TS1406 having problems installing itunes on computer so I can sysc with iphone.  had to download only then installed itunes.  getting error trying to install AppleMobileDevice64.

having problems installing itunes on computer so I can sysc with iphone.  had to download only then installed itunes.  getting error trying to install AppleMobileDevice64.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Mobile Device Support entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Similar Messages

  • Getting Error trying to install Cisco Prime Optical 9.6

    Good Morning all,
    I am having no luck trying to install CPO 9.6.  I am trying to install on a Red Hat LINUX 5 machine.  Install get to the pre-install checklist then fails on the oracle check, then exits the install.  Here is what the error log shows.
    Oracle Pre Installation Checks: for Linux
    Check Minimum value of RAM allowed to install Oracle
      Actual size value of RAM is 48304932 Kb that is sufficient to Install Oracle
    Check the correct tmp size for Linux to install Oracle
      Actual tmp size is 238785284 Kb that is sufficient to install Oracle
    Check the correct oracle base disk size for Linux to install Oracle
      Actual disk size for oracle base is 238785292 Kb that is sufficient to install Oracle
    Check the correct OS version for Linux to install Oracle
      Actual OS Version for Linux is Red Hat Enterprise Linux Server release 5 that is correct
    Check the correct OS patches for Linux to install Oracle
        Patch list to check: none
    End of Oracle Pre Installation Checks for Linux
    Oracle Pre Installation Checks: packages for Linux
    The package  kernel-headers is not installed
    The package  sysstat is not installed
    The package  libaio-devel is not installed
    CRITICAL: The package  gcc is essential
    The package  gcc-c++ is not installed
    The package  unixODBC-devel is not installed
    The package  libstdc++-devel is not installed
    The package  elfutils-libelf-devel is not installed
    The package  unixODBC is not installed
    The package  elfutils-libelf-devel-static is not installed
    The package  glibc-headers is not installed
    End Oracle Pre Installation check of packagesLinux
    I have no idea what to do next, any help would be appreciated.
    Thanks,
    Steve

    These instructions were adapted from
    http://www.confignotes.com/2011/01/how-to-add-a-repository-manually-in-rhel6/
    1. Log in as root.
    2. Disable SELinux from the top menu bar at System | Administration | Security Level & Firewall
    3. Attach the RHEL load DVD either from the DVD drive or by attaching the iso.
    4. Open a terminal.
    a. # mkdir /srv/RHEL5_8
    b. # cp -rpf /media/RHEL_5.8\ x86_64\ DVD/Server/* /srv/RHEL5_8
      /* this takes a while.  be patient. */
    c. # cp /media/RHEL_5.8\ x86_64\ DVD/RPM-GPG-KEY-redhat-release /srv
    /* Remember to eject the DVD, otherwise the system will try to reload RHEL at the next reboot */
    5. Create “/etc/yum.repos.d/RHEL_5_8.repo” with the following contents:
    [baseOS]
    name=Red Hat Enterprise Linux $releasever – $basearch baseOS
    baseurl=file:///srv/RHEL5_8
    gpgkey= file:///srv/RPM-GPG-KEY-redhat-release
    enabled=1
    gpgcheck=1
    [ScalableFileSystem]
    name=Red Hat Enterprise Linux $releasever – $basearch ScalableFileSystem
    baseurl=file:///srv/RHEL5_8
    gpgkey= file:///srv/RPM-GPG-KEY-redhat-release
    enabled=1
    gpgcheck=1
     [Workstation]
    name=Red Hat Enterprise Linux $releasever – $basearch Workstation
    baseurl=file:///srv/RHEL5_8
    gpgkey= file:///srv/RPM-GPG-KEY-redhat-release
    enabled=1
    gpgcheck=1
    6. Verify it works
    a. # yum update
    b. should be no errors
    7. Update RHEL where <package name> is the name of the desired package.
    a. # yum install <package name>
    Before CPO can be installed, RHEL must have several packages added.  See separate instructions for creating a local update repository on RHEL, then install the packages below.
    + kernel-headers
    + sysstat
    + libaio-devel
    + gcc-c++
    - glibc-headers
    - libstdc++-develk
    + unixODBC-devel
    - unixODBC
    + elfutils-libelf-devel-static
    - elfutils-libelf-devel

  • Getting error trying to install Midlet

    Hello,
    I am trying to install a Midlet on my Raspberry Pi (ME 3.3) by doing the following:
    pi@raspberrypi ~/java_me_3.3/bin $ ./installMidlet.sh /home/pi/apps/TMP36rpi.jar
    configdb_load_to_db error: Unable to open file, trying to recover from the temporal one
    configdb_load_to_db error: temporal settings file is unavailable
    ERROR: Unable to read configuration file(s).  Check that ini file(s) exists in your application directory.
    javacall_initialize_configurations_from_file failed
    pi@raspberrypi ~/java_me_3.3/bin $In the directory /home/pi/apps I have the following files:
    pi@raspberrypi ~/java_me_3.3/bin $ ls /home/pi/apps
    TMP36rpi.jad  TMP36rpi.jar
    pi@raspberrypi ~/java_me_3.3/bin $It doesn't work and I don't know what I am doing wrong.
    Thanks
    Andy

