TS1365 My Macbook Pro 17" 2.44ghz all of a sudden one day decided to not boot up. When the power button is pressed the sleep light in the front on the latch release turns on and there is a small running sound but it never boots up and the screen never lig

My Macbook Pro 17" 2.44ghz all of a sudden one day decided to not boot up. When the power button is pressed the sleep light in the front on the latch release turns on and there is a small running sound but it never boots up and the screen never lights up. Anyone else have this problem? Any ideas?
I'd love to repair it but not if it'll cost 500 bucks or more to replace the logicboard.
I appreciate any help
Michael

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

Similar Messages

  • My ipod touch shows up under devices, and it always used to sync right but all of a sudden one day it started saying "You're ipod could not be synced because the sync session failed to start" and now it's not syncing anymore. How do I fix this?

    My ipod touch shows up under devices, and it always used to sync right but all of a sudden one day it started saying "You're ipod could not be synced because the sync session failed to start" and now it's not syncing anymore. How do I fix this?

    See if this previous discussion helps.
    Sync Session Failed to Start iTouch iOS5: Apple Support Communities

  • Why does Satellite Pro A300 not start when the power button is pressed?

    Suddenly my new Satellite Pro A300 will not start correctly when the power button is pressed. The situation is this: When I press the power button the Toshiba opening picture (Leading Innovation) appears and disappers quickly. Then there is a black screen for about 30 seconds. Then there is a rectangular frame with the text Microsoft Corporation underneath. And nothing happens however long I wait.
    In order to get on with the starting proces I then shut down the computer by pressing down the power button until the computer stops. ("The hard way to shut down")
    Now I press the power button shortly to turn on the computer. Then the computer starts normally with the Toshiba opening picture and after a few seconds I am asked to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.
    What shall I do to get a normal start procedure?

    When notebook starts normally (after choosing normal mode) shut down your notebook properly using START > Shut down option. Next start should be normal.
    When the OS is switched down on irregular way you will be always asked how to start it again (safe or normal mode).
    The same happen on my Satellite A300.

  • I recently upgraded to Lion on an iMac and I am trying to run Garageband but get message telling me that the instrument library is invalid and I should choose a valid Instrument Folder or re-install Garageband. Where do I find such a folder?

    I recently upgraded to Lion on an iMac and I am trying to run Garageband but get message telling me that the instrument library is invalid and I should choose a valid Instrument Folder or re-install Garageband. Where do I find such a folder?

    Thanks very much. Yes, I am using the installer files and serial number from the URL you referenced above. I have spent many hours trying to get it to work. I would love some help!!
    The problem is that the instructions that come in the pdf with the downloaded files do not work, because the files that download from that page do not have the names referred to in the pdf, and most of the things that are referred to in the instructions do not happen. Here is what actually happened.
    When I downloaded the files from the website, these are the files that downloaded:
    I double-clicked each one and they extracted into two different folders.
    Then I read a message on the forum that said to move all the extractred files into the same folder, so I moved all files into one file at C:\Creative Suite CS2\Adobe Creative Suite 2.0 as was pictured in the forum message. Here are screen shots showing all of the files in that folder I have now:
    So then I double clicked the "Setup" file and I got this error message:
    So then I tried to install the programs separately from the installer inside the folders Photoshop and Illustrator. I got this far and entered the serial number from the website:
    But then I got this error message, even though I was using the files and serial number exactly from the website:
    I tried both photoshop and illustrator and the same thing happened.
    (I also looked at Solution 2 that you mentioned above but I don't have anything called VCOM on the computer. Also the error message that I got is not that one.)
    I think I really need a set of instructions that lists the steps in order to do, but based on the files that actually download from the website and what happens when you extract the files. I feel as if I have all of the proper files but it still doesn't work.
    Thank you very much!

