TS1424 i purchased a album in itunes and was not aware that it was editied and would like to know if its possible to have it reversed so that i can get the explicited deluxe copy album was self made vol 2

i purchased a album on itunes off of my phone self made vol2 was not aware that it was editied because it didnt state it in the album name and then realized it said it on the album cover would like to know if there is anyway to have that reveresed so that i can have the explicit verison it was also the deluxe edition

Unfortunately there are not refunds.
Apple states that all sales are final.

Similar Messages

I have a mac pro 1,1. I would like to know if its possible for me to upgrade the parts to where i can install osx mountain lion, or osx mavericks?

I have a mac pro 1,1. I would like to know if its possible for me to upgrade the parts to where i can install osx mountain lion, or osx mavericks? I am currently adding more ram so it will have 32gb of ram, i have 2 250gb HDD but adding a 250gb SSD , and have a ATI Radeon HD 4870 512mb that i will most likely upgrade to an ATi Radeon HD 5570 1gb.

The SSD will boot fast, but the real change is launching 10 programs in 10 seconds and being able to use them. (20 seconds for a few big suites).
I would not add or upgrade to 32GB RAM. You can get 8 x 2GB for $100 on Amazon.
Those 250GB HDD are "old" and slow and overdue to be replaced, reformat and use t o backup the system.
Samsung 250GB SSD is down to $150 or so on Amazon also.
The 5770 is gone, hard to find, EOL and over charged for when you do find one.
you could look into how to use a PC 6870 or others.
Or, you could hold out and wait for a refresh of Mac-Mini which can be just as fast or faster and run Mavericks.

I would like to know whether its possible to start running a vi automatically without user interaction after a system has booted up and launched labview?

I would like to know whether its possible to start running a particular vi automatically without user interaction after a system has booted up and launched labview?

> I would like to know whether its possible to start running a vi
> automatically without user interaction after a system has booted up
> and launched labview?
>
> I would like to know whether its possible to start running a
> particular vi automatically without user interaction after a system
> has booted up and launched labview?
>
LV doesn't have any sort of Startup folder as we are a little concerned
about the security issues this brings about. You can specify VIs on the
command line for LV to open. And VIs can be set to run when opened.
Combining these features, you wind up using the system's Startup folder,
placing either a batch file or a shortcut to LV with the command line
options added to list out the VIs, and finally, set the VI properties
so
that the VIs run when opened.
Greg McKaskle

I WOULD LIKE TO KNOW IF ITS POSSIBLE TO CHANGE THE SCREEN OF MY IPOD TOUCH, i WOULD LIKE TO KNOW IF ITS POSSIBLE TO CHANGE THE SCREEN OF MY IPOD TOUCH

I would like to know if it is possible to change my ipod touch screen.

Yes. If you want to do it yourself, there are several retailers who offer replacement parts and step-by-step guides on how to swap out the display. One such place is http://www.ifixit.com/.
You can also choose to do an out of warranty exchange with Apple for the prices show on this page. They don't actually repair the iPod though, but instead swap out your iPod for a refurbished one of the same capacity and generation.
http://www.apple.com/support/ipod/service/prices/
Lastly, you can choose a third party service center who can replace the screen for you. Google for "iPod Touch screen repair" for a number of results.
B-rock

I have reached out to this community as my Iphone display gone black and got the solution to keep home and power button pressed. It worked but I would like to know why it went black

I have reached out to this community as my Iphone display gone black and got the solution to keep home and power button pressed. It worked but I would like to know
1. Why it went black and is there a permanent fix for this
2.Will the IOS gets automatically updated as I feel the IOS was 5 when I got the phone in 2012 december
3.Do you suggest 7.1 for Iphone 4

1. There is no way of knowing. These things happen.
2. The iOS only gets updated when you want it to be.
3. You should always update to the latest iOS your phone will support. Apple do not write the updates to make your experience worse.

First, I would like to know if its 2014 in this forum like it is here in NJ. Second, I'd love to pick the brains of some Galaxy S5 people. Im assuming I'm in the wrong spot. If you are a guru and a Samaritan,

First, I would like to know if its 2014 in this forum like it is here in NJ. Second, I'd love to pick the brains of some Galaxy S5 people. Im assuming I'm in the wrong spot. If you are a guru and a Samaritan, please email me at (Removed)
Private info removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

Apple does not give away its products.
Unless you are the 1,000th person to show up at a new Store and Tim Cook is there and his assistant is filming you to be posted on their Home Page.
That is yet another FaceBook SCAM.

Hi I would like to know, how do I add a Hyperlink on Flash, that opens a PDF in adobe reader and not the web browser.

Hi I would like to know, how do I add a Hyperlink on Flash, that opens a PDF in adobe reader and not the web browser.

Yoh, what is FSCCommanr ? sorry man I am an absolute beginner in Flash. I tried the code:
/* Click to Go to Web Page
Clicking on the specified symbol instance loads the URL in a new browser window.
Instructions:
1. Replace http://www.adobe.com with the desired URL address.
Keep the quotation marks ("").
instance_name_here.addEventListener(MouseEvent.CLICK, fl_ClickToGoToWebPage);
function fl_ClickToGoToWebPage(event:MouseEvent):void {
navigateToURL(new URLRequest("http://www.adobe.com"), "_blank");
this is the same code I used before and it opens a pdf file in a web browser, and it doesn't open an AutoCAD file.

When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, why not 3G ?

When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, what is the purpose of 3G then? This is really nonsense using wifi + 3G iPad. need help ! Thanks.

