TS1398 I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc.

I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc. but no luck ...
In fact after updating the software to the latest version I am having more of this... Sometimes the wifi button freezes an I can't even slide it to on / off...
Thanks

Noooo! Actually I too had d same prob wit my iPhone 4S. When I connect to my wifi network it won't get connected or it wil be grey scaled! I took it to d istore and since I had warranty they replaced my IPhone. It iPad charger has high volt than ur iPhone charger so when u connect wit it, there is a chance where large amount of current passes thru ur iPhone. So for sure it wil damage ur motherboard and its parts! Many said that iOS 6 or 6.0.1 or 6.1 was d reason for tis wifi prob! But apple never made its mistake wit it's software. If and only if u hav hardware prob u wil hav these sort of wifi prob Bluetooth prob! So best way s to replace ur iPhone!

Similar Messages

  • I am having issues with my iphone6 bluetooth connection in my car.  When going to settings under bluetooth, it is unable to find any devices.  I did not have this issue until I downloaded IOS 8.0.2.  Do you know if there has been any resolution yet?

    I am having issues with my iphone6 Bluetooth connection in my 2013 Mercedes C Class.  When going to settings under Bluetooth, it is unable to find any devices.  I did not have this issue until I downloaded IOS 8.0.2.  Do you know if there has been any resolution from Apple yet?

    Hi susan from WSL, 
    Welcome to the Apple Support Communities!
    I understand that when your Bluetooth accessories, such as your car connection, do not work as expected it can be very frustrating. In this situation, I would recommend working through the troubleshooting steps provided in the attached article. 
    If you can’t use a Bluetooth accessory or car kit
    Cheers, 
    Joe

  • Just got my new iPad Air and noticed that the screen calibration is off. For example if I select the circle to place something there I have to select outside of the circle to make it happen. I did not have this issue on my previous iPad.

    Just got my new iPad Air and noticed that the screen calibration is off. For example if I select the circle to place something there I have to select outside of the circle to make it happen. I did not have this issue on my previous iPad.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    If no fix, Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • Ever since I upgraded to IOS 7 on my iPad, it does not remember my passwords, even though I check "keep me signed on".  Is there a setting somewhere that I am missing?  I did not have this issue with the previous OS.  Thank you.

    Ever since I upgraded to IOS 7 on my iPad2, it does not remember my passwords, even though I check "keep me signed on".  Is there a setting somewhere that I am missing?  I did not have this issue with the previous OS.  Thank you.

    Thank you, James, but I do have a WiFi connection on the iPad mini. The Numbers files update on my iPad third generation and iPhone just fine when connected to the same network.
    Do you have any other suggestions?
    Thank you!

  • I have v10.8.2 os on my mac. i use an external drive for backup which is on whenever the mac is on. whenever the mac wakes up i get the reminder that the drive was not properly ejected. i did not have this issue with snow leopard?

    since i have upgraded to mountain lion i get a popup whenever my system wakes up telling me that my external drive was not ejected properly. i did not have this issue with snowleopard. i leave my hard drive on and connected for use with time machine.

    Message was edited by: leroydouglas
    better yet, try this solution:
    https://discussions.apple.com/message/12351186#12351186

  • HT4628 I did the security update on 4-2-13 and now my airport card will not turn on. OS 10.6.8 Intel imac 4,1 core duo. My macbook pro did not have this issue and wifi here is working on that. Is there a setting that was changed? Thank you!

    Airport card will not turn on after security update yesterday. worked normally (for the download of the update) until then. Wifi here works fine with my Macbook Pro right now so the issue is with the card / computer / software not the provider. Did the update change something?
    OS 10.6.8 imac core duo.  The indicator is on the tool bar but is empty.

    Airport card will not turn on after security update yesterday. worked normally (for the download of the update) until then. Wifi here works fine with my Macbook Pro right now so the issue is with the card / computer / software not the provider. Did the update change something?
    OS 10.6.8 imac core duo.  The indicator is on the tool bar but is empty.

  • Lately, I'm unable to paste any image into the body of any email I compose. I did not have this issue before today. Please help.