  • Macbook Pro slowed down drastically all of a sudden, Beachball constantly there

    So, this morning I left my house playing a game of League of Legends and as soon as i got to work and tried to use my mac it seemed to have slowed down by 90%. Beachball there constantly as soon as I click finder, nothing loads for about 15seconds, beach ball continues swirling. Applications load up then if I hoover over one, beach ball appears again for 10 seconds. I have done a SMC Reset and PRAM reset and nothing has worked, I have killed the com.apple.finder.plist and it didn't help. Even when i go to top left Apple sign and click it, beach ball appears and I have to wait about 15seconds before the drop down bar appears.
    Ive had Maverick for a while and nothing happened, im on a 2.5GhZ i5 4GB Ram Macbook pro 13"
    It had first started when I used mail and i couldn't write because the text in a new email would only appear about 5 seconds after i typed it.
    Now for example if I try using Safari it gives the beach ball every time we change a website.
    I can't use any other apps, for example league of legends will simply not load.

    If you don't already have a current backup of all data on the startup drive, back up immediately. Then see below.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • My macbook pro became very slow all of a sudden?

    I just bought a used macbook pro early 2012. It was all restored and nice when I got it. It has worked perfectly for about a week and then I don't know why, but all of a sudden it became very slow in every aspect; Booting, opening apps, even surfing on the web became slower and laggy. It also seems like it has a battery problem when it is in standby. Because it uses a lot of power. Actually so much that it might go dead just by standing for a few hours. Is there anything I can do?

    In regards to the battery situation, try a SMC reset:
    http://support.apple.com/kb/HT3964
    Is there a change?
    When you got the MBP, was Mavericks the installed OSX?  What you may have to do is boot the MBP with the OPTION+COMMAND+R keys.  This will connect you to the Apple servers and allow you to erase the HDD and install the original OSX that the MBP came with.  This sets up the MBP to your Apple ID and will permit you to install any appropriate updates accordingly.  You may then download and install Mavericks from the App Store.
    Ciao.

  • HT4718 my macbook pro became ultra slow all of a sudden?please help

    Hi
    I have a macbookpro i bought in 2012 with following specifications
    Processor 2.9GHz Intel Core i7
    Memory 8 Gb 1600 MHz DDR3
    It became ULTRASLOW all of a sudden.I have not used even half of storage or disk space because I use it basically for internet surfing and doing my school work.Any help will be much appreciated.Thanks.

    Hello t@singh
    Check out the article below for your MacBook Pro running slow and slowing your productivity. Check Activity Monitor to see if your RAM is being used up and also check the hard drive using Disk Utility.
    OS X Lion: If your Mac runs slowly
    http://support.apple.com/kb/PH3915
    Using Activity Monitor to read System Memory and determine how much RAM is being used (OS X Mountain Lion and earlier)
    http://support.apple.com/kb/ht1342
    Regards,
    -Norm G.

  • The fan in my macbook pro is really loud all of a sudden, what should I do?

    A day or two ago, the fan in my MacBook Pro starting making a lot more noise...it kind of sounds like something is stuck in it? What can I do?

    Check Activity Monitor.
    http://support.apple.com/kb/TS1473
    Fans
    http://support.apple.com/kb/ht4543
    Reset SMC.
    http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does nothelp, contact Apple.
    Best.

  • My MacBook Pro, 15 inch, purchased in 2006 may have a virus or perhaps has crashed.  When I power it up, I get strange patterns.  Nothing else loads.  Is this a virus or has the hard drive crashed?  Thanks.

    When I power up my MacBook Pro, I get patterns.  Nothing loads.  Has my hard drive crashed or do I have a virus.  I had been burning a DVD from an iMovie project on an external hard drive when problems began.  Thanks for any insights.

    Sounds like the video card is going, mine did that after I installed the P.O.S . OS X called Lion.
    Was working fine under 10.6, little did I know that Cupertino was compromised at that time, likely the hackers corrupted the firmware updates.
    Take it in, they will run their little test and say it's the video card and it's not worth spending $350+ plus whatever else you need to fix it.
    Scrap it for parts and buy a new one.
    However, you can extract the hard drive and use a SATA to USB adpater cable to the new Mac, transfer files manually or use Migration/Setup Assistant.
    http://eshop.macsales.com/installvideos/
    you'll need a tool kit too.

