TS1362 I have a Mac Pro tower, am running osx and iTunes will not work.. It basically just stopped working after having run faultlessly for...years... I can see all the songs, playlists etc, but the progress bar will not progress..it's 'stuck'. Suggestion

I have a Mac Pro tower am running OSX and iTunes will not work. It has always worked flawlessly. I can see all my iTunes content- my playlists, my songs et cetera, But I cannot play anything. The progress bar is  'stuck'...any suggestions?

Thanks. I have been using iTunes since its inception and have never had a problem...I'm using the latest version. The progress bar is the bar that moves when you're playing a song..it just won't start when I double click on a song,..have tried quitting, rebooting etc but nothing works. Apple are useless-they have told me twice they've tried to call me 'momentarily', but I've been waiting by the phone, and they definitely have not tried to call...

Similar Messages

  • I have a Mac Pro tower with two internal Hard Discs, each one 2TB. I purchased a 3TB Time Capsule. But it does not allow me to back up because it says there is not enough back up space available. Between the two HDs there are 3.3TBs. Can I daisy chain TC?

    I have a Mac Pro tower (OSX version 10.6.3) with two internal Hard Drives, each one 2TB.
    I purchased a 3TB Time Capsule. But cannot back up because it tells me there is not enough space.
    I have more than 3Tbs to store to the new TC.
    Can I daisy chain two TCs to store the 4TBs?
    How can I back up only the internal HD that is already full, without backing up the other one?
    How can I do back up using Time Machine to back up the 3.5Tbs?
    Do I need to purchase another external HD (that is not TC) to be able to back up all of my photos?

    Can I daisy chain two TCs to store the 4TBs?
    No, you cannot link to produce a single large partition.
    But you can have two separate backup jobs.. and use each partition. That is hard on TM but you can easily get a different backup software for it.
    How can I back up only the internal HD that is already full, without backing up the other one?
    In TM you do a different setup and exclude the other drive.
    But it is better to use an alternative software IMHO.
    How can I do back up using Time Machine to back up the 3.5Tbs?
    You would need to use a network drive of more than 4TB .. it would also take forever. This is just wrong way to do it. Although you can buy a NAS that will work with Time Machine and load it with disks 16TB is possible.. if you can get a second mortgage.. the fragile nature of TM on 3rd party devices.. would leave me in cold sweat if anything went wrong.
    TM is excellent at keeping incremental backups of files that keep changing.. as such you should use TM to backup your OS disk and main user directory.. exclude all files and directories that never change. Back them up separately.
    Do I need to purchase another external HD (that is not TC) to be able to back up all of my photos?
    Yes, that is a much better idea. You want to store photos safely and you want to store them in multiple places. If you have multiple TB of photos, dedicate a couple of disks to the backup. ie have at least two copies.. not in backup format.. in straight copy format if possible.. so you can keep one of the disks offsite.
    I would be using your MacPro internal disk access, to place the disk onto sata bus and do the copy disk to disk direct. Or even buy esata card.. or sata to esata converter cable so you can use esata box. That will beat any other transfer speed except thunderbolt for which you would need third mortgage. (The MORT in mortgage is significant).
    The great jurist Sir Edward Coke, who lived from 1552 to 1634, has explained why the term mortgage comes from the Old French words mort, "dead," and gage, "pledge." It seemed to him that it had to do with the doubtfulness of whether or not the mortgagor will pay the debt.

  • My Mac Pro tower quad core crashed and is showing a NO sign (the circle with a slash through it). How do I safely get it to come back up ? Model A1186

    My Mac Pro tower quad core crashed and is showing a NO sign (the circle with a slash through it). How do I safely get it to come back up ? Model A1186

    General purpose Mac troubleshooting guide:
    Isolating issues in Mac OS X
    Creating a temporary user to isolate user-specific problems:
    Isolating an issue by using another user account
    Identifying resource hogs and other tips:
    Using Activity Monitor to read System Memory and determine how much RAM is being used
    Starting the computer in "safe mode":
    Mac OS X: What is Safe Boot, Safe Mode?
    To identify potential hardware problems:
    Apple Hardware Test
    General Mac maintenance:
    Tips to keep your Mac in top form
    Troubleshooting: My computer won't turn on
    https://support.apple.com/kb/TS1367
    Where are your bootable backups and clones stored?
    What do you have to boot from to restore or attempt to recovery files that are not backed up?
    It won't be a PowerMac. People tend to think they look alike? or mean the same thing.
    http://www.everymac.com/systems/apple/mac_pro/specs/mac-pro-quad-2.66-specs.html
    Try zap PRAM and SMC Reset. If you have ATI 5770 which many have upgraded to you won't be able to use older DVD or systems than 10.6.5

  • I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do?  How can I get the data off this disc?  I can see it has been already burned, so files are on there?