    Andrey,
    still no luck:
    pi@raspberrypi ~/java_me_3.3/bin $ chmod 666 jwc_properties.ini
    pi@raspberrypi ~/java_me_3.3/bin $ ./installMidlet.sh file:///home/pi/apps/TMP36rpi.jar
    argv[1] = runMidlet
    argv[2] = -1
    argv[3] = com.sun.midp.scriptutil.CommandLineInstaller
    argv[4] = I
    argv[5] = file:///home/pi/apps/TMP36rpi.jar
    Command line parameters are passed.
    javacall_event_initialize: events system initialized
    Events system initialized.
    Time system initialized.
    JavaTask thread initialized.
    Starting JavaTask
    * rootfs -> /
    * /dev/root -> /
    * devtmpfs -> /dev
    * tmpfs -> /run
    * tmpfs -> /run/lock
    * proc -> /proc
    * sysfs -> /sys
    * tmpfs -> /run/shm
    * devpts -> /dev/pts
    * /dev/mmcblk0p1 -> /boot
    Error installing the suite: null
    java.io.IOException
    - com.sun.io.j2me.file.Protocol.connect(), bci=18
    - com.sun.io.j2me.file.Protocol.openPrimImpl(), bci=341
    - com.sun.io.j2me.file.Protocol.openPrim(), bci=5
    - javax.microedition.io.Connector.open(), bci=47
    - javax.microedition.io.Connector.open(), bci=3
    - com.sun.midp.installer.FileResourceDownloader.downloadResource(), bci=57
    - com.sun.midp.installer.ResourceDownloaderBase.downloadToFile(), bci=29
    - com.sun.midp.installer.ResourceProvisioning.downloadJar(), bci=59
    - com.sun.midp.installer.Installer.installStep7(), bci=11
    - com.sun.midp.installer.Installer.performInstall(), bci=167
    - com.sun.midp.installer.Installer.installJar(), bci=140
    - com.sun.midp.scriptutil.CommandLineInstaller.run(), bci=342
    - java.lang.Thread.run(), bci=5
    Finishing JavaTask
    pi@raspberrypi ~/java_me_3.3/bin $However if I run the AMS CLI (via port 65002) it works using the file:// protocol. CAn it be some kind of permission problem?
    --Andy                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Get error trying to install Unmult on AECC 13.2

    When I try to copy or move the Unmult effect into either the AE effects folder or the Common/Plug-ins/7.0/MediaCore folder, I get error code 0x80004005.
    I tried using both the 32-bit and 64-bit versions and both gave me the same error code. I have a 64-bit system FWIW.
    Suggestions?

    This is the version I downloaded: Red Giant - Products - Knoll Unmult 1.0, 1.1
    If that's not the current version, let me know where I can get the current version
    Also, I got it installed just fine on my Mac at home. My issue is on my PC at work.

  • TS1368 My Iphone 4S connects to internet and Apple Store properly but it doesnt connect to ITunes. Whenever I try to connect to itunes I get a message "Cannot connect to iTunes Store". I have to connect my IPhone to a Laptop and then access iTunes

    I have followed almost every step mentioned on forumns. I have upgraded IOS to 6. But I just cannot connect to iTunes from my iphone 4s. Everything else like WiFi, 3G etc works perfectly. I can even connect to App Store to download applications.
    Does anyone have a magic trick to make it work?. I dont want to try Restore unless its a last resort..

    "is this just a scam by itunes not to engage with problems?"
    Of course not.
    http://www.apple.com/support/contact/

  • How can update my iphone 3gs to iOS 5? coz every time i tried to install apps on my phone the msg "UPDATE REQUIRED,THIS APP REQUIRES iOS5"

    pls help me with my prob.. i cant download any apps because of this..

    If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623

  • HT4009 IX have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?

    I have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?

    Update your iOS.
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

    Hi Everyone,
    I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
    The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
    I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
    to another computer.
    My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
    The following are some details about the problem:
    1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
    I know this because a current is being read on the current meter connected to field point module.
    My questions are the following:
    1. What are the possible reasons for the data not being sent to the field point module?
    2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
    Thankyou very much for any help that you can provide. I greatly appreciate it.
    Faen9901

    Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
    1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
    2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
    3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
    choose to provide LabWindows/CVI support.
    Regards,
    Aaron

  • TS1389 I purchased a song on iTunes that is now appearing twice on my library; the first download only plays 37 seconds of the song, the second download will not play & prompts me to authorize the computer to allow it to play.  Suggestions?

