TS1398 my iphone 4s can not scan any wifi network, i tried everything but still can not scan any wifi connection even though our wifi is working properly in our mac book and ipad. What do i need to do if the problem is the hardware?pls help
my iphone 4s can not scan any wifi network, i tried everything but still can not scan any wifi connection even though our wifi is working properly in our mac book and ipad. What do i need to do if the problem is the hardware?pls help
When you say it "can not scan any wifi network" do you mean it is not detecting Wi-Fi networks?
Is Wi-Fi turned on in Settings > General > Wi-Fi?
Have you tried Settings > General > Reset > Reset Network Settings?
Is it just the home network that the device will not connect to? or any network?
Similar Messages
-
I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?
so i'm using the usb mouseI want to clarify the issue.
The issue is with the MBP trackpad, and it works fine with an attached USB mouse.
With some ingenuity, you might be able to fix this yourself, but I suggest visiting your local Apple Store/Genius Bar. Some have fixed this issue and have posted their results online, but the Apple Store should be your first destination.
Post here with your results!! -
I've tried everything but still can not! get rid of Babylon. Has anyone found a long term or permanent solution? I've tired uninstalling and reinstalling FF, done the about:config which also hasn't worked. I've deleted everything to go with this stupid search engine but still it reappears. It's just ridiculous. Please help!!! I don't really want to use another web browser
Did you check these?
*[[/questions/935739]] and [[/questions/935739#answer-367152]]
*[[/questions/923451]]
*http://support.babylon.com/index.php?/Knowledgebase/List/Index/48/english-faq
*http://support.babylon.com/index.php?/Knowledgebase/List/Index/37/installation--technical-support -
i have deleted all contacts in icloud but still have them on my iphone (which is backed up as well to iTunes) how can i restore the iphone data to the iCloud so it will resend it to my mac book and iPad? I have switched my iphone to airplane mode so it is not connected to the internet and so icloud can not wipe it at the moment.
thanks royThere's a menu choice (I think under "Files") that lets you sync purchased items on a device back to itunes. Look for that.
iCloud does not store music. If you want to do that you'd have to subscribe to itunes Match, but to get music to the match servers, you need the music in the itunes library on your computer. -
How can I remove iCloud from my Mac Book and iPad and Mac Book Air and then just reload back on the MB Air and iPad only, which have a different user with a separate Apple ID?
You have quite muddied up the waters, I'm afraid. Assuming you now have a single GUID partition formatted Mac OS Extended, Journaled, you should try reinstalling Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.
Again without stating the trouble shooting steps you have taken, its hard to direct you with any information.
Try a different port on the computer.
Does the iphone beep when u plug it up. ?
Plug iphone into computer and give it 3 to 4 minutes to see if it connects and is running slow.,
Delete the apple mobile device from your computer.
Upgrade itunes to newest version.
Is you USB cord defective ?
Any USB 3.0 on your system ? .
Delete or Disable any antivirus program on your computer ?
I will tell u the problem is your computer not the phone.
We could do this for hours. -
TS3899 I have done everything but still can't get email on my iPad or iPhone ! What shall I do now?
I have done everything but still can't get email on my iPad or iPhone ! What shall I do now?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
I'm trying to update to the latest software update 5.0, but won't let me do it. I have done a restore and tried again but still no luck. Any advice?
The Original update for Apple TV was to 4.4 then a bugfix appeared called 4.4.1 Both of these have issues so Apple Pulled them and currently 4.3 is the current version for Apple TV IOS. In fact there are a number of comments in other threads where people carried out the upgrades only to restore back down to 4.3 because they did not work. Guess we will wait for Apple to send out an update.
-
I have an older plug in version of Airport Express and am trying to connect it to my wifi network to boost coverage but it is not connecting to my network.
What is the make & model of the wireless router that you are trying to "boost" with the AirPort Express? Is your Express an 802.11g or 802.11n model? Is the connection between routers going to be a wired or wireless one?
-
My iphone wont change my old mail address, Iv'e tried everything, so i cant update anything, any solutions?
Why won't it? What specifically are you attempting to accomplish here?
iPhones do not change email addresses, the user sets up an email account(s) on the device.
Are you possibly referring to the Apple ID used on the device? -
I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!
I am also providing you with a screenshot of what appears! I need photos on my iPad2
Message was edited by: anganaYou don't see it on the left-hand side of iTunes - you need to connect and select the iPad on the left-hand side, and then one of the tabs on the right-hand side that you use to select which content to sync to the iPad should be Photos : http://support.apple.com/kb/HT4236
You will need to select and sync all the photos that you want on the iPad together in one go as only the most recent sync remains on the iPad, not including photos in a subsequent sync is how you delete them from it. -
I'm trying to extend my wifi network with time capsule but it can't find the existing wifi network
I'm trying to extend my wifi network with time capsule but it can't find the existing BT wifi network even though it is there with a good signal strength. The Time Capsule is connected to a Netgear router via ethernet.
