Trying to sync my new phone and it says that I do not have enough access priviledges for this operation. Help?!?!
When I try to sync my new phone to my iTunes, it says that I do not have enough access priviledges for this operation. I can't figure out WHY?
Hello KYaple,
It sounds like there are permissions issues with iTunes. When you sync it may be trying to copy purchased items from your iPhone to your iTunes. Check out the article below to try and resolve it.
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Thanks for using Apple Support Communities.
Regards,
-Norm G.
Similar Messages
-
I recently had a hard drive crash and lost almost everything except for what I managed to save on Carbonite. When I got the new hard drive, I updated to Lion and began the laborious process of restoring my files. I think it is up to 40% done.
Anyway, I went to try to transfer my purchases from my iPad2 (4.3.3) and received the message: "You do not have enough access privileges for this operation" followed by: "Attempting to copy to Hard drive failed. You do not have enough access priviledges for this operation."
So, I did a search on the problem and have found similar complaints and some reasonable suggestions, which I attempted without success. So far I have:
1) Rebooted
2) Changed all the Permissions on the iPhoto Library and iTunes folders to Read & Write.
3) Used Disk Utility to Verify & Repair permissions.
Nothing is working.
HELP!Had the same thing happen to me a few weeks back when I switched computers and migrated. Here's what worked on my iMac, so maybe it'll work on your iPad, too. Go to User(your home folder)/Music. Select/highlight your "Music" folder. Then do Command-I ("Get Info" from the File menu), click on the padlock icon in the lower right of the new window. Enter your user password. Click on your username just above the now-open padlock. Select "Read & Write" if it's on "Read Only," "Write Only," or "No Access." Now having your user account with "Read & Write" privileges (it may have been this way already; still do this next step), click on the gear on the bottom-center of that window. Click on "Apply to all enclosed items." When the pop-up says "Are you sure?" (or the equivalent), say "yes." This will grant access privileges to your user account for all the music files inside your music folder--all your iTunes stuff included). Then you should be good to go.
-
I got a new computer recently and had no problem transfering over music and such. I went to plug in my iPhone to my computer, which I hadnt done yet. When I tried to sync it, I get the error message saying "You do not have enough access privlidges for this operation." I dont know what to do to change this...any advice???
Hello deborahjael,
Thanks for using Apple Support Communities.
To troubleshoot this error message in iTunes please follow the directions in the link below.
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
Take care,
Alex H. -
I keep getting an error message in iTunes when I try and sync my iPhone 5s. Message says "you do not have enough access privileges for this operation?". It is my personal computer and phone.
Hello magestecal,
Thanks for using Apple Support Communities.
To troubleshoot this issue where you're getting a permissions error when trying to sync your iPhone, I'd like you to please follow the steps in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Take care,
Alex H. -
During sync, itoons error message "User's iphone cannot be synced. You do not have enought access proviliedges for this operation". Never happened before, any ideas what to do? Checked and new computer is authorized. Greg
I hope this helps. Not the easiest fix, but I suspect it will solve the problem.
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/itun es-privileges-error-with-windows-7/d616e06f-ecdd-4d34-8d7a-a9936a91ad6e -
I cannot sync my iTunes library or any playlists to my iPhone due to a message that reads "The iPhone "-----" cannot be synced. You do not have enough access priviledges for this operation. I also have music on my iPhone that will not sync to my iTunes library. Any way to sync the two together?
I hope this helps. Not the easiest fix, but I suspect it will solve the problem.
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/itun es-privileges-error-with-windows-7/d616e06f-ecdd-4d34-8d7a-a9936a91ad6e -
In downloading iTunes onto my PC (Dell XPS 8700) with Windows 8.1 trying to sync my iPhone but receive keep receiving following error message and I just don't know how to fix: iPhone cannot be synced. You do not have enough access privileges for this operation.
I would greatly appreciate help with this matter.See if the user tip helps: https://discussions.apple.com/docs/DOC-6562
-
have a new computer and when ipod connected it synchronises up to the end when a message appears "Cannot be synced; You do not have enough access priveleges for this operation"
can anyone helpLaunch iTunes on your new computer then from the menu bar click Store / Authorize This Computer.
Try syncing.