    Could this issue with not being able to copy and paste any image within the email body, be virus or malware related?
    Though I don't think I have any virus problems. Also I have all the latest updates for Thunderbird.
    I read some suggestions posted elsewhere and tried those but none of these worked :
    DID NOT WORK #1 :
    (If your Thunderbird email message is displaying strange-looking code (tags) after each link, images are missing (it looks like images have been stripped out), and the font appears different, or bold, then you’ve most likely changed the message body view inadvertently. To switch it back, simply:
    Browse to View -> Message Body As -> and select Original HTML.)
    DID NOT WORK #2 :
    Email message looks fine, but doesn’t contain images
    If the rest of your Thunderbird email message looks okay, but is missing images, or they appear to have been stripped out, it’s very possible that you’ve changed a setting that won’t let attachments (ie. pictures) appear inline (within the message body). To change this back, simply:
    Browse to View -> and select Display Attachments Inline. )
    DID NOT WORK #3 :
    If you made the above changes to your Thunderbird settings and images still aren’t appearing in some of your messages, it may be that Thunderbird is blocking them because it thinks they are spam. To adjust your privacy settings and prevent the images from being stripped out, or not displaying at all (ie. being blocked), simply:
    Click on the button to the above right of the email message asking you whether you would like to load images.
    If the email message is from a trusted sender, you can click the link above the message specifying you would always like to load images in messages from this particular sender.
    DID NOT WORK #4 :
    If you’re still having troubles, or your changes aren’t being saved (ie. next time you open Thunderbird the images won’t display again) you can directly specify the default format Thunderbird should display email messages as in the config editor. To access it, simply:
    Browse to Tools -> Options -> Advanced tab -> Config Editor
    Search for mail.default_html_action and make sure it is set to 3 (allow original HTML). If you would like messages to open as text only (more secure, but you won’t see images, change the setting to 1).
    Could you please suggest what possibly has caused this issue? Thank you for your time.

    Thank you for your response.
    After searching around for any pointers to my problem, the above fixes I listed were the things that came closest to maybe addressing the issue, that I was able to locate. But since none worked, and as you pointed out, it is now clear they will only help towards viewing sent images rather than helping with inserting any images in the body of the email, which is the problem I suddenly started facing today.
    Coming to your suggestion, on opening the Write window, the Insert choice on the menu bar is indeed available. And I had already tried using that, by clicking on the '''Insert ----> Image''' option listed. That opens
    up the "Image Properties" box but using that has not resolved the matter either. It results in an image box getting inserted within the email but without the actual image itself.
    Plus, normally I am able to use the '''Paste''' function in the Edit menu or through right-click, but today the (Cut/Copy/Paste) functions have gone inactive, thereby disallowing me to use that to place an image within the email.

  • On my iMac, iMessage is only displaying the text of the person responding to me and not the text I am sending them. I do not have this issue with my iPad or iPhone, how do I fix this? It did work fine last week.

    I have read through some of the message boards and still can't seem to find this issue anywhere. Please help.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Using gmail - multiple copies of mail being written are forwarded to the trash -did not have this issue with 10.6.8 -

    I have two Imacs - the master one is plugged in directly into the modem, it runs with 10.6.8 and works fine (this computer is not connected to Icloud)- the other  is connected to a router which is connected to the master unit and the modem. that unit was upgraded to 10.9.4 and it is connected to Icloud - both Imacs use gmail accounts for e-mail.
    The "slave" unit running on 10.9.4 creates multiple copies of mail being written and sends those copies to the trash file. We have had up to fifty copies of one e-mail in the trash. That computer worked fine under OSX10.6.8 - We have visited the apple store genius bar with this Imac, and consulted the apple phone support service to no avail.
    while it does take a long time to transmit the e-mails, addressees get only one copy. Your help will be appreciated.
    Gerald

    9/16/14 update - another call to apple phone support revealed that this is a known issue that has no solution at this time.

  • Why will Macfee Virus not work with the new version? How do I swich back to the previous version that did not have this issue?

