TS1398 I just reset my new router name and password and my iPad keeps picking up the old name using the old password. How do I purge the old info and get it to look for the new name?
I installed a new wireless router and connected with my iPad. I then changed the ID and password with ethernet but now my iPad keeps picking up the old router name and password and doesn't see the new name. How can I get it to stop looking for the old name and find the new one?
Hello Stevo39,
If your iPhone continues to prompt for your old account and password then check out the following article.
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
This article may help too.
Apple ID: What to do after you change your Apple ID - Apple Support
Regards,
Nubz
Similar Messages
-
Getting best possible look for the web!
I am using Compressor for compressing my footage for the web. When I export out of FCP my footage looks nice and crystal clear however when I compress the footage then upload to the net its not as nice looking as it was. Now I recently bought a Compressor DVD Tutorial by Ripple Training Series. I pretty much knew just about everything on that DVD. I did try some suggestive settings that have made somewhat of a difference but its not crystal clear like many videos I see uploaded to DVXuser. The settings below might be okay it might just be the hosting site I have my videos on. Currently I am using www.sharkle.com
Here are some settings I use:
Compression Type - Sorenson Video 3
Frame Rate 15
Key Frame Every 75 frames
Quality - Medium
Restrict Data to 400kbps (this is for DSL modems) around 1500 for cable modems
Audio
Q Design Music 2
Channels = Stereo
Sample Rate = 48k
Streaming = Fast Start
Geometry
320x240
If anyone sees anything that I should change or try out differently please let me know. Again I am using Compressor and can also compress using Quicktime as well.
Here is a link to the latest video I completed for the web:
http://www.sharkle.com/video/78755/
I am not sure if SHARKLE is recompressing the footage. If it is then thats why its not as good of quality.Their making a FLV file from your sent in video.
Push your video back up to a high quality movie and send that in to them.
What you have sent in has all been squeezed highly with compression. Then they take and further compress it in the FLV format. Double compressing...not good. -
How to look for the Table Name
Hi Friends,
Sometimes we need to download the table for the desired information if the same is not available from a particular report. How to look for the table name? Is there a report or a particular feild, where we can find the name of the particular table?
Thanks for the assistance.
RegardsHi Friend,
If you want to see the structures then go to SE11. Sometimes it happens that you cannot find the table names but only fields. In such case, if you want to find the Table names which is not available, then go to SE90.
Abap Dictionary > Fields > Table Fields.
Now Enter the Field name in Right Hand Side of the screen then Execute. You will see the all tables by which that Fields are used.
Regards,
Jigar -
complaint regarding service
I'm looking for the name of a complaint department manager
Apple Customer CareWelcome to the Apple Community.
This is a user to user community, Apple are unlikely to read your comments, if you need support then you will need to contact them through Express Lane (select your country, navigate to iiTunes help and enter the serial number of one of your devices) -
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
TS2776 I cannot get my IPhone to recognize my new computer; it's still looking for the old one.
My IPhone won't sync with a new windows 8 computer. It's still looking for the old one. How in the he11 do you change the name of the PC the IPhone looks for?
This user tip should be useful
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
Need help to open and look for file by name
Hi,
Im needing help to open a folder and look for a file (.txt) on this directory by his name ... The user ll type the partial name of file , and i need look for this file on the folder , and delete it ....
How can i look for the file by his name ?
Thx =)Hi ,
Sry ,, let me explain again ... I ll set the name of the files in the follow order ... Name_Serial_date_chanel.sxc ..
The user ll type the serial that he wants delete ...
I already figured out what i need guys .. thx for the help ^^
I used List Directory on advanced IO , to list all .. the Name is the same for all ... then i used Name_ concateneted with Serial(typed)* .. this command serial* ll list all serials equal the typed , in my case , ll exist only one , cuz its a count this serial .Then i pass the path to the delete , and its done !
Thx ^^ -
Looking for a new laptop, I work in finance. Air book or the macro with retina?
Looking for a new notebook. I work in finance and travel. Is the Mac Pro with Retina worth the extra weight or should I go with a Air book?
Welcome to Apple Support Communities
The MacBook Pro with Retina display is worth, but it's limited. Note that you can't upgrade anything after buying it without voiding the warranty. The same happens with the MacBook Air.
Simply, if you have to run heavy applications, buy the MacBook Pro with Retina display. If not, buy the MacBook Air -
I've done all of these recommended steps. My problem is that I have a new laptop that I am trying to sync my iPhone (and iPad for that matter) via Wi-Fi but both devices are looking for the old laptop to sync. My iTunes is version 11.0..3.42, iPhone is 6.1.4, and iPad 6.1.3. Any suggestions?
All I had to do was complain. I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store. I have no idea why.
