Trying to use Variables with the Unknown Computer collection to prompt Task Sequence for Domain, Join Account, Join Password, and Join Location.
I want to use SCCM 2012 R2 and OSD, to boot a bare metal machine, install and OS, and bind it to Active Directory. The catch is that I want the deployment process in SCCM to prompt for the following pieces of information, and then use that information to
bind the computer to Active Directory (W/O using MDT) instead of supply the data in the task sequence.
Computer Name
Domain
Domain OU
Domain Join Account
I am approaching this in a similar fashion as stated in this blog.
http://osdblog.com/2013/06/26/add-a-prompt-for-a-computer-name-in-your-sccm-deployment/
I have added the following collection variables to the unknown computers collection:
When I launch the task sequence, I am prompted as I would expect. I input the desired information, the deployment competes, but it does not bind to the domain. Here is what my TS looks like. I intentally disabbled the apply Network Settings step
because it forces you to enter specific information if it enabled. I don't want to that, thus why I am trying to use the variables.
My SMSTS log does not have a whole lot of meaningfull data, but I can post it if someone wants to see it. The only possible thing I could think of would be drivers, their are some driver errors in the log. However, if I turn on the Apply Networking setting
process in the task sequence and turn off the variables, the machines bind fine. With that in mind, I would not think my problem would be driver related. Anyone out there have expertise in using a process like this, that could assist?
--Tony
Awesome! Thanks. One more thing, how should I supply the OSDJoinPassword variable? Should I just enter %OSDJoinPassword%
for Password and Confirm Password? I can not tell if it will actually read it as a variable or try to use "%OSDJoinPassword%" for
the actual password.
--Tony
Similar Messages
-
HT204268; I have purchases on an aol login pre 2008 and all recent stuff under an apple id. I currently see and use everything when i login with the apple id. After March 31st will my apple id account still show and contain all?
I understand the instructions to create a new account id (apple id) from the old aol account. However, does this mean my purchases will be split into 2 accounts; or does the fact that I currently see everything under my apple id (regardless of the purchased by username) mean this will all still appear in my current account as it does now?You see them where when you login your non-AOL account ?
If you currently have two accounts (the AOL username account and an email address account) then you will continue to have two accounts, and nothing should change when you update the AOL account to be an email address (apart from how you access that account).
You will just be renaming the account to have an email address for accessing it, not creating a new account. -
Using variable with the same name as field name?
I have a complex proc where I have variables with the same name as field name used on a query. something like this:
SELECT a.id_table WHERE a.id_table = id_table
where the last id_table is a parameter sent to the proc:
declare procedure myproc(id_table int)
Is there any way or notation to declare the variable inside the query as a variable or I have to use a different name?Well, variables are not the only thing you have to change if you want to switch to Oracle.
Although I don't think it is good practice (to use variable name same as column name), here is one example how you can achieve it using EXECUTE IMMEDIATE and bind variable
SQL> select deptno, count(1)
2 from scott.emp
3 group by deptno;
DEPTNO COUNT(1)
30 6
20 5
10 3
SQL> set serveroutput on
SQL> declare
2 deptno varchar2(10);
3 i number;
4 begin
5 deptno:=10;
6 execute immediate
7 'select count(1) from scott.emp where deptno=:deptno' into i using deptno;
8 dbms_output.put_line('OUT ---> '||i);
9 end;
10 /
OUT ---> 3
PL/SQL procedure successfully completed.
SQL> Message was edited by:
tekicora
Message was edited by:
tekicora -
I just ordered an ipad air and I have an ipad 2. Can someone help me so I can use both ipads from the same computer. The new one is for my husband and I am going to take the ipad 2. Do I have to do something different since they will be using the same computer. Any help you can give me would be appreciated. Thanks in advance for your help.
It's no problem. I hope this explanation simplifies the information in the Link Demo gave you. It's how I think most people do it...
To avoid having to pay again for apps you have already purchased, use the same Apple ID (likely the current one) on both devices. You can adjust this in:
Settings > iTunes & App Store.