  • Mac Pro switches itself off immediately after power button is pressed on

    Hi there,
    I would like to share with you an ongoing problem of my Mac Pro (about on and off 11 month I think). Since its HD changed at the beginning of this year I've been having the problem of "switching itself off immediately after the power button is pressed on." I took it to Milton Keynes Apple Shop and apparently they couldn't replicate the problem I received it after they reset it's PRAM. Meanwhile I read the related posts and discussions about the problem and my assumption was as suggested in the scenarios of similar cause – Power Supply unit. I had a technical chat with ex-Solutions staff from Brighton, he also said it might have been caused by it.
    I really don't know what to do because, sometimes attempting 10 or over times of pressing the button I hear the chime and literally 10 or 20 seconds later it switches itself off. And it happened this Sunday morning again, 8 times I've encountered the failure. And the most confusing thing is sometimes I leave it about an hour or two and then it just works and runs fine as it has never have happened.
    By the way I left my computer on for a very long time I suspect maybe more than a month it was on sleep most of time when i am not using it. But yesterday I made the mistake of logging off and shutting it down. Now I can't turn my computer on. Highly frustrating and amazingly bizarre technical challenge.
    Mind you I am fairly capable of carrying DIY operations on it. Previously I baked my graphics card as suggested in the forum – it works fine at the moment I am waiting until it completely brakes. But this power problem really really puzzles me.
    Any opinions, how to solve this cause is highly appreciated.
    Many thanks!
    Specs:
    Mac Pro 8 core
    Xeon 5400 2nd Generation Early 2008
    10 GB RAM
    1 TB HD

    The SMC especially on the very first 2-3 months of Early 2008.
    Use to suffer from a "restart on wake from sleep" issue.
    Some one told me that is not what "inrush current issue" is but that is what I (and couple others) called it.
    Best to always have a workstation on 1500VA UPS.
    Not share the outlet or cirucit even with anything major.
    Yes it could I guess, poor phrase, but put more stress on PSU over time as a result also.
    Methods to reset SMC have varied and changed over time. Thanks to web not all the revisions and older versions are kept online though to compare to.
    Stories of people going on vacation etc for two weeks to come back to a "dead" Mac Pro started showing up in 2007.
    If it had an actual SMC button, use that to reset.
    If not, leaving it totally disconnected, and all external cables and such over-night, not for the mere 5-10 minutes.
    Unplug but then press and hold power button for 8-10 seconds. And only once. And not to be done repeatedly. That was SMC Reset #3.
    I know the 2007 8-core 3GHz had a different PSU than the smaller models.
    2008 high end was 8-core 3.2GHz 5400 (stock was 2.8GHz 4 or 8-core)
    FBDIMMs draw between 10W up to 15W each, so possible to have 8 DIMMs drawing 120W when maxed out. And heat. I always recommend Mac Pro use fan control to boost the fans a small 400 rpm to expel heat better and keep FBDIMM temps down. Heat, and temperature fluxuations stress and weaken components.
    Other than AHT and the tools that a Apple Certified center should have, not much other than to swap out parts, monitor - iStatPro or Hardware Monitor -
    And because of all this, I would setup a test system so you have a freshly formatted and installed OS and take it from there, with a better chance.
    ATI 2600XT still? or upgraded?

  • Hi I have a Iphone4 in using. I couldn't find Safary, E-mail and notes from my phone one day. I made this mistake when I want to delete some programe from my phone. Who can help I recovery my phone please.

    Hi
    I have a Iphone4 in using. I couldn't find Safary, E-mail and notes from my phone one day. I made this mistake when I want to delete some programe from my phone. Who can help I recovery my phone please.
    Thanks

    Hello, HenryWang2103.
    Thank you for visiting Apple Support Communities.
    The Safari, Email and Notes applications are native to the iOS and is unable to be deleted.  Since this is the case, they are either in a folder on the iPhone, on another page or Restrictions are enabled.  You can also search for these Apps on the iPhone by touching the screen and sliding your finger down.  Here is some information regarding these features.  The information about folders is located in the user guide below.
    iPhone User Guide
    iOS: Understanding Restrictions (Parental Controls)
    http://support.apple.com/kb/HT4213
    Cheers,
    Jason H.