-
Just got a new MacMini. Migrated files using Time Machine. However, now, on Launchpad, I see several Firmware updates that were relevant for the old machine, but not for the new one. How do I get rid of these updates? They won't delete!
Only thing I can think of is trying this Lion trick...
http://www.cultofmac.com/106030/how-to-nuke-lions-launchpad-and-start-over/10603 0/ -
I work in a High School and I am looking for a new library system that runs on the mac and is not windows based, can anyone recommend anything?
That's a very broad question and difficult to answer without knowing more about you requirements.
Try starting on this page Category review: library management software for the Mac |Part I and part II to get a starting point.
regards -
Looking for a new system working with the adobe creative suite
Hello everybody,
i was 6 years happy with my asus notebook series x55s for what I paid around 1000 €.
I worked until CS5 with it but now it is getting a little slow and I am looking for a new system.
I am considering buying an Imac such as
http://store.apple.com/us/product/FC814LL/A/refurbished-imac-27-inch-31ghz-quad-core-intel -core-i5
but I never bought an apple computer, I am just used to edit on one from work and school
or
buying an Asus Laptop again (f.g. the Asus N56VM)
http://www.cnet.com/laptops/asus-n56vm-ab71-15/4505-3121_7-35544410.html which I found for around 900€
and a screen with 27 inch such as the Samsung Sync Master P2770 (around 250€)
I am mostly editing Full HD material from the Ex1 and DSLR on premiere CS5 and 6.
Since I am not that technically expert I would like to have some opinions/ suggestions of you regarding
my thoughts.
I would like to spent up to 1600 €.
Thank you so much!
NadjaLaptop Video Editing PC
-http://forums.adobe.com/message/4717373
-http://forums.adobe.com/message/4578948
Also read http://forums.adobe.com/thread/1281294 -
whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help
Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC. -
I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer
Mike wrote:
> Could someone tell me why this prototype-based lightbox
seems to work on one
> of my sites but not on the other?
>
> I literally took the exact same .js & css files,
copied them over from one
> site to the other, but it's only partially working on
the new site.
>
> Works :
>
http://www.roxanacampagiorni.com/
>
> Doesn't work :
>
http://www.vilverset.com/sample.html
>
> Been troubleshooting this one for days, and I'm stumped.
Script wants
> nothing to do with lightboxing HTML files on the new
site. Only straight
> JPGs. But it was written to work with them, and it
*does* work with them
> just fine on the *other* site.
>
> Where is the anomaly between the two sites that's
causing it to break in
> sample.html?
>
>
Not sure if this is relevant but on the page that works you
have these
js files linked - 4.....
<script type="text/javascript"
src="/scripts/jscripts.js"></script>
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
and on the page that doesn't - 3......
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
HTT
chin chin
Sinclair -
I am looking for software to store photos with. I am not a fancy photographer, and really am just looking for the digital version of a photo album. iPhoto is not cutting it, mainly because it does not back up and restore easily on an external HD.
That's how Time Machine and iPhoto now work. Restore the library to one of the external HDs, check it for the photos you want, export them to the boot drive and delete the restored library.
If you know the file name of the photo you're looking for you can search for them in the TM backup using Find Any File.
My workflow allows me to do that:
1 - upload new photos to a folder on the Desktop.
2 - name the folder to represent the contents and date: 01/03/10-Toads Bday
3 - use a file renaming app to sequentially rename the photos in the folder to: 2010-01-03-Toads Bday-001.JPG, -002,JPG, -003.JPG, etc.
4 - import the folder into iPhoto creating an Event with the same title as the folder.
Now I can search for those file by file name with any app of my choosing.
Maybe you are looking for
-
How do you stop pictures from going into different rolls?
Everytime I transfer a picture into iPhoto it goes into a different roll. When it comes to finding these pictures, it can take a long time. Can anyone tell me how to make pictures all go to the same place?
-
Why can't I find my external hard drive on Airport Extreme?
I have recently moved into a different home and set up the internet through Airport Extreme that works fine. However, I can not find the external hard drive plugged in to the Airport USB which used to show up in Macintosh HD under Devices. I have u
-
Show and Share with IE8 and Windows 7 64bit
So we are running 5.2.1, and we create a live event. We have a Windows 7 64bit machine running IE8 in 32-bit mode. Everything appears to start fine, the video plays, we get audio, slides load, the different frames pop up etc etc. However, after a tim
-
Hi, my facebook app on my Ipad3 has stopped allowing me to put comments on. Does anyone have any ideas how to correct this? Don't know if it is a problem with the Ipad or just the facebook app. Thanks.
-
Problem with h:selectOneListBox
I ve got an arrayList private List tempData=new ArrayList(); 'tempData' contains a list of company names eg :-BAN~Bank of America,TCS~Tata Consultancy Services etc etc.Now my jsf page contains h:selectOneListBox <h:selectOneListBox id="cmpny" value="