TS130 (1105) Driver Error in Installing Acronis Backup of Windows 2003 R2

I have run into a serires of errors which Lenovo support believes are related to the Intel Management Driver, but we have been unable to locate the appropriate drivers to deal with these error messages. The errors I have received are as follows:
PCI/VEN_8086DEV_1C02&SUBSYS_400017AA&REV_04 for Windows Server 2003 Standard
PCI/VEN_8086DEV_1C26&SUBSYS_400017AA&REV_04 for Windows Server 2003 Standard
PCI/VEN_8086DEV_1C2D&SUBSYS_400017AA&REV_04 for Windows Server 2003 Standard
halmacpi.dll required to install ACPI MultiprocessorPC (IDtandard computers) in Windows Server 2003 Standard
Support has gone through the available drivers with me but we have not found a solution. Does anyone know what to download to deal with these issues--my Acronis backup of some critical software for my business will not run without these drivers installed.
Thanks!

You must not be familiar with Acronis software.
Let me backup: I had previously purchased a Lenovo server in Dec. 2012 to rebuild my old windows 2003 OS system (a Dell). We successfully moved all the data and set up the software programs on the original Lenovo server with the sole exception of a single SQl based software program that none of the IT experts I consulted with knew how to move. I had called the company who owns the rights to that software program repeatedly in the last 1 1/2 years about the fact that my server was dying, they hadn't provided installation files, I needed to reinstall my license (which was still good) on the new server or I needed to buy a new license, they didn't return my calls.
So, then I bought a second Lenovo server two weeks ago after the old Dell server died yet again (server board this time, Dell thinks) in order to restore this program. Since I don't have installation files, and the company won't get back to me about selling me a new copy, the only way to restore the program is with Acronis, which I had used successfully in trial version for prior hardware failures of this server (this time I have the full version). Acronis does a bare metal install of the entire image of the server; however, to use universal restore onto a new hardware system, you must have the proper drivers. I keep getting errors that these three Intel drivers are missing. So, tier one Lenovo support asked me to post to this board because they couldn't help.
Kristie

Similar Messages

Restore 2003 std system state backup on windows 2003 Enterprise

Hi
I have taken windows 2003 std SP2 full backup (systsem state, C drive, and Data drive) few days back. My question is, can i restore this backup on windows 2003 Ent SP2 version?.
Regards,
Suhag.

Hi Suhag,
please check this link: http://support.microsoft.com/kb/249694#method4
It is well explained there. The preferred method to use in order to restore Windows 2003 backup is by using ASR.
However, I think you can backup/restore only the same version of the OS:
"Operating system version
The source and destination computers must use identical operating system versions and identical Windows stock-keeping units (SKUs). For example, you can't back up Windows 2000 Server and then restore it on a computer that is running Windows 2000 Advanced
Server. Also, the source and destination computers should both use retail versions of Windows or the same OEM version of Windows. The best practice is to install Windows on the destination computer by using the same installation media that you used to install
Windows on the source computer."
Also, servers also have to have the same HAL (hardware Abstraction layer) which basically means the same hardware (CPU, MBU and so on).
Hope this helps.
Regards,
Vladimir

How to install oracle 9iASR2 on windows 2003 server

Hi,
I want to install oracle 9iasr2 on windows 2003 server. Pl guide.
Arvind

I want to install following component
Oracle 9i form server & report server
Oracle HTTP Server in SSL mode
Oracle As Web Cache
Regards
Arvind

Not showing company list after installing B1 2007 on windows 2003 standard

Hi gurus,
I am facing a problem regarding B1.System not showing company list after installing B1 2007 on windows 2003 standard edition.
Plz help me.
Thanks in advance
Regds
Maddy

Hi Maddy,
Please tell me did u upgrade from 2005 to 2007 or u performed a new installation of 2007???
Vasu Natari.

Install Oracle VM on WIndows 2003 Sevser/XP/Vista

Has any one successfully installed Oracle VM on WIndows 2003 Server or XP or Vista?
Is it possible to migrate an exisitng Oracle Express Edition database to Oracle VM? Or the Oracle Express Edition has to be installed on Oracle VM on one platform before it is portable to another machine/server.
Is there any viewlet on how to use Oracle VM?

To answer your first question: Oracle VM Server can NOT be installed on Windows.
From the OVM-FAQ:
Does Oracle VM require a host operating system?
No. Oracle VM installs directly on server hardware and does not require a host operating system.
This applies to the VM Server. For the VM Manager:
The Oracle VM Manager works on the operating system Oracle Enterprise Linux 4 Update 5 or later.
FYI - these servers are all Linux-based.
You might check the documentation in the "Virtualization Technology Center": http://www.oracle.com/technology/tech/virtualization/index.html to find some more answers.
Message was edited by:
hbokho

Installing 9i R2 on windows 2003 server.

