TS1398 I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!
I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Similar Messages
-
The wireless symbol is present and indicates a strong signal, but I can not connect to the Internet. I'm on my home network and have never had trouble before. My iPad is current on all updates. I have tried to reset the network settings, nothing has worked. I can connect to the internet via my iPhone personal hotspot and all other wireless devices are operating normally on my home wireless network.
I am also having this issue. My boy just got an iPod 4 touch, upgraded to iOS 6. I have a D-Link DGL-4300 108G Wireless Gaming Router. With the iPod I can connect to the router, get an IP address (either DHCP or Static) and even browse through the menu on the router, but I can't connect to the internet.
With a DHCP IP address the iPod give the error "Not connected to the internet" with the static IP address it takes a long time when trying to connect to a website but then it gives the error "server stopped responding".
Clearly the issue is in some setting in the router. I've tried setting up a filter so that the iPod will always have access based on MAC address. I've tried changing the various wireless connection settings, all to no avail. I would greatly appreciate some guidence here. -
I connected my ipod touch 4g wi-fi with laptop ad hoc network....it's showing wi-fi signals but internet is not working...what is the problem in that can anyone help me...inadvances thanks
my laptop is Windows 7 and ip is this
192.168.102.12
255.255.255.0
192.168.102.1
DNS
192.168.254.2
192.168.254.3
in ipod touch 4g is DHCP and its showing
ip address 169.254.192.139
subnet mask 255.255.0.0.
remaining all blank -
Hi! I sold my Iphone on ebay. The seller wants to connect the Iphone with his Apple ID, but it did not work because it says that the Iphone is already connected with another Apple ID. How can I get rid of this old connection? What do I have to do?
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5661
MaggySimpson wrote:
Hi! I sold my Iphone on ebay.
Follow the instructions to remove a device you no longer have.
From here > http://support.apple.com/kb/PH13695?viewlocale=en_US -
I have tried to update my iPhone using the iTunes method but it will not work. The message "The iTunes update server could not be contacted. Please check your internet connection or try again later," appears. What do I do? The Internet is working fine.
Have you tried the following troubleshooting document?
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
If you end up using the If the iTunes Store opens successfully section of the document, and the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK. -
My machine is Top of the range (my Company builds them so it had better be :) )
Amd 1100t , 8gb ram , Windows 7 64 bit etc, etc...
The is not a hardware problem , but a software problem with FF...Any help would be appreciated as I hate using IE 8 for anything at all :( but I have to keep it on my machines just to run my remote security cameras at my Computer shop ???
Original question...as question length is limited ...not very bright that limit by the way :(
"My DVR security sofware that I access remotely uses a "dvr .ocx" file....when I try it in Firefox , either the latest non beta (3.6.1.5) or the new beta version (4.0 rc) it will NOT work as it says the plugin is missing... it works in IE 8 (unfortunately) but not IE9...
As I own a Computer company I am fairly computer literate but cannot find a plugin that allows this to work in Firefox.... but I would have expected it to work in the new Firefox :(
All the best, Brett :)The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is. -
I'm trying to add album art to a CD I imported but it will not work. The album art will add to other albums but it won't show on the album. The CD is imported from Japan, didn't think that would be a problem. Does anyone know a solution?
Vanguard,
You are welcome. As I gather you have now figured out, any of the other formats (AAC, MP3, AIFF, or Apple Lossless) can handle artwork just fine.
Enjoy the music!
Ed -
My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!
See this article:
http://support.apple.com/kb/ht3964
Find the section that applies to your computer, and follow the instructions.
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC. -
ipad screen will not slide. Tried resetting and a factory reset but still will not work.
I have the same issue on my Ipad Air. Screen will not rotate, I have reset the settings, still only displays in the portrait mode. A couple of interesting things though. a couple of days before it completely locked up into portrait I would have to turn the ipad off and hold it in the orientation I wanted because it would not change orientation after I was in an app.
Also, I just played a Netflix video and it was in landscape mode.
Any ideas?
Thanks, -
I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton -
I installed Snow Leopard, upgraded it to OS X 10.6.8, paid for and spent the hours necessary to download Lion, but Lion will not install. Even though it says the requirements are 10.6.6 or greater, when I try to install, I get a message saying I need 10.7. to install Lion. What should I do?
Hi..
Make sure your Mac meets Lion's requirements.