So that you can communicate with each other, use separate Apple IDs for iCloud, Messages, and FaceTime. Adjust those in:
Settings > iCloud
Settings > Messages
Settings > FaceTime -
Using variables in the SQL Results in Dashboard Prompt
I use the ff query to limit my results on my dashboard prompt. The variable value is given by a dashboard prompt within the same page.
SELECT Owner.Name saw_0 FROM "iSupport Service Request" WHERE "- Service Request Attributes".Platform =
'@{promptedPlatform}' ORDER BY saw_0
It works fine with this query, only when selecting a particular selection in the prompt that feeds the variable data. Is there anyway to have this particular prompt by default(when the page first loads, load all the values possible prior to filtering by the variable?Hi Harley ,
The frame labels are 1,2,3 etc
sym.setVariable("subselect" , 0); // in the stage composition ready
Then in the menu you can set the "subselect" variable to 1,2,3 and then call sym.play(sym.getVariable("subselect"));
Thanks and Regards,
Sudeshna Sarkar -
Hi guys,
I’m new to Flash sort of but most definitely new to
actionscript and programming in general. I’m hoping someone
can help me with a practice thing I’ve been working on - I
thought this would be easy to start of with but it is prooving very
challenging;
I’m trying to create an image fade on a box when the
mouse is within its borders. Essentially I want to get 0% _alpha on
the left edge of the box and 100% on the right edge and dragging
the mouse over the box in the x coord will interactively raise or
lower the _alpha %.
--see attached code for details--
red_mc is the name of my red box which is 123pixels center of
my stage which is 550. When I first started this it was from an
online tutorial but it was for the entire stage hence my division
by 550 pixels in the changeAlpha function. I need help trying to
control the return values for _xmouse within my box to control the
_alpha property.
Any help would be great. Thanks!
Regards,
Nick.1) Use getBounds() to determine the actual coordinates the
box takes up. If the box's registration is not in it's upper left
or left, other methods could be flaky.
2) Find the difference between getBounds().xMin and _xmouse
3) Find the percent(from 0 to 1) of the box's width that
difference is(say, a little under half way from left to right, or
.45)
3) Multiple times 100 and that's the alpha
Here:
red_mc.onRollOver = function() {
mouseInterval = setInterval(changeAlpha,10,red_mc);
red_mc.onRollOut = red_mc.onReleaseOutside = function() {
clearInterval(mouseInterval);
function changeAlpha (mc) {
// pass in the MovieClip as an argument, so it's more
flexible
var bounds = mc.getBounds(_root); // find target mc's bounds
on _root
var xDif = _root._xmouse-bounds.xMin; // determine how far
from mc's left bound the mouse is
var percent = xDif/mc._width; // determine what percentage
of the mc the mouse is at
mc._alpha = 100*percent; // max alpha times percent gives
desired alpha
trace(mc._alpha);
updateAfterEvent(); // this forces Flash to redraw,
independent of frame rate
Hope that helps -
Details:
Album: We Can Make The World Stop (by: The Glitch Mob)
Songs: I bought all three songs in the album which counts as buying the album yet the Digital Booklet won't download like it says it should due to the album being bought which is what I did.
Digital Booklet - We Can Make The World Stop - EP
Question: Can someone please help me get this digital booklet that i should have already had a while ago?Thinking back to when I've seen displays of newsprint that's been greatly magnified, being able to see the halftone screen pattern seems important. It gives the display a look of authenticity.
You say the library can scan at 600 ppi. If that's 600 ppi of a greatly reduced image on a piece of microfiche, it may not give you the resolution you're looking for, and it's entirely possible that getting a quality optical print then scanning it would give you better.
I don't see how you can plan how to proceed in anything like specific detail if you don't have an image that represents what you're really going to be starting with in detail. Perhaps getting one scan might be a good idea.
After that, you just need to figure out what ppi your final overall panel design is going to be at, and upsample the newspaper clippings to match, so that they're the size you need them to be.