    I selected to let Firefox install the update. After the update was done. A message came up and stated the new version of Firefox does not support the add-ons for Macfee virus software. How do I switch back to the previous version, that does support Macfee virus software add-ons? In the mean time I will have to switch back to IE until this is resolved.

    Your Anti-virus application is not disabled, just one silly little McAfee extension for Firefox.
    See McAfee for an updated version of their Firefox extension.

  • TS1424 Another one of my e mail address appears in the App Store window and will not excepted my pass word my IPad works fine

    The problem is with my I Phone5

    Hi Joelira,
    For updating applications, if the other AppleID is showing, that means that those apps were purchased under that other ID, and they will be forever tied to that ID - regardless of what ID you have signed on to iTunes & App Store. Any time you try to update those apps, you will have to put in the password for the ID that they were originally purchased under.
    For purchasing new Apps, if you have the correct ID signed on under iTunes & Apps option on your iPhone, then it will come up with whatever ID you have signed on under that option whenever you purchase a new App.
    Cheers,
    GB

  • I have the new iOS 6.1.2 on my iPad.  My wifi connects to my home network but keeps dropping it and won't reconnect.  Did not have this problem with previous iOS.

    I have the new iOS 6.1.2 on my iPad.  My wifi connects to my home network but keeps dropping it and won't reconnect.  Did not have this problem with previous iOS.  Apple, you have a quality assurance issue.  Don't be like Microsoft where they send out pieces of junk with testing it.

    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • New Galaxy 5s.  Trying to connect to a guest wireless that routes browser to a login screen.  The wireless will not connect (gives authentication error), so will not pull up browser window.  My previous Android did not have this problem (it would connect

    New Galaxy 5s.  Trying to connect to a guest wireless that routes browser to a login screen.  The wireless will not connect (gives authentication error), so will not pull up browser window.  My previous Android did not have this problem (it would connect and immediately reroute to the login screeen).

    Would you please try manually set the DNS address on client NIC to the IP of your server, then try run the connector again?

  • I am trying to change the Apple ID on my I phone and my Wife's I phone.  Is it possible to keep our contacts, calander, and photos by doing this?  We do not care about our music or apps.  Is this possible?

    I am trying to change the Apple ID on my I phone and my Wife's I phone.  Is it possible to keep our contacts, calander, and photos by doing this?  We do not care about our music or apps.  Is this possible?

    Photos should be copied to the computer and synced back via iTunes.  They are unrelated to the Apple ID unless you are using PhotoStream.
    Depending on how the contacts are synced the the device, chaging the Apple ID may wipe them.
    Why do you want to change the Apple ID?  If it's an email address change, simply change the email associated with the Apple ID.  Do NOT create a new Apple ID.

  • TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library  it says There was an error opening the database for the

    Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library  it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

    Try starting Aperture with the command and option keys held down.  You'll get 3 options.
    Try each, starting at the top, in order, checking after each to see if it fixes the issue.

Maybe you are looking for

  • Error in Logic Editor

    Hi, I want to create transactions using Logic editor of SAP xMII. Whenever i click on 'Link' option it gives error saying 'Exception has been occured' null. Same is case when i work on existing transacttions. Can anyone please help me in resolving th

  • Streaming from a network location in KDE?

    Whenever I try to play something (video or audio) located on a local server, my Arch Linux (using KDE) is trying to download it first and then plays it. How can I make it stream instead of downloading? When I was using Ubuntu (using Gnome) whenever I

  • Acrobat 9 standard wont transfer to another computer

    Hello, I tried to transfer my Acrobat 9 Standard software to another computer and it failed. I deactivated the current install, went to the new computer and couldn't activate my copy. It says I have an invalid serial number. Any advice would be aweso

  • What happened to my battery??

    I just bought the new 15in PB about a month ago. Everything has been working fine until now. The battery only gives me 25 min of power. I calibrated the battery over and over. When I charge the battery, it one, charges way too fast, and two, for exam

  • Help with MacBook reimaging

    Hello, I have bought a MacBook and it has no OS on it. I've started in Internet recovery mode, made a partition but when I go to install OS X Lion I get an error saying my Apple ID hasn't purchase lion. I don't have the original OS X disk. Can any ad