  • Got a new Macbook Pro itunes music was all there.  Suddenly it is not and my library is probably about 1/4 of what it was.....where did the music go and how do I get it back?

    Got a new Macbook Pro itunes music was all there.  Suddenly it is not and my library is probably about 1/4 of what it was.....where did the music go and how do I get it back?

    Hi there,
    You may find the article below helpful.
    No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967
    -Griff W.

  • I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

    I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
    I saw this report being sent to Apple:
    Interval Since Last Panic Report:  581719 sec
    Panics Since Last Report:          10
    Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
    Fri Mar  7 13:00:14 2014
    panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
    RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
    RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
    R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
    R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
    RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS:  0x0000000000000008, SS:  0x0000000000000010
    Error code: 0x0000000000000000
    Backtrace (CPU 0), Frame : Return Address
    0xffffff805e5f3a00 : 0xffffff8000204d15
    0xffffff805e5f3b00 : 0xffffff80002d1208
    0xffffff805e5f3c50 :
    Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
    Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
    Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
    Serial ATA Device: OPTIARC DVD RW AD-5970H
    USB Device: FaceTime HD Camera (Built-in), 0x05ac  (Apple Inc.), 0x8509, 0xfa200000 / 3
    USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 5
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x821a, 0xfa113000 / 8
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0245, 0xfa120000 / 4
    USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd110000 / 3

    Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
    There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
    If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
    Run Rember first... call back with results.
    Good luck,
    Clinton

  • HT4623 I trying to update my iPad using iTunes. After connecting to MacBook Pro where is installed all latest software iPad is recognised as iPad, Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error

    There was some updayts for my iPad 4 automatically downloaded. After installing it, the iPad began to restart itself every few minutes.
    I tryed to update my iPad using iTunes. After connecting to MacBook Pro, where is installed all latest software, iPad is recognised as "iPad", Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error occured (3). Tried many times, not results. And now iPad stays only in recovery mode, can't switch it off.  How can I solve this problem please?

    When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

  • Encore keeps crashing on startup on macbook pro. I have all the latest cc and osx updates

    encore keeps crashing on startup on macbook pro. I have all the latest cc and osx updates

    What specific OS and Encore versions? Since you say "latest OS updates," I assume Mavericks, and is this the relatively new 10.9.1 version?
    Where in the startup does it crash? Is there an error message?
    Mavericks causes a variety of issues, and we don't have enough data to really pin them down. At least with the original Mavericks, some users appeared to get CS6 to run with some serious but workable problems.
    Make sure you have handled any permissions issues.
    This describes such issues:
    Troubleshoot system errors and freezes | Adobe software on Mac OS 10.x
    http://kb2.adobe.com/cps/824/cpsid_82414.html

Maybe you are looking for

  • Need help optimizing the writing of a very large array and streaming it a file

    Hi, I have a very large array that I need to create and later write to a TDMS file. The array has 45 million entries, or 4.5x10^7 data points. These data points are of double format. The array is created by using a square pulse waveform generator and

  • 7-in-1 card reader not working - BIOS problem??

    A few weeks ago I updated the BIOS in my T400 [which caused boot problems which were resolved simply by disconnecting the clock battery for a fe minute]. Now the 7-in-1 card reader does not work.  I am not sure if this is because of the BIOS change b

  • Installed ok after reboot  apach problem

    Dear all hello I have installed 11.5.9 on win2k and it was ok but after reboot when it did not listen on 8000 port so i tried to inspect services and found oracle apacke server vis(instance name) is not started but when i try to start it, it says col

  • "Film Safe" and "Mark repeated frames" don't seem to work?

    Hi guys! I'm new to this forum and new to FCP Pro - though I'm not at all new to non-linear editing (Media100, Avid, etc.). A friend of mine is editing a feature film on a brand new G5 (dual) using a newly installed Final Cut Studio. Everything is wo

  • Cannot open powerpoint file after renaming it.

    Cannot open powerpoint file after I renamed it. I keep getting error messages -35 and -108. It says I have unknown access to the file now. What can I do?