-Noel -
I got a new computer and my IPOD will not sync with the new computer.....I have a ITUNES account on the new computer and is downloading music just fine but it will not sync to the IPOD....What should I do to sync my IPOD? thanks
Copy the ENTIRE iTunes folder from the old computer to the new computer.
Attempts to sync an iDevice to a new computer will remove all content from the device and replace it with content from the new, empty library. -
Why can't two different users use Itunes on the same computer with different log ins
Why can't two different users use Itunes on the same computer with different log ins
Pmorgan5672 wrote:
Why can't two different users use Itunes on the same computer with different log ins
They can, but not at the same time.
If one user left iTunes running, and another user tries to use iTunes from a different Windows user ID, that second user will get an error message. If they really want to use iTunes, they either have to beg the first user to log in and close iTunes, or else they have to restart the computer.
If you are asking the technical reason why, it is something about context switching. -
I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.
You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
http://support.apple.com/kb/ht4108
Cheers, Tom -
I tried updating my iPhone with the latest update. It downloads the update to my computer fine, but when it tries to update the phone, I keep getting a fault code of 3014. I've tried it four times.
Try taking it to the nearest Apple Store. They should have computers there that they can use to get your iPhone out of recovery mode. Make an appointment first.
-
i bought a new computer. the itunes app allows for home shareing, file transfers, etc.. but i want to discontinue the syncing with the old computer and sync my ipod touch now only on my new system... but i cant seem to disconnect that old relationship at all.. when i try to syncit says that my ipod is already synced with another computer, do i want to discontinue that and only use the new informationon this computer? i dont want to do that yet because it doesnt seem like everything has come over, and i am afraid of losing songs that i downloaded from cds, etc..
if you don't want to sync it because you don't think that everything has been transferred then i would check first if you can, before you commit to used only the data from your new computer.
though, im not sure if this is true, but i think that when you sync your ipod to a new computer it will take the items from your ipod and put it on itunes, like when you purchase something on your ipod and it gets automatically transfered, but don't take my word for it. -
I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%) If I move the application window to another screen it adjusts it correctly – leaving all the pallettes, menus and tools correctly sized as they are on the retina display Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see? There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light. MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014
I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
If "open in low resolution" is unckecked the appearance is good but the very small size.
See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt. -
I am using ipad2 with the latest version. While trying to make a apple Id, In the payment information cannot get the option of "none" what will I do. Please help.
You are following the instructions on this page for creating a new account : http://support.apple.com/kb/HT2534 e.g. selecting a free app in the store and tapping on 'create Apple id' when 'buying' the app ? I've just tried it and it works for me
-
my 2g iphone is stuck in recovery mode after trying to restore it with the latest itune version. It does have a sim card but is not connect it ,I was only using it with wi-fi. Now i-tune will not connect it only show i-phone. I did manage to restore it again ,but then it will go back to restore mode.
What shall i do now?
ThanksRestore ?
How ?
Maybe you are looking for
-
Only one signature for all mail accounts very limiting
while the iphone is a very cool tool, i'm using the iphone for personal and work email, and i find it very limiting that there is only one signature possible for all mail accounts. standard, we all found out is written "written on my iphone" or somet
-
How to filter a report by a predefined but reduceable list of words?
I am trying to filter a report by several different input values. I want to be able to search by date, site, multiple regions (DEV_KEYS), multiple alarm types (ALM_TEXT) and omit entries containing a predefined, but reduceable, list of words (the E#s
-
My MacBook pro isn't HDCP?
I tried to Watch Grimm s01e01 that I bought from iTunes and it keeps telling me that it can't play because my monitor isn't HDCP compliant, but I can watch my Season 8 House episodes from itunes in 720 just fine. To be clear, I don't have an external
-
Hi All. Would someone mind giving me a heads up on my options for editing Pages documents on an iPhone? I am using Things for notes but I have longer documents saved in .pages format on my MobileMe account and would like to be able to edit these whil
-
I'm getting kicked out of facebook on my ipad. Any fixes?
I keep getting kicked out of facebook on my Ipad2. Has this happened to anyone? Are there any fixes out there?