have all the adobe design premium software on the system with their updates and would like to not spend hours and hours restoring it all.
    If your end goal is to simply get the contents of the external drive onto a new internal drive in a bootable form, you can use Disk Utility to clone the drive, or use one of two excellent third party apps; SuperDuper! or Carbon Copy Cloner.

  • I am trying to reinstall Snow Leopard on my iMac (Spring '08)...

    I am trying to reinstall Snow Leopard on my iMac (Spring '08) and part way through the install my screen shuts off and does nothing but my computer is still running. I've turned it off, unplugged it and let it sit for about 10 minutes. I turn it back up and hold down "c" to boot from disk and the install screen pops back up. I do a disk check and it passes so I try to install again, which it says it can restore the last install's process and then begins installing again. After about 10-15 minutes my screen shuts off and goes to sleep, my mouse and keyboard will not wake it up. All I have plugged in is the mighty mouse and keyboard. This is getting frustrating...

    Reset the SMC
    The computer sleeps or shuts down unexpectedly.
    https://support.apple.com/kb/HT3964

  • Error message when trying to install snow leopard

    Hello,
    I just tried to install snow leopard version 10.6 and get an error message mid installation that kicks the cd out of the drive and stalls. I can't complete the installation. I have a macbook pro 1,1 with 1.83 ghz processor with 1gb of ram and 25 gb of harddrive space left. i currently have version 10.4.11. any ideas about why this is happening or how to trouble shoot?

    See the following:
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).
    I suggest you backup your Tiger system, then boot from the Snow Leopard DVD, use Disk Utility to erase your hard drive, then install Snow Leopard. You can then selectively restore your files from your backup. To make this process easy be sure to create your new Snow Leopard user account with the same username that you have for your Tiger account. Any third-party software that you have you should reinstall rather than trying to copy from the Tiger backup.

  • IMac will not boot from Snow Leopard DVD or original Leopard disc!

    Hey,
    I am going mad! I am trying to update my iMac (with original Leopard installed) to Snow Leopard. Here is what I have tried:
    Using the Snow Leopard DVD:
    - A standard install: the disc ejects after about 15 minutes.
    - Put another working DVD in and verified it in Disk Utility, all ok.
    - Verified the internal hard drive in Disk Utility, all ok.
    - Verfied the SL DVD, all ok.
    - Decided to try a clean install, so backed up everything.
    - Tried to boot from SL DVD by using the Utilities option, it ejects the disc at restart.
    - Tried to force it to boot to the DVD by restarting and holding the C key, it ejects.
    - Restart holding the Option key, it ejects.
    - Restart holding the Ctrl, Alt and Option keys, ejects.
    - Everytime it ejects and starts up normally.
    - So I cleaned the disc, updated all the firmware, reset the NVRAM/PRAM via holding keys when restarting, and repaired disc permissions.
    - Tried to force it to boot again, ejects.
    - Tried to put the disc back in straight after it ejects with all the steps, still starts up normally.
    - Changed the start up disc in System Preferences to the SL DVD, restart, it ejects.
    By now I am readying the noose...
    - Dug out the original Leopard installation CDs.
    - Repeated all the forced boot restarts (C key, Option key, Ctrl, Alt, Option keys), same story.
    - Repeated changing the start up disc in System Prefs, same story again.
    - Call Apple Support, they told me to try everything I have tried and that the DVD drive is dodgy, well it works with everyhting else! Burning and reading! I really don't want to have to go to an Apple Store- it's miles away (a costly journey) and I just do not have the time for all of this.
    RAWR! Does anyone know what to do? Please? S.O.S.?

    Possible scenarios:
    1: The 10.6.3 SL retail disk is bad, it happens.
    2: Your not using the 10.6.3 SL retail disk but one from another machine which doesn't have the drivers for that machine.
    3: Your optical drive is funky or some other hardware issues.
    4: Your trying to install 10.6 onto a PowerPC based Mac, no can do.
    5: Your not using a wired keyboard for boot key commands, have some other hardware conflicts.
    Possible solutions.
    1: Copy the SL 10.6.3 disk using Disk Utility to another DVD, the error checking may resolve the original disk's issue.
    http://www.brokenhomeboy.co.uk/pierow/blog/2011/10/make-a-bootable-backup-snow-l eopard-install-disc/
    2: Make a SL bootable USB
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    3: Call Apple for a new 10.6.3 disk (and make copies for backup before Apple discontinues selling it)
    If your upgrading to 10.6 to get to 10.6.8 to upgrade to 10.7, be warned of this:
    1: Your 10.5 software will not work in 10.7, no more Rosetta or PPC based code.
    2: Your hardware will not qualify if it's a 32 bit Intel Core Duo, also you may experience slowdowns in performance over 10.6 (10.6 is the fastest OS X version for Intel Macs) in older Intel hardware (I suggest Early 2011 Mac's and later only for Lion)
    3: Mountain Lion 10.8 is reportingly coming out this summer and will not run on a lot of older Intel based Mac's because of heftier graphics requirements.
    4: 10.6 has the widest range of current avaialble software and drivers for third party hardware.
    My advice, stick with 10.6.8 and stay there, buy a new Mountain Lion machine after this summer. Skip Lion completely.

