TS1367 My MacBook turned on but is stuck on the white screen with the apple and the loading circle.

My MacBook turned on but is stuck on the white screen with the apple and the loading circle.

Hi there Mpontari,
I would recommend taking a look at the troubleshooting steps found in the article below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
-Griff W.

Similar Messages

MacBook will turn on to white screen with gray apple and loading bar, will load very little and then turn off. What do I do?

MacBook will turn on to white screen with gray apple and loading bar, will load very little and then turn off. What do I do?

Bescobar23,
which model MacBook do you have, and which version of OS X is installed on it?

HT4623 I tried to update my phone this morning, and now it is stuck on a black screen with an apple in the middle.

I tried to update my phone this morning, and now it is stuck on a black screen with an apple in the middle.

Press the Power button and hold it down until the computer turns off. Restart. Do you still get the same result? If so, then try booting into Safe Mode, then restart normally. A safe mode startup takes considerably longer than a normal one, so don't panic. You will also see a progress bar at the beginning.

IPhone 3GS stuck in a black screen with a cable and the iTunes logo in it. Extra bonus: error 1656.

So, I got this problem with the black screen with a cable and the iTunes logo in it. I tried restoring it, but in the middle of the process, the iPhone turns off (and it is still connected to the computer) and I get an error message (1656). I already tryed the solution that I have to find the "hosts" file, but there's no "gs.apple.com" line to be deleted.
What do I do?

I tried to do this at least 4 times! the iTunes is running the restore but at the end he's failed.. he say there is an error ! I think number -1.

I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please

I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please

Can you still boot to the Recovery partition using Command and R whilst booting? Or did you wipe the Recovery partition as well?
If your Recovery partition is still intact, you can simply boot to it and reinstall the OS via the Internet. If you wiped the Recovery partition, you can hold down Command, option and R keys whilst booting and boot into true Internet Recovery mode. You'll be able to reformat the hard drive, erasing all partitions (format it as "Mac OS Extended (Journaled)" with a dingle GUID partition) and then reinstall the OS that shipped with your machine.
Note that you should use a physical Ethernet connection when restoring over the Internet - it's three times slower if you use wifi.
Try your Recovery partition first and if that doesn't work, use Internet Recovery.
Clinton

Brand new MacBookPro 13" , Stuck at White Screen with gray apple and spinning gear.

Brand new MacBookPro 13" , Stuck at White Screen with gray apple and spinning gear.
This MBP apparently didn't come with a DVD and safe mode ( holding shift at boot up ) isn't working.
Any ideas would be most appreciated.

Call AppleCare. You should not be having problems with a brand-new machine.

HT4623 Tried updating to IOS 7. Now my phone is stuck on a white screen with two dots and two dashes.

Tried updating my iPhone 4S with IOS 7. It is now frozen on a white screen with two black dots and two black dashes. It will flip to another screen once in a while that says "Slide to setup." But when I do, it goes back to the screen with the dots and dashes.

What happened with your phone? I'm experiencing the same problems at the moment.

When i turn on my Mac book air I get a white screen with an apple and spinning pinwheel

Why won't my Mac book air turn on? I get a white screen with apple and spinning pinwheel.

If you wish help you are going to have to tell us more then that.
What version of OS X is your MBA running?
What did you change before this started?
Allan

Gut white screen with flashing apple and circle/warning sign on white screen when i turn on the computer

When i turn on my computer, i get only a white screen with a gray apples in the middle, flashing, alternating with a ghostbuster-type warning. Never get to the galaxy screen. Just happened today.

Did you setup a lock code? I have done this operation via iCloud just few minutes ago and it's booted with 4 numbers lock code just fine. When you lock your Mac, it's restarts automaticly and then loads with lock screen and you are only able to enter password of 4 numbers to unlock it.

Stuck at white screen with grey apple logo

When I turn on my MacBook Pro, it is stuck at the white screen with grey apple logo. What do I do?
Thank you!

I was looking at this and it helped! http://support.apple.com/kb/TS2570
1) Disconnect, test peripheral devices and network cables - didn't work
2) Perform a Safe Boot - didn't work
3) Reset the NVRAM / PRAM - worked, yay!

My macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on.

my macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on. i don't know how to get it to progress past this loading page.

Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you are not using Lion, Mountain Lion, or Mavericks then use the following procedure:
Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that.

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My macbook is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page what do i do?

My macbook Pro is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page with language select what do i do? Also i dont have enough monet to go to the apple store to get it fix and another thing this happen after i tried to factory reset it without the disck uising coomans i found on youtube.Lastly befor doing the comands my macbook would open any applications and the finder would just blink on and off on the dock.
Heres the link http://www.youtube.com/watch?v=Q5e5thk0O9o

Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Leopard - This will install a "fresh" copy Leopard without archiving old system files but leaves the rest of your files in place.
If you still want to restore your computer to factory level...
Start up from your install disc, go to Disk Utility and select the disk and click erase - to securely erase data click Security Options and Erase Free Space which will entirely wipe your disk, overwriting it with zeros so that no data is recoverable.
To restore read the instructions in the Mac OS X v10.5 Leopard - Installation and Setup Guide PDF

Macbook was frozen, did a hard shut down, when powered up it is stuck on a white screen with a rotating dial

macbook was frozen, did a hard shut down, when powered up it is stuck on a white screen with a rotating dial

Sounds like the 'white screen of death'.
Try rebooting your phone. Take the battery out for a few minutes then re-insert battery and see what happens. It may take some time to reboot. There have been numerous "fixs" for this problem, but until RIM come up with a definitive answer to stop it happening, then really theres nothing we can do except try some things. The battery pull has been offered on a few forums and some say it worked for them. Worth trying again.
You could always try THIS
but that seems a bit extreme, but may work if the reboot doest. Do you remove the battery whilst its still on? thats how you normally do a reboot. take batt out whilst powers on. Sorry if this doesnt help, but i know theres people all over the net that get this issue.

My iphone wont open, i even recovered it but to no avail, all it does is go to the white screen with the apple logo then turn off again

Hey everyone,
This morning i took my phone out of the charger and everything was normal however, once i got in the car i looked at my phone and realized it was turned off. I tried turning it on again as well but all it does is going to the start up screen (The white screen with the apple logo) and then it turns off again as well. I also put it on the charger but it does the same thing but repeatedly. So it just goes to the white screen and off again. At last i resorted to recovering my phone even if it meant losing all my data. Slow internet connection meant it took all night but in the morning i recovered and everything and got to the last step ( It told me its finished but i should leave my phone connected to itunes and it will pop up there) but all that popped up was an error screen. It still broken but now sometimes when i try to turn it on the same white screen with the logo comes on with a bar under it. this bar fills up a little then the screen goes black again. Is there any other way i can try to fix this?
P.S. There are no apple stores in my area so i took it to one of the phone stores here and even they said they couldnt do anything about it

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

TS1367 My MacBook turned on but is stuck on the white screen with the apple and the loading circle.

Similar Messages

Maybe you are looking for