You will need to start over on the setup of the Time Capsule as follows:
Disconnect any Ethernet cables that might be connected to the Time Capsule, but leave it powered on
Hold in the reset button on the back of the Time Capsule for 8-10 seconds and release. The reset button is located next to the AC power socket.
Allow a full minute for the Time Capsule to restart to a slow, blinking amber light
Connect the Ethernet cable from a LAN <--> port on the Netgear to the WAN "O" port on the Time Capsule. The Ethernet cable must remain connected at all times.
Click the WiFi icon at the top of the Mac's screen
Look for a setting of New AirPort Base Station
Click on Time Capsule
The example below shows an AirPort Express. You will see Time Capsule on your screen.
That will get the setup wizard going. It will take a minute to analyze the settings, then display a screen that looks like this, except you will see a picture of the Time Capsule
Network Name..........Type in the exact name that the Netgear wireless is using
Base Station.............Type in a name that you want to call the Time Capsule. Use something short and simple. Mine is TC, for example
Password..................Type in the exact password that the Netgear wireless requires
Verify.........................Verify the Password again
Click Next
The setup wizard will configure everything for you automatically. When you see the message of Setup Complete, click Done.
That's it. Now you have one big "extended" network. Technically, this is called a "roaming" network. -
My ipod touch is not working i tried everything but i cannot turn it on. I was not using for about 2 weeks and I remember the last time I used it it was working perfectly but a day before today I tried to turn it on but i couldn't I tried by pressing both bottoms but my ipod does not respond ! I really need help !
See Here for
Frozen or unresponsive iPod touch
Make sure the Battery is Charged...
Also, Try This... You will Not Lose Any Data...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the iPod On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
Bought a 65" Samsumng and Xbox --- What do I need for a receiver to hook into the speaker system ?
I have the Geek squad coming in to install in a week andwant to have them hook the built in speakers in the room . What type of receiver is needed to work with HDTV, Cable, and the XBOX one ?
Any experience on this ? The speakers currently have wired connections to a stereo system.Any home theater system and or receiver that has HDMI will be sufficient.
However, I would strongly suggest going into your store and asking a sales rep directly.
You don't even need a receiver that has HDMI for that matter.
If your not going for surround sound but just 2 external speakers you don't need much.
You can have them hook up an AV receiver so that you use the receivers remote to switch between inputs. i.e. Xbox, Cable Box etc.
I have my sytem set up so all audio and video feeds into the TV iteself. then the audio out is the only input into the receiver. I then leave my receiver on the same input and just change the input on the TV. i.e. Xbox is input 4, BlueRay is input 5, TIVO is input 6 and external HDMI to my computer is input 1
Either way works fine, I simply prefer to have all inputs going to the TV.
If your just going to a 2 speaker setup you will want to look at 2.0 channel receivers. Either of these should work fine.
Sony - 200W 2.0-Ch. Stereo Receiver
Model: STRDH130
SKU: 4550834
Yamaha - 200W 2.0-Ch. Stereo Receiver
Model: R-S201BL -
IPhone 5 is unable to discover bluetooth enabled devices Mac Book and iPad
My new iPhone 5 is unable to discover bluetooth enabled Macbook and iPad sitiing next to it
That's not a feature of the iPhone. The only thing you can use bluetooth for with a computer is tethering.
Maybe you are looking for
-
I need the drivers of EDR Enhanced for LabVIEW 8.6 or more, please.
Hello, I want to acquire a signal with the microDAQ-Lite of EAGLE Technology and I need the EDR Enhanced LabView Driver. The one I have is for labview 6.x or 7. Currently I am working in Labview 2010 so I am needing the drivers for this version. I h
-
Urgent : Auto Clear Down Pyament with Vendor IV and Customer Billing
Dear friends, I have problem about how to set the vendor invoice clear with down payment agianst PO automatically. BTW, customer billing how could be cleared automatically with down payment please give me suggesstion. Thank for all of your help.
-
I recently moved from an iPhone 4 to and iPhone 4S. This was a disaster, when after 2 weeks, the earpiece lost its sound. I went online and found many rehabilitative posts, none of which worked and finally reset the phone and restored (a very long
-
Hi All, Till IE 6 I used to render the IE in my JAVA swing frame through the technique IECanvas , but now IE 7 has hit the market and IECanvas is not able to render the IE in JAVA frame ... Could any one please suggest me some link, tutorial, etc on
-
Hello. How i can add my own SSL certificate to windows phone 8? I'm using proxy for testing apps, and without my own certificate i can not connect to internet. a