    I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do?  How can I get the data off this disc?  I can see it has been already burned, so files are on there?

    Try cleaning the lens and see if that will restore functionality to the DVD drive.  Use a DVD lens cleaning disk, if you have a can of compressed air, shoot some into the slot or wrap a fine microfiber cloth (eyeglasses cleaning cloth)  around a business card and insert it gently inside the slot.
    If no success, make an appointment at an Apple store genius bar and get a free diagnosis from them.
    Ciao.

  • My mac Pro Tower shows some green and reddish lines on the monitor and gives report of unresponsive processor

    My mac Pro Tower shows some green and reddish lines on the monitor and gives report of unresponsive processor

    And never heard of one case of AHT finding or reporting a real GPU related problem.
    It does sound like the graphic card and best way to know is to swap it out, even if you have a PC card around.

  • Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

    Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

    Hey briannagrace96,
    Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
    Try the iPod troubleshooting assistant:
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
    Restart the iPod Service
    Restart the Apple Mobile Device Service
    Empty your Temp directory and restart
    Verify that the Apple Mobile Device USB Driver is installed
    Change your iPod's drive letter
    Remove and reinstall iTunes
    Disable conflicting System Services and Startup Items
    Update, Reconfigure, Disable, or Remove Security Software
    Deleting damaged or incorrect registry keys
    Take care,
    David

  • Why my iPod (6th generation)not appearing in iTunes and all my songs are gone but the data is the same with last time when got songs.

    why my iPod (6th generation)not appearing in iTunes and all my songs are gone but the data is the same with last time when got songs.

    I understand that your iPod nano is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
    Apple - Support - iPod nano (6th generation) - iTunes Troubleshooting Assistant
    http://www.apple.com/support/ipodnano/6th_generation/assistant/itunes/
    If the above did not resolve your issue, choose an applicable article below that best describes your issue.
    Windows
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    Mac OS X
    iPod not recognized in iTunes and Mac Desktop
    MacBook and MacBook Air: iPod won't mount when connected via USB hub
    What to do if your computer won't recognize a USB or FireWire device
    Thanks,
    Matt M. 

  • I have burned a CD and the first 1/2 of the songs sound fine but the rest are not clear

    I have burned a CD and the first 1/2 of the songs sound fine but the rest are not clear, they have a skipping sound to them.  I have erased teh CD-RW and tried again and it was somewhat better but the last few songs did the same thing.

    Jennann,
    First of all, it is better to use CD-Rs than CD-RWs, as the latter often give problems when used for audio CDs.
    The problem you describe -- bad audio on the later tracks of an audio CD -- can almost always be corrected by doing the burn at a much lower burn speed. Use 2x.
    The burn speed is selected in the dialog box that comes up when you request the burn.  It defaults to "Maximum Possible," but there is a dropdown to select a lower value.

  • I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

    I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

    iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

  • My iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my prob

    Hello everyone my iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my problem please

    Hey Kirby17,
    Thanks for using Apple Support Communities.
    If you are not getting any sound from the speaker, follow this article.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved, please contact Apple Support.
    Have a nice day,
    Mario

  • HT1338 I connected a HDMI cord to my macbook from my TV and I mirrored it so I can see my macbook on my TV but the sound wont transfer to my TV, How can I do make this happen? PLZ help, Thank you

    I connected a HDMI cord to my macbook from my TV and I mirrored it so I can see my macbook on my TV but the sound wont transfer to my TV, How can I do make this happen? PLZ help, Thank you

    What model and year is your MacBook?  Some older MacBooks don't support Audio out via miniport/HDMI (the display miniport is video only).

