TS1398 Hi since I have updated my IPad 3 which is about 4 months old to 6.0.1 I have now had it dropping my wifi if I connect to iTunes or anything on the net it's only been since I have updated everything else in my house works fine also my iPhone 4S he
Can any one help since I have updated my iPad 3 and iPhone 4S I know suffer with it loosing wifi and dropping only since I went to 6.0.1 I now find my self with two things that never now connect for more than a few minutes then I spend the next 10 trying to get it to connect
i was a lover of apple products and I was just about to get the iPhone 5 now I think I will go android or windows very disappointed in apple and there updates now left with to rather exspensive things that don't work
You need to update iTunes to 11.1 on your PC
Similar Messages
-
I spilled a small amount of wine on my macbook pro keyboard, I know, killing myself over this! I dried it fully but 24 hours later the keys are very sticky and it won't find the Bluetooth module so I can't use my magic mouse - everything else seems to be working fine. Thanks for any tips!
Your keyboard will never be right again; it needs to be replaced. There's no effective way to clean sticky stuff out of it. Your Bluetooth module may have been shorted out and destroyed, and it probably isn't dry yet after only 24 hours.
Take your machine in for repair, and expect a hefty bill in the hundreds of dollars. -
As per my headline comment, the wi-fi connection (which before IO6) worked fine now problematic, and iPhone in serious danger of flying out of the window..is there an option to get previous IOS back on the phone? I have tried the various "solutions" indicated in the chat forum but nothing helps..any ideas before I lose what little hair I have left?
If, as you suggest, you have iOS 6.0.2 installed in your 3GS, you shouldn't have. That OS is only for the iPhone 5 and Mini iPad.
Try rebooting the router. Any other devices working happily on it are irrelevent. -
since i got the new ios 5.1 on my i4 imessage doesnt work with other iphones, for example, my boyfriend send me and imessage and i get it as it email address and when i try to send him one, it goes as text!!, i dont understand.... this has been happened from both of us actualizated iphone to ios 5.1 ... and it has been changed constantly....
And yes, the Samsung has no issues on it's end. It sends, receives all regular sms texts from any phones that aren't using iMessage. Sorry, I didn't see your reply.
To update, I also just phoned Apple this morning, there's not much they could do at all. My personal opinion is that the number that was recycled (when I got it changed just very recently for the Android) must have somehow previously been linked to an pre-existing Apple ID. There was nothing they could do. They had me do numerous things that unfortunately had no successful results.
They even had me unregister my product from the Apple website, again, no success.
He did, however, say that there is an update going through beta testing at the moment that should, more than likely, have a patch in it for this particularily known issue since it's been an issue for awhile. So within a couple of months when it's released, I'm hoping this will fix it. I'm keeping my fingers crossed until then.
Turning iMessage off is the temporary solution that works for me. So I'm happy enough for that. Anyone else who would want to text her, would have to do the same. -
After updating to Mavericks, I can't open iTunes. I keep getting a pop up telling me iTunes needs to run in 64-bit mode. After following directions several times to go to Finder, iTunes, Get info and "unclick 32-bit mode" it still won't work and i keep getting the smae pop up window. I've rebooted several times also.
What version of iTunes do you have? The current version of iTunes for Mavericks is 11.1.5 and the default mode is 64 bit. If "Open in 32 bit mode" is checked and you cannot uncheck it are you logged on using an account with administrative priveleges?
-
my touch 1st gen won't work
everytime i connect it. it says This ipod cannot be used because the Apple Mobile Device Service is not started.
what do i do?The following document is worth a try with that one, carrie:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
I have no sound in Netflix, everything else seems to be working fine
Sound from all other functions working. Any ideas?
And, on a couple of occasions, I could not get it to play without unplugging and replugging the power.
This also happens sometimes with the 2nd-gen model. I just keep clicking the menu button on the remote every few seconds until I finally get a picture. I've never had to cycle power to resolve it. But sometimes it does take a while. Sometimes the power light even goes out (clicking the menu button turns it back on).
Definitely not elegant. Needs work. But it's "normal", not a problem with your unit. -
Have opened a page in WORD and tried to cut and paste to it. The result is that the page is frozen with the coloured cursor just spinning around and not letting me do anything with the page. I only wish to close the page down. Thanking you
Many thanks for your help in this instance. The command-option-shift-esc and force quit solved the problem for me . Now I can get back to using my computer once more
-
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I have an ipad2 and we purchased an HP office jet 6600. I can not connect to print. In searching the net, I have been advised to get the firmware update but can not find it. Can you advise?