Hi Folks,
I am planning to install 9i R2 on Windows 2003 server, i want to know what 9i specific release i should install, whether i need to install some patch ? second if some one can point me to howto 9i R2 on windows 2003 server.
TIA,
Regards,

Thank Corrado & Sybrand for the value able input, in fact we are already using 9i at production environment, while the company who have developed our application have recommended us to use 9i R2 at DB Server, in our current 9i server we have windows 2000 server, our company have planned to move to windows 2003 server while upgrade to 9i R2, later when developers will ask us to move to 10g or even 11g we will upgrade, but now we are forced to stick with 9i R2.
please advice me keeping the situation in view.
Thanks again.

Installing mini sap on windows 2003 server..............

hi friends,i want to install mini sap on windows 2003 server, i have two cds for that but i m not getting how to install this,n also want to know,can it be installed on windows 2003 server or it can be installed on windows 2000 only.
please help me out
thanks

Hi,
Depending on which mini sap version you are trying to install. If you have 2 CD's, it means that it is an old version, for starting with 6.2 mini sap comes in 3 CD's (1 Kernel + 2 Database). As for the steps to install, just insert the kernel cd and an HTML file will pop up with the steps you need to do before, during and after the installation. As for installation issues please refer to:
http://www.sap-press.com/support.cfm?account=&product=H958
Regards,
Lachker

Cant install oracle 8i in windows 2003 server

hi,
I am a newbie in Oracle.While Im trying to install Oracle 8i in Windows 2003 server , setup is not running.It didn't show anything.When trying to run from auto run, after splash screen nothing came.I formatted hard disk,changed two more hard disks,.changed machine...but cant install it in no way... It is the same case in Windows XP home edition.
But it is running in one of my friend's machine(windows 2003 server)
Please help me with valuable solutions.
Thanks in advance

Did your friend install on W2003 or upgrade from an older version of the OS?
When trying to run programs on an OS that is not certified for the programs, it is hit-n-miss whether the OS actually has the support files needed for the programs.
Think about this: the Oracle environment needs OS support in the form of DLLs and other files. The contents of the DLLs are made visible as APIs. Each time Microsoft releases patches, it is possible that the APIs that Oracle used are changed. This is extremely true when a new version of the OS is released, and even more true with stripped versions such as XP Home.
If your friend installed and then applied patches, [s]he may have hit the proper API combination. If you appled patches first, you may have skootched your APIs to the point that Oracle can not longer install.
Even if you happen to get it installed, you run the risk of getting clobbered any time you install a new Microsoft patch. The risk is minimized when you use a certified combination of the OS and application.

Problem: VSS error with 'SQL Server Backup to Windows Azure Tool' installed

When 'SQL Server Backup to Windows Azure Tool' is installed, shadow copies cannot be enable and backups fail. When attempting to enable shadow copies, we get a "volsnap" error: "The shadow copies of volume X were aborted because
of a failed free space computation". After uninstalling the "Tool", VSS works. Reinstalling "Tool" causes the problem to return.
While the error suggests a space issue, there is plenty of space on the server's two volumes. Additionally, another 100GB volume was added and VSS storage was allocated to it; still received the error.
Issue seems to point to 'SQL Server Backup to Windows Azure Tool'.
Environment: Hyper-V guest: "Windows Server 2012 R2 Standard" with "SQL Server 2008 R2 Standard". Using "Azure Storage" for SQL backups.
Suggestions?

Hello,
Yes, we have a confirmed interference between the tool and the VSS Framework. This was identified very recently and is under investigation by the product group. Since the issue is within the filter driver shipped by the tool, that unfortunately means that
you currently need to choose between the tool and a working VSS Framework. If the latter is more important, then uninstall the tool (that will require a restart).
We apolologize for the inconvenience. I'm going to try to get the home page of the tool updated to avoid other situations like yours. Hopefully we should see a new version of the tool soon.
As a side note, recent versions of SQL Server can directly use Azure Storage as backup target, see
http://msdn.microsoft.com/en-us/library/jj919148(v=sql.110).aspx.
Regards,
Guillaume Fourrat - Microsoft France

Portal Drive Error--re-install SAP NW Portal Drive software and try again

Dear Experts,
Could you please let me know if there is any permanent fix for
Portal Drive inconsistence behaviour.
1.We use NW2004s SPS 13.
2.After the installation of Portal Drive (version 4.5.6796 ) on an
desktop, windows is not stable and must be restart (cold start).
3. After the restart the problems still exists and only a
deinstallation resolves the problem.
4. Sometimes the problem occurs on connecting to a service,
sometimes on disconnecting.
Sometimes on starting windows, but before the load of Protal
Drive.
5."Presently we are getting error SAP NetWeaver Portal Drive is not installed or configured correctly.Please re-install SAP
NetWeaver Portal Drive software and try again"
6. If we uninstall it and reinstall, it is working fine.
I wanted to know if there is any permanent fix for this inconsistance in Portal drive.
Because i have received complaints from more than 9 users in this week.
Really thanks for helping me
Vishali.B