  • My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds- Can anybody help? Has IOS7.0 but the most up-to-date version

    My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds… Can anybody help? Has IOS7.0 but not the most up-to-date version

    It's just the battery sign - nothing else. I've tried to reboot by holding down both power and home key for 10+ seconds, waiting for the apple logo - but nothing happens. It's plugged into the imac at the moment. I tried to recharge it overnight using the normal charger - but no luck. It went dead during a Skype call with a friend - even though it was powered into the mains - albeit at a low battery level at the time

  • ITunes updates songs, playlists, etc., but will not update iPod options

    When I plug in my iPod (4G, 40GB), everything syncs as it should --songs, playlists, podcasts, etc. The same is true when I manually choose to update the pod. (i.e. from a context menu or somewhere else in the UI) However, I am unable to change any of the options for the iPod. This includes renaming, choosing disk access, etc.
    When I attempt to make these changes from the "Preferences" dialog, iTunes will say "Updating iPod," etc. but while the changes appear in iTunes, they are not actually made on the iPod itself.
    A similar situation occurs when renaming the iPod. Same as before, iTunes "goes through the motions" but doesn't actually change. The difference is that after the iPod is renamed, it will no longer update until the iPod is ejected and reconnected. iTunes gives an error message saying: "The iPod '[New Name]' cannot be updated. The disk could not be read from or written to." The name listed in the iPod's About menu is still the old name.
    Info:
    iTunes version: 6.0.4.2 (Win)
    iPod firmware: 3.1.1
    iPod connected via firewire
    Gateway 500SE   Windows XP Pro   XP Pro SP2, P4 2.0Ghz, 1GB RAM

    iPod freezing up can sometimes indicate a hard drive failure. To determine this, follow these steps:
    Press menu + select until the apple logo appears.
    With the apple logo still on the screen, press and hold select + rewind. You will soon see a screen that says "IRAM PASS HIT PLAY CONTINUE".
    Press play/pause.
    Using the forward button, navigate to "HDD SCAN" and select it.
    Connect your iPod to the wall adapter.
    Allow sufficient time for the scan to complete, it can take a couple of hours. Results such as a "HDD PASS" that appears in seconds or a minute or two, "SCAN NG" or "RD FAIL" indicate the iPod's hard drive is pooched and the unit will have to be replaced.
    Freezing during sync can also happen if the ports are not high powered USB 2.0.

  • I recently bought an album and when I open it up, most of the songs play fine, but two of them will not play.

    I bought a whole album at once from a band, and when I try to play it, two song always skip over. I have never been able to get these songs to play correctly. I had decided that I was just going to buy the songs again instead of go throgh the trouble of fixing it but the album is no longer on iTunes. Thanks.

    Assuming you are in a region where you are allowed to redownload your past music purchases, the normal solution is to delete the problem tracks from your iTunes library, close and then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
    If the problem persists, or that facility is not yet available in your region, or you are concerned that tracks in question are no longer available in the store then contact the iTunes Store support staff through the "Report a problem" links in your account history, or via Contact Support.
    See also:
    HT5085 - iTunes in the Cloud and iTunes Match Availability
    HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
    tt2

  • I have a mac pro os 10.5.6 and need to get to 10.6 to use with I pad mini any ideas

    Hi I have a mac book pro os 10.5.8 and need to get to 10.6 or better to use my Ipad mini any ideas please. in advance thanks John.

    Hello,
    You need to purchase Snow Leopard disk from the Apple retail store.
    Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
    See minimum system requirement as well:
    Mac OS X v10.6 Snow Leopard - Technical Specifications

Maybe you are looking for

  • How do i set up mutliple devices with one apple id

    My wife and I have 2 i phones and now a new i pad, we share an apple ID from one computer, songs apps, contacts but have seperate email ect. Now she has a i pad and wants to be able to text from it using her cell, as it stand now if she sends a text

  • How can I Create a multilevel bulleted list in RH HTML 7?

    Hi! I'm trying to create a multilevel bulleted list in RH 7 (HTML) but keep messing it up. I can change the bullets and use some from the gallery, but when I indent to create a second level, bullets are the same. If I change bullets style, I change t

  • IPod Nano 7th Gen Charging Issues

    Over the past two days my nano charges to around 90-95% and then refuses to charge any further, also tried to connect to various usb chargers and computer usb ports. If anyone knows a solution to this its would greatly appreciated.

  • App crash

    I have one flex mobile application (however I'm not sure if this is not an Adobe AIR for Android bug) It works fine on Android without "word prediction activated" and also with "word prediction activated" an a device with 240 DPI however my applicati

  • Cant install from 10.6 to 10.6.2

    Hello. Im the owner of a MacBook 2.0Ghz Core 2 Duo with snow leopard 10.6 and im trying to update to 10.6.2 i downloaded the 10.6.2 and the 10.6.2 Combo in both i cant update in the installer window when i choose the Hard Drive i got the message sayi