If that didn't work, deleting the photo cache helped for the same issue here > https://discussions.apple.com/thread/997075?start=0&tstart=0
iTunes: Understanding the iPod Photo Cache folder -
I have just installed itune on a windows 8 OS and am am trying to sync my iphone but it cannot import photos and come up with the error message "you do not have enough access privileges for this operation"
Hey there Opal4,
It sounds like you are unable to use iTunes due to this error message about not having enough access privileges. According to the following article you may need to change the permissions on the file directly:
These messages occur if permissions are incorrect on your designated music folder or on a folder inside your designated music folder. Permissions are settings that determine who can read, write to, or execute a file or folder on your computer. Every file and folder on your hard disk has an associated set of permissions.
Example: If permissions are correct on your Music folder, but incorrect on the U2 folder inside your Music folder, you would be able to add other music to your iTunes library, but not that new U2 album.
Windows XP:
How to set, view, change, or remove file and folder permissions in Windows XP
From: Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
Thank you for using Apple Support Communities.
Regards,
Sterling -
Can anyone help me with this problem. ITunes message," The iTunes library file cannot be saved. You do not have enough access privileges for this operation." I have administrator account and transferred files from old PC. I downloaded new iTunes program on new PC. I synced my iPhone to new PC, no problem. I deleted old account after indicating shared files to new admin account. Can anyone help?
A belated reply, as the problems itunes has have discouraged me from using it much. If you uncheck the "read only" box, it doesn't stay that way! Next time you use it, the box comes up checked.
I'm still having that problem, even when I open iTunes as administrator.
I've yet to see the answer to this problem. I use itunes mostly to download audiobooks, and I'm ready to download more, and want to save them! -
hi ! i have ipad 2 and i was trying to sync through itunes . but cannot sync and getting message such as your ipad cannot be synced . you do not have enough access privilages for this operation .
my laptop is windows 8 licence . kindly help me to solve thisIf your iPad has a passcode lock, have you tried unlocking the iPad before attempting to sync it with iTunes?
Do you have the latest version of iTunes installed on your Windows PC? -
While trying to sync my iPhone, I get this message "This iPhone cannot be synced. You do not have enough access privileges for this operation." Why don't I have this access privilege? How do I fix this?
See if the user tip helps: https://discussions.apple.com/docs/DOC-6562
-
When trying to install a digital copy, everything works including the downloading, until it is processing to iTunes then I receive "You do not have enough access privilages for this operation. Check the disk to make sure it is clean and retry." error.
Tryed several times, Same Results. Tryied rebooting, logging out & into iTunes, Same Result. Seems to do this error with every digital copy, but works eventually. But now will not post digital copy to my iTunes at all. Just same error over and over.
Any Thoughts??Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!
-
I recently installed a new hard drive on my PC, downloaded iTunes, updated the software on my iPod touch and now I get this error message when I try to sync: "you do not have enough access privileges for this operation." It never did this before, whether it's the upgrade in software or something in iTunes, but it's very frustrating, since I'd like to add more things to my iPod.
See:
iPhone - not enough access privileges: Apple Support Communities -
I have had itunes on my computer for a while now and was working beautifully. I had a new printer installed by a tech guy with had to do something to windows 7 to get it to print correctly. Now itunes is acting up. When I try to download updates or sync with my iPad I get an error message saying "You do not have enough access privileges for this operation". Can anyone help?
I'm assuming you are synching to a Mac via iTunes? If so, you need to fix and reset your disk permissions using the Disk Utility app on the Mac.
Maybe you are looking for
-
How to open new window in web dynpro
I want to open a new window with specific URL in web dynpro on a button's click event. waiting for your suggestions to do this. thank you,
-
CAST function in Oracle Forms9i Version 9.0.2.9.0
Hi, When trying to compile a procedure with line SELECT * FROM TABLE(CAST(pl_tbl_employee AS sc_typ_employee)) I get the following error "Implmentation restirction(may be temporary)ADT or schema level collection not supported at the client side with
-
my grandsons were using my computer, now my pound character types as a # sign, how to I get my pound sign back
-
Hi Experts, I have uploaded the logo using the transaction se78.when i refer the logo in the smartform,output of the logo background color is in grey color.I need it in white color.Could you please help me out on this issue ? Thanks & Regards, R.Dhin
-
hi folks, after using lightroom 1.0 for almost a month, i posted a draft of a review article in my lexar blog. the final version will be published this week in the Lexar ProCorner. please take a look and bash it as you please :) sorry, there are no s