Is the HP on the airprint list?
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
Cheers, Tom -
I have an iMac that I am running OSX 10.8.3 on. I keep trying to install 10.8.4 but it will not install. I tried updating and installing several times and it restarts the computer but it will not install the software. My machine is about 8 months old so, it's in the newish range. HELP!
Sometimes the App Store version doesn't work correctly. In this case, install 10.8.4 with the Combo version > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US
The Combo installer is the safest way to update OS X, and it allows you to update more than one computer with a single download -
When I open a pdf file on the net, I can only view page 1. How do I get to the other pages?
When I open a pdf file on the net, I can only view page 1 and cannot move to page 2, 3, etc. How can I change pages?
See [[Firefox keeps opening many tabs or windows]]
You can have infinite tabs opening if you have selected Firefox as the application to handle a file if you get an ''Open with'' download window.
Firefox should not be selected as the application to handle a file and you have to remove the action that is associated with that file type.
You can delete [http://kb.mozillazine.org/mimeTypes.rdf mimeTypes.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] to reset all actions or set that action in Tools > Options > Applications to 'Always Ask'.
See http://kb.mozillazine.org/File_types_and_download_actions ("File handling in Firefox 3 and SeaMonkey 2" and "Reset Download Actions") -
So why doesn't the new software upgrade the Apple TV to 1080hp...from the 720hp? Do I have to buy a new Apple TV to get that Upgrade? Mine is only about 2 months old! Very frustrating if thats the case!
If you want 1080, you will need to purchase the new Apple TV.
-
Help! MacBook won't connect to the Internet on my network. Never had an issue on other networks, other devices work fine, i.e. iPhone/iPad. Says it's connected. Plugged in Ethernet and tried other browser. Called ISP and all good on their end.
You can't change it - just try aagain.
https://discussions.apple.com/index.jspa
Where you find these options:
Notebooks
MacBook Pro
MacBook Air
iBook
MacBook
PowerBook -
some song will not play now on my 4s. it was since i updated software i think, cos it worked fine before that. it just skips songs. please talk me through step by step. i am going crazy. thanx guy's and gals of course
My situation is improving a little. When I returned home I found that my imac went to sleep during the match process (I would think that the process would keep the imac awake, but I recommend people with large libraries disable energy saving features while Match is working). When it completed the process the second time I tried, a LOT of the greyed out tracks returned to my iOS devices. The only ones missing right now are the ones pending upload to the cloud. I have a few tracks that I've purchased and are on my iMac HDD that are greyed out, but that list is down to 10-15 out of 12,000... so I can work on those when Match is done.
I'm surprised that the iOS devices would restrict you from accessing sync'd content while Match is running - i.e. the content is already on the device. However, it's error handling that must not currently exist in the service.
My biggest take away right now is the lack of information Apple provided on this service. I'm using third-party tutorials online instead of a simple "what is Match and how does it work" document from Apple... Documentation is still a must, especially for new and potentially complicated services like this. I.E. tell me that you are going to restrict my access to my own content during this process, and that this process may take 2-3 days (still uploading).
Maybe you are looking for
-
Most of my document is fine. However a few pages have a series of yes/no questions and the software is interpreting those questions as a list to check one from many. I need it to look at each line independently. How can I edit this form to fix thi
-
Freezes when exporting .mov files in CS4 / Adobe Media Encoder
For the past 7 hours now I have been trying every internet remedy for the following problem, and was wondering if any of you nice people could help: I just came back from a ski trip, and wanted to make an edit featuring my fiends. I recorded large pa
-
I've created DropZones in Motion 5.1.1. I worked with pictures as a placeholder and converted them (purple circle) into dropzones. I published the template as a generator into FCPX. As much as I could find out I should see the dropzones in the inspec
-
Lightroom loses files on a Network Attached Storage (NAS) drive
I am using Lightroom 5.7 on a PC in Windows 7 64-bit. A couple of weeks ago I installed a Network Attached Storage (NAS) system as I was running out of internal hard disk space. I set up a logical drive on the NAS for Photos. In Lightroom, I dragge
-
About disk quota in win2008r2 server(AD)
Hi,everyone: I have a question for help. In win2008r2 domain server, I want to set disk quota on each domain users. In default, when a user created, it belongs to Domain Users group, and disk quota applied. But if I add the user into Domain Adm