    I purchased a song on iTunes that is now appearing twice on my library; the first download only plays 37 seconds of the song, the second download will not play & prompts me to authorize the computer to allow it to play.  Suggestions?

    Im having a similar promblem! Only its doesnt work on my Itunes library and the song ends at 49 seconds. Have you fixed your problem yet?
    p.s. my discussion is on the following page but no one has responded yet as I only just posted it.
    https://discussions.apple.com/thread/4097402

  • I just bought a new iMac 27'' a week ago and been having problems every morning when i come to the office with turing the system on.  I have to unplug the power cord for 10 secs and replug for it to turn on.  Kindly pls advise

    I just bought a new iMac 27'' a week ago and been having problems every morning when i come to the office with turing the system on.  I have to unplug the power cord for 10 secs and replug for it to turn on.  Kindly pls advise
    Anyone having the same problem?

    Makes no difference if anyone is having the same problem.  The important thing is that it's happening to YOU!
    You have 14 days to return the computer w/no questions asked. 
    Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/the problems.

  • I have one home computer and our household has 2 iphones. I am signed up on itunes and now my husband would like to have an account with itunes as well. Can there be two accounts for 2 users for itunes on one home computer? How do I add another account ?

    I have one home computer and our household has 2 iphones. I am signed up on itunes and now my husband would like to have an account with itunes as well. Can there be two accounts for 2 users for itunes on one home computer? How do I add another account ?

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • We have 6 ipods and 1 iphone in our house. We have different itunes accounts. We use one computer. How can we share each others music? I moved everybodies itunes media folder to the public folder but when I open itunes I only see that accounts music.

    We have 6 ipods and 1 iphone in our house. We have different itunes accounts. We use one computer. How can we share each others music? I moved everybodies itunes media folder to the public music folder but when I open itunes I only see that accounts music. We need different itunes accounts. We share 1 computer but we have different user accounts on the computer.

    Adding media directly to the media folder does not make it appear in the library.  iTunes doesn't really 'look' at that folder except to go to specific files when you call upon them from a library. You have to drag new content to each user's library, that is assuming each user has their own library.

  • My iphone 4 is not being detected by any of my computers and not charging when connected to any computer.  It will, however, charge to the car or wall.  The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

    My iphone 4 is not being detected by any of my computers and not charging when connected to any computer.  It will, however, charge to the car or wall.  The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.  I've since deleted this podcast with no luck.  I've restarted both the phone and the computer, still no luck.  One computer is running Vista and the other Windows 7, both have the latest Itunes Update.  Anyone have a fix for this?

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

  • Updated iTunes to latest version (10.4.1.10) resulted in computer no longer recognising my iPhone 4. Uninstalled and then reinstalled iTunes, still my iPhone is not detected by iTunes.

    Updated iTunes to latest version (10.4.1.10) resulted in computer no longer recognising my iPhone 4. Uninstalled and then reinstalled iTunes, still my iPhone is not detected by iTunes.
    Please can anyone help…..

    c) unistalled and reinstalled iTunes
    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • I have two computers. my laptop has os 10.6.8. my mac mini has 10.5.8, hence no app store. can i buy lion on my laptop and then burn a dvd of it and install it on my mac mini or does it have to be installed on the same computer it is bought with?

    i have two computers. my laptop has os 10.6.8. my mac mini has 10.5.8, hence no app store. can i buy lion on my laptop and then burn a dvd of it and install it on my mac mini or does it have to be installed on the same computer it is bought with?

    You can do it. This article from Macworld will be helpful to you:
    http://www.macworld.com/article/161087/2011/07/install_lion_over_leopard.html
    I recommend the "brute-force" method.
    Just make sure you have your data backed up properly!

Maybe you are looking for

  • Report Engine

    i am trying to install Oracle Developer Suite 10 g rel 1 over RHEL 5.3 64 bit, the installation pre-req stuck due to the following rpms. pdksh-5.2.14-21 openmotif21-2.1.30-8 gnome-libs-1:1.4.1.90-34.1 compat-libstdc++-devel-7.3-2.96.128 compat-libstd

  • My I pad will not allow me to delete my Facebook account and I have tried everything. Please Help Me.

    My ipad will not allow me to delete my Facebook account. I went to settings an tried to delete my account will not let me. I even entered my password an it said it was incorrect. I also uninstalled my Facebook app an tried to reinstall it am it still

  • New to ABAP Objects. Need help using events

    Hi all, I got a program from one of the text books which has the output as          pursur helps pilot          stewardess helps passenger on seat 11          stewardess helps passenger on seat 17 I am trying to modify this program to get an output:

  • LMS 4.2 , Subnet's Report

    Hi Guys How to generate a Report for all ur existence  Subnet's using LMS 4.2? thanks Ibrahim

  • After installing 10.6.7 everything is gone from hard drive

    just as if I did a clean install. I just hit the install when prompted with the software update. There was no message that it would result in a clean wiped install.