Hey just a update, so even though apple said the HDD was fine because of the S.M.A.R.T status and it was been picked it would be fine I did not agree, took my iMac apart went out to the local computer shop picked up a cheap 1tb WD HDD and now the iMac is worked fine and smooth :-)
So now I know that was the issue I can order a nice new SSD for the iMac and use the new HDD I got in an external case :-) just incase anyone had the same issue that's the fix. Buy a new HDD or SSD

Error Installing patch 6272725 on Windows 2003 server

Hi all,
I am trying to install the RUP3 patch on Windows 2003 server. I am getting the following error when installing patch 6272715 which is required to be installed before installing patch 6141000. If i continue installing patch 6141000 after ignoring this error, i get same error during installation of patch 6141000. Please can any one suggest me what i should do to get rid this error.
AD utilities can support a maximum of 999 workers. Your
current database configuration supports a maximum of 83 workers.
Oracle recommends that you use between 2 and 4 workers.
Enter the number of parallel workers [2] :
AutoPatch will run in parallel mode.
Did not need to apply new applterr.txt.
Applying new applprod.txt (if any)...
Did not need to apply new applprod.txt.
Performing version checking for driver files...
Log and Info File sync point:
Mon Nov 26 2007 12:33:27
AutoPatch found some files which it will not apply.
These files are listed in the AutoPatch informational message file.
Copying driver files into installation area...
No driver files were selected for copying.
Skipping...
ForceCopy driver files into installation area for Specified driver
since no such action is present for this driver file
Screening out files not valid for this installation...
Determining valid on-site files...
Extracting object modules from product libraries...
setEnvAdrelink: Error: Cannot open registry key:
SOFTWARE\ORACLE
aiosp2() Error: failure in usdspn()
Contents of error buffer are:
"usdsop cannot create a new process
Cause: usdsop encountered an error creating a new process. [Reason].
Action: Check that your system had enough resources to start a new process. Cont
act your system administrator to obtain more resou (RE"
An error occurred while extracting files from library.
Continue as if it were successful [No] :
--- Thank You.

Sir,
I am posting the output as told by you.
G:\>which ls
ls: Command not found.
G:\>c:
C:\>ls
'ls' is not recognized as an internal or external command,
operable program or batch file.
C:\>cd e:\cygwin\bin
C:\>e:
E:\cygwin\bin>which ls
ls: Command not found.
E:\cygwin\bin>
I am also posting the output of adadmin utility in which i tried ti relink FND programs
Enter list of products to link ('all' for all products) [all] :
Generate specific executables for each selected product [No] ?
AD Administration can relink your Oracle Applications programs with debug
information. Oracle recommends that you do not relink your programs
with debug information unless asked to do so by Oracle Support Services.
Relink with debug information [No] ?
Relinking selected modules in Application Object Library.
setEnvAdrelink: Error: Cannot open registry key:
SOFTWARE\ORACLE
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 33: a
wk: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 203:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 534:
cat: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 548:
awk: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 573:
cat: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 575:
rm: command not found
Usage: adrelink force=y [<optional args>] <targets>
or: adrelink force=y [<optional args>] filelist=<file>
where <targets> = { <product module> [<product module>] ... }
and <product module> = "<product> <module name>"
- <product> should be in lower case
- <module name> should exactly match the executable name
Valid <optional args> are:
envfile=adsetenv.sh
Used only by the 'adsetup' script
link_debug=y
Will we link executables with debug or not? Default is 'n'
backup_mode=none
Which executables will we back up when linking with force=y?
Default is 'file'. Meanings are:
- none: do not back up any executables
- all : back up all executables
- file: do what $APPL_TOP/admin/adlinkbk.txt says to do
Type 'adrelink examples' to see some examples of running adrelink.
An error occurred while relinking application programs.
Continue as if it were successful [No] :
It is clear that there is some problem with Cygwin. I have renamed the following executabes after the cygwin installation.
gcc to cc
egrep to grep
gawk to awk
gnumake to make
i have also copied which.exe to "Windows\system32" directory from "cygwin\bin" folder and
Copy LINK.exe to "Windows\system32" directory from "VC98" directory.
Please tell me if there is something wrong with Cygwin installation.

Error to install Xcelsius 2008 on Windows vista. Error 1935.

I have a big problem, I need install Xcelsius 2008 on Windows vista, but when I install the software apper the nex message:
Error 1935 Error al instalar el ensamblado.
"Microsoft.VC80.ATL,type ="Win32",version= "8.0.50727.762",pubicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"". Consulte Ayude y soporte tecnico para obtener mas informacion.