  • I get a white screen when trying to reinstall snow leopard

    I am trying to install snow leopard over os x mavericks when i put the disc in it tells me to restart the computer, when it boots up the screen goes white and stays that way the only way I can get out of this is to push and hold the power button and when it reboots hold the eject button on the keyboard to eject the disc or it goes back to white screen, how can I get the reinstall to work ? the system is a iMac 27" mid 2010 3.2 ghz 4gb ram 1 tb hd I bought this used and thought I could get a clean install by updating to os x mavericks when it didn't I got the snow leopard disc to try and put the original software back on

    Revert to a Previous OS X
    Revert to former OS from Mavericks
    Revert to Snow Leopard

  • Trying to install Snow Leopard, can't b/c time machine using hard drive

    I am trying to install Snow Leopard so I can then upgrade to Lion on my MacBook Pro.  (It's now running an older version of OS X.  I went through this whole process successfully on my desktop.)
    Snow Leopard is saying it can't install on my hard drive b/c Time Machine is using that drive for backups.
    I tried turning off Time Machine but that doesn't seem to make a difference.
    I don't have any available external drive at home-- is there a way to disable or change settings or uninstall Time Machine so that Snow Leopard will be able to install?  Is the best way to get an external drive and specify that as the Time Machine backup drive?  I'd rather just get rid of Time Machine on this computer for now, but I've read on here in other discussions that deleting it can cause other problems.
    Thanks for any advice!

    The Apple store may use or have these...
    You must repair the HD, your best bet is likely DiskWarrior.
    Your best bet is DiskWarrior, you need the CD/DVD though.
    http://www.alsoft.com/DiskWarrior/
    But others that may work…
    Drive Genius…
    http://www.prosofteng.com/products/drive_genius.php
    TechTool Pro…
    http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83
    Good luck!

  • Restore Snow Leopard From time Machine without an Optical drive

    I have a couple of year old Macbook with a bad optical drive.
    I want to pull the hard drive out of the Macbook and replace it with the original drive that came with the machine. The problem is that the original drive has OSX Leopard and I would like to get snow leopard on it. I have a good time machine backup that i could use, but i do not know how to restore the entire disk without using the OSX install DVD.
    Is there anyway that i can do a time machine recovery without using the optical drive.
    Thanks.

    In order to restore Snow Leopard to that drive, it will need to be formatted using Disk Utility and I can't think of a way to do that without the optical drive unless you use a different Mac or an external optical drive.

  • I am currently trying to load Snow Leopard onto my system and it is frozen

    I am currently trying to load Snow Leopard onto my laptop, I have the 10.4.11 system, but the process is stuck on 41 minutes remaing and has been for about half an hour, so nothing is budging!  Please help, I am too scared to stop it as the guy in the shop said "whatever you do just let it run its course!"  Thank you, Kate

    Boot from your bootable backup drive - restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for your external drive then click on the downward pointing arrow button.
    After the computer starts up do the following:
    Drive Preparation
    1.  Open Disk Utility in your Utilities folder.
    2. After DU loads select your internal hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Leave DU open and do the following:
    Clone using Restore Option of Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the internal drive. Source means the external drive.
    This will restore your old system so you can continue using the computer.
    An alternative to the above is that after formatting the internal drive restart from the Snow Leopard DVD and install Snow Leopard on the freshly formatted internal drive. You can then restore your Home folder and other applications through the Setup Assistant which will provide an option to restore your files from another Mac or hard drive.

  • Crashes while trying to reload Snow Leopard from the disc.