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OSX v10.6.6 or later (V10.6.8 recommended)
7GB of available spare
From here > Apple - OS X Lion - Technical specifications
If your Mac meets the requirements, installing the Mac OS X 10.6.8 Update Combo reinstalls the App Store for you which may help.
Restart your Mac after instaling the combo installed. It's ok to do this even though you are already running v10.6.8.
If you have anti virus software installed, you may need to disable that in order to install Lion. -
Hi
When I sync my new iphone 4s to my mac book everything moves across apart from my contacts, I have cleared the phone and started again but it will not work.Hello Grant - -Thanks - -
I notice you are west of Boston - -we in Medford and son goes to Tufts in town
(small world)
Not really certain what you are telling us - - I am not good at computers
A couple of other things that may be tips - -
1 - on wednesday of this week
our son noticed the fan was going on almost continuosly,
After that trouble started - -
2. - When we put the new HD in - -same things happened,
which is ? mark in folder (start-up items)
3. - His computer will not see my wireless even if I put it next to my I-mac
It sees several networks but not mine - -and if we type in my netwokr
info - -it will not take. He wanted to try a network start-up .
I forget how that is done.
4, - The bottom of the computer is getting hot - -much hotter than i think it should.
any ideas why his computer won't see my router?
I think he may just have to take it to Apple Store on Newbury Street.
Would they be able to get his info off the old HD assuming it is still good and
transfer to the new HD fairly easy.
LAstly - - I am pretty certain I have the str-up disks for my I-mac which is running
10.5.8.
Would I be able to do anything with my computer and hook into his computer
into mine like an external device or something like that
I really appreciate your thoughts and efforts on this and must admit I have no
external enclosrure? but I have an external HD on my I-mac
As you can tell - -I am not to good at this
Thanks from Meffa (lol0 Jim the father -
I bought the external DVD player/burner for my Macbook. I tried using it with my Dell laptop but it will not work. Is it not configured to work with anything but apple operating systems?
If you purchased the Apple USB SuperDrive, it will only work with select Apple devices. It won't work, for example, on my Late 2011 model that has a SuperDrive built-in, but it will work with an Air, Retina model, new 'drive-less' iMacs, etc.
As far as I know, though, you can only hack the drive to work with some other Apple devices, but not with Windows PCs. Which is a shame as other, less expensive DVD/CD devices will work with just about any machine.
Sorry,
Clinton -
My computer has stopped recieving charge. The charger is in great condition, but it will not register, nor charge my computer. I do not know if its my mac or the charger. Is there any way to fix this?
Do you have another charger to test with?
It is very possible that somehow the wire might have gotten bent without your knowledge and that is why it is not working.
If you have an Apple store near you, you might want to set up a genius appointment so that they can test it for you. -
I am trying to connect my old mac desktop and my mac book pro to my new mac desktop to use as monitor but it will not work??
Hi ashleydanc588,
If you are interested in more information on using an iMac in Target Display Mode, including what machines are compatible, you may find the following article helpful:
Target Display Mode: Frequently Asked Questions (FAQ)
http://support.apple.com/kb/ht3924
Regards,
- Brenden
Maybe you are looking for
-
Query to find out the free disk space on C: drive
Hi Guys, I am trying to create a query in Queries section under Monitoring, To find out the free disk space of C: drive. Am using the below query, but it shows lot many fields, I need only Machine names of the collection and their Free Disk Space on
-
How to abstract colums from persistable class(s)
for example, i have some common column (created, modified, etc) for all tables and i don't want to mape the common columns in every single class. i know kodo has the following restriction in Inheritance "If a persistent class inherits from a non-pers
-
HTML in SOME (not all) tweets and emails
Sometimes my HTML emails and tweets come thru with all the HTML coding. Why? . Here is a sample on a tweet.... <html>Bleus. Denim. UNTTLD. <a style='font-weight:normal;color:rgb(36, 119, 179);' href="#SMM">#SMM</a> <a style='font-weight:normal;color:
-
Bootcamp missing after resizing manually
I know i have seen many threads, discussions about this kind of problem. Sorry if this is posted in here if its the wrong place I mean. Well I did some reading and wasnt so sure about going further than what I've seen was successful for others (scare
-
Change symbolic link to something else
Hi everybody. this is what i have: Using the "lndir" command in terminal I have a folder full of symbolic links to an external hard drive that is now unconnected. I want to be able to have spotlight index/search this folder so that if there is someth