From a brief Google search, I determined this error message is from Vista. It is not being produced by Xcelsius. You will need to do your own search and determine what is causing Vista to report this error. You can also try installing using instructions for Xcelsius installation on Vista posted elsewhere in these forums.

Error while installing ORACLE 10G on Windows

Dear All,
Previously i had installed ORACLEM 9i. I deinstalled using UNIVERSAL INSTALLER .Now when i try to install ORACLE 10g it is giving error
ERROR : ERROR IN Writing to direcotory c:\documets~\rajeshrr~1\temp\Orainstall2009-08-23.Please ensure direcotory is writable and has alteast 45mb disk space.Installaion can not continue.
While installing i have credential of administrator i.e. for rajeshr is in ADMINISTRTAOR group.
Please inform any thing need to be need from my side.
Thanks in advance.
Regards,
Rajesh.
Edited by: Rajesh.Rathod on Aug 23, 2009 6:17 AM

Rajesh.Rathod wrote:
Dear All,
Previously i had installed ORACLEM 9i. I deinstalled using UNIVERSAL INSTALLER .Now when i try to install ORACLE 10g it is giving error Which Oracle 10g on which Windows version ?
Nicolas.

Error while installing CE SR3 on windows

I got the following error while installing SAP NetWeaver Composition Environment 7.1 SR3 Evalution SDN Version - Java EE only
on my Windows XP, 1 GB RAM, 1.6 GHZ processor speed
An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS: See output of logfile configtool.0.trc: ' INFO: Loading tool launcher... INFO: [OS: Windows XP] [VM vendor: SAP AG] [VM version: 5.1.000] [VM type: SAP Java Server VM] INFO: Main class to start: "com.sap.engine.configtool.batch.BatchInstall" INFO: Loading 51 JAR files: [D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jce.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jsse.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_smime.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_ssl.jar, D:\usr\sap\CE1\SYS\global\security\lib\tools\w3c_http.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jaas.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jdbc.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jload.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jperflib.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jsizecheck.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartup.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartupapi.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\jstartupimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comsl.ut.infoprovider_lib.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comsl.ut.manager.offline.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comslctcimport.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcantlrruntime.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblconfigimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbldeploycontrolleroffline_phase_asm.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbliqlibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljdsrjdsr.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_dummyframe_dummy.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_dummykernel_dummy.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljkernel_utilimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbljrfcimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcbloffline_launcherimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblopensqlimplStandalone.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcblslutilityimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcdddbcatalogimplCatalog.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcdddbdictionarydatabaseimplDictionaryDatabase.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcexceptionimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtci18ncpjarIMPL.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjebootstrapimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjecfscontainerstandalone_impl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeclientlibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeconfigtool.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeextramile.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeofflineconfigurationimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeofflinelicense.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjeoffline_deployimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcjewebcontainerimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcloggingjavaimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsapxmltoolkitsapxmltoolkit.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsdtcvlimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecdestinationslibimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecinstallertoolsimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcseclikeylikey_assembly.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecsecstorefsjavacore.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\servlet.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\tcje~cl_deploy.jar, D:\sapdb\programs\runtime\jar\sapdbc.jar] INFO: Start PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path '.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.
Plz help me..itz urgent,
Cheers,
Aravind.

Rajesh.Rathod wrote:
Dear All,
Previously i had installed ORACLEM 9i. I deinstalled using UNIVERSAL INSTALLER .Now when i try to install ORACLE 10g it is giving error Which Oracle 10g on which Windows version ?
Nicolas.

Installation package is not supported by this processor type error while installing SqlSysClrTypes.msi in windows 7

Hi Team,
I am trying to restore/design few SSRS reports in my PPS Dashboard Designer 2013. On my process I got the error "Failed to load the appropriate report editor" and to rectify it I tried installing the SqlSysClrTypes.msi on my machine (32 bit). But
while installing, got the error "The Installation package is not supported by this processor type". kindly help me in getting link for downloading the correct version on the add-on.
Thanks,
-Arsath

Try below msi
http://download.microsoft.com/download/B/6/3/B63CAC7F-44BB-41FA-92A3-CBF71360F022/1033/x86/SQLSysClrTypes.msi
http://social.technet.microsoft.com/Forums/lync/en-US/dab8767e-92a0-4cee-aad8-1e216084acfa/getting-error-on-installation-of-sqlclrtypemsi-on-windows-server-2008-r2-64-bit-machine?forum=ocsclients
install the sqlsysclrtype.msi for sql server 2012
http://stackoverflow.com/questions/14991693/created-msi-but-get-installation-package-is-not-supported-by-this-processor-type
If this helped you resolve your issue, please mark it Answered

TS130 (1105) Driver Error in Installing Acronis Backup of Windows 2003 R2

Similar Messages

Maybe you are looking for