    I am trying to reload Snow Leopard onto a MacBook Pro. It crashes every time I attempt it. When starting up without the disc, I get a folder with a question mark. What is wrong? When attempting to start up using the Snow Leopard disc, it crashes.
    Any suggestions?

    The folder on the question mark is the firmware telling you it can't the bootable volume it was told to boot from.
    It might not know, or it's gone or the drive is dead or some other issue it can't find it.
    Hold the option/alt key down on a wired or built in keyboard and boot the machine into Startup Manager, there you can select from the bootable options if they exist or not corrupted.
    Also the disk can be inserted and booted (and ejected) from here as well.
    If after booting from the disk it crashes, the disk is likely bad or not compatible with that machine.
    How to erase and install Snow Leopard 10.6
    Reset your Mac
    How to revert your Mac to Snow Leopard

  • A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer.help please

    A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer. i even bought a new hard drive to do the clean install but the same thing happens. Please Help

    Your problem is not Boot Camp, in fact, is your optical drive. Win XP requires indeed sp2, but also the internal drive, does not work from external optical drive.
    For other possible tricks, please use the appropriate Boot Camp forum, not here. Mac OS X may be installed from both external and internal optical drive and/or internal/external partition of a disk, any disk. Windows is not so generous.

  • Im trying to instal snow leopard on my macbook. its running tiger 10.4.11 and it meets all the requirements  but it ask me for a restart to begin instalation progres, i restar it and it doesn't happen anything

    im trying to instal snow leopard on my macbook. its running tiger 10.4.11 and it meets all the requirements  but it ask me for a restart to begin instalation progres, i restar it and it doesn't happen anything. anyone can help me?

    I assume the restart was prompted during the installation process?
    First of all, that restart will take several minutes while files are moved into place and should not be interrupted.
    If it fails, or you have interrupted the process, you'll need to boot from the installer (hold down the C key on startup) and use Disk Utility to erase the drive prior to continuing the installation.
    That will wipe all data on the drive, though, so if you didn't make a backup before beginning the upgrade, you'll need to get your data off safely before proceeding. That may likely require the use of another Mac to access yours in Target Disc Mode.

  • I have OS X 10.5.8 on my iMac, I'm trying to install Snow Leopard. When I insert the disk and click install it will start to install, then once it gets about 1/4 of the way done my computer restarts and it spits the disk back out.

    I have OS X 10.5.8 on my iMac, I'm trying to install Snow Leopard. When I insert the disk and click install it starts, but when its about 1/4 of the way done the computer restarts and my disk spits back out. When I look to see if it installed it still says 10.5.8. Is there something I'm doing wrong?

      Model Name: iMac
      Model Identifier: iMac6.1
      Processor Name: Intel Core 2 Duo
    I bought the Mac OS X Snow Leopard Install DVD from the Apple Store.

  • TS1440 When I start up, there is only the flashing folder with a question mark on it. When I tried to reinstall snow leopard, there is no hard disk to be found.

    After rebooting my computer, there is only the flashing folder with "?" on it. I tried several things like PRAM resetting and whatnot, but nothing worked. I then tried to reinstall Snow Leopard, but it appears there is no hard disc to be found to install it. I also wanted to repair the disk first but it wasn't present in disk utilities. Did I lose my hard drive, or is this still salvagable?

    That is evidence that your hard drive has failed and needs to be replaced.

Maybe you are looking for

  • Tecra A3 106 Noise on Audio Output while Charging

    Hello all, My Tecra A3 generates an annoying noise on line out/headphone output while charging the battery. when it's unplugged, the noise goes off. Is that normal? Thanks in advance. Onur.

  • ZCM Personality Migration install causes problems with apps

    We have just started using ZCM and after users have the agent installed, we are pushing out the Personality Migration installation the next time they login. We have found that this is causing is strange issues with various applications after the user

  • PCA substitution exit

    Hi Experts, I have a requirement to substitute the profit center in a sales order and sales contract based on different criteria( information in VBAK, VBAP, VBKD and VBPA) . To realize this, I have created a substitution rule at app area PC and call

  • CMS.exe is not automatically started

    Dear Experts, I have BOE installed in my VMware. Os is windows server 2003, DB is Mysql. The BOE can work fine before, but after one day, I cannot logon infoview and CMS.I checked the CCM every services are running. But when i check the task manager,

  • App and software I don't knowif I want

    I downloaded a desktop "organizer" called virtue. I dont know what it does, nothing seems different, so I was going to put in the trash but it said I would lose what is on my desktop if I do.