The file is too large to download via 3G. There is a 20MB limit with 3G. The purpose of having 3G is that you have internet access everywhere and do not need to be near a WiFi hotspot or network.
Not every single thing that you do every single minute of the day on the iPad involves downloading files larger than 20MB. You can surf the internet all day long sitting out in a park somewhere with 3G - but not with a WiFi only iPad - unless you use a hotspot with it.
Try turning off your firewall and anti virus software while you try to download the iOS update.

I would like to ask if is possible to predict a future version of iOS can have the possibility to choose the color with which to write and be able to choose the character also...

I would like to ask if is possible to predict a future version of iOS can have the possibility to choose the color with which to write and be able to choose the character also...

Nobody here would have a crystal ball and know what Apple plans on doing in the furture.
If you feel this feature is so important, you can let Apple know:
www.apple.com/feedback

Recently bought a MacBook Pro And sometimes Delete key is detached (loose). I would like to know what are the steps to take to repair it?

Recently bought a MacBook Pro And sometimes Delete key is detached (loose). I would like to know what are the steps to take to repair it?

If it is within the warranty period, take it in to an Apple store genius bar for repair.
Ciao.

I would like to know if is possible to use the old iSight with my powerbook (mid 2009)?

I would like to know if is possible to use the old iSight with the macbook pro (mid 2009)?

Hi,
If the Mac has Firewire then you can use the External iSight
(Other readers
If you have Firewire 800 then you will need an adapter to use the Firewire 400 camera - Search for the word Adpater and see posts by EZ Jim for more details)
Don't daisy-chain the camera with Hard Drives
The camera only uses a data rate of 200Mbps and the differences in Hard Drive data speeds can be an issue.
The External iSIght should work no matter what Firmware is on there currently.
There is some evidence that having the 1.0.3 version (Open the System Profiler > Hardware > Firewire) on the device makes it more compatible/useable in later OS versions
The Updater is included in Tiger and Leopard.
Hard Drive/System/Library/CoreServices/iSight Updater/iSight Updater.app
An OS Update could "trigger" this to be run if you have Tiger
It can also be run as a Standalone.
It is Not present in Snow Leopard and although the documentation says this Firmware is an Audio update some people report that the camera needs the 1.0.3 Firmware to run.
(that could simply be the "Flashing" the Memory involved resets it enough to work)
10:22 PM Wednesday; June 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I just purchased Mac OSX Snow Leopard Software Version 10.6.3 before I install I would like to know if it will still keep my documents, etc? and not lose them?

I just purchased MAC OSX Snow Leopard Software update to Version 10.6.3. At present my MACBOOKPRO is Mac OS X Version 10.5.8. Since this is the first time I have purchased new software upgrade for my MACBOOKPRO I would like to know before installation if it will keep my documents, etc. intact or would it lose them? Appreciate any help?
Darci13

How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

I would like to know if iphone 5 GSM model A1429 unlocked is available in stores in the US in order to buy and use in Europe

I would like to know if iphone 5 GSM model A1429 is unlocked and is available in stores in the US in order to buy and use in Europe. Please let me know.
Thanks
ST

Not officially for sale in the US, at the present time, although Apple's flagship store on 5th Ave, in New York City, gets supplies from time-to-time. However, no GSM US model iPhone 5 will support LTE anywhere other than North America. It will not support LTE in Europe. If you want LTE support in Europe, you need to purchase your phone in Europe.

I can get the last time a patch was applied. What I need is this info for ALL servers.

Getting the last time a server was patched is a simple, single line of PowerShell:
get-hotfix -computername seadcweb10 | sort InstalledOn | select -last 1
What I need is to get a list of *all* the servers in Active Directory, and get this information for each.
I've tried variations of foreach , but I get errors.
foreach ( $p in Get-ADComputer -Filter 'OperatingSystem -like "Windows *Server*"' ) { get-hotfix -computername $p.Name | select -last 1 }
Get-HotFix : The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
At line:1 char:97
+ foreach ( $p in Get-ADComputer -Filter 'OperatingSystem -like "Windows *Server*"' ) { get-hotfix <<<< -computername
$p.Name | select -last 1 }
+ CategoryInfo : NotSpecified: (:) [Get-HotFix], COMException
+ FullyQualifiedErrorId : System.Runtime.InteropServices.COMException,Microsoft.PowerShell.Commands.GetHotFixCommand
What am I doing wrong?

Hi
The RPC server is unavailable
This error comes when any server is not pingable.
Make sure you are able to ping to all server from the server you are running the script.
Then give a try to below script :
foreach ( $p in Get-ADComputer -Filter {OperatingSystem -like "Windows *Server*"})
get-hotfix -computername $p.Name | select -last 1
MCITP - Exchange 2010 | MCITP - Windows Server 2008 R2

I would like to know, does Apple Product Giveaways have a page for competitions on Facebook? A lot of People including myself have entered in these competitions and have won and iPhone and many other items. I am one of those people who won, it is true.

Hi, My name is Sue Keeffe Ayton, I just want to know, does Apple Product Giveaways have a page on Facebook? They are running competition to win Apple Products. A lot of people seem to be winning Apple Products including myself. I saw that I have won a White Iphone 5s 32 GB, I would like to know if this is a scam. If someone goes on the facebook website and type in Apple Product Giveaways you will find this competition page. Please tell me if this page is for real.
Please I need to know if this is for real.
A lot of poeple including myself have entered these competitions and have won. I have tried to contact this page admin, but was unable to. I have even tried to contact Facebook team to find out, but was unsuccessful at this point in time.
I am not sure if these people who are running these competitions are going to send these items out to the winners. I hope they do. If you enter a competition/s and you win, you would expect to receive your winning item/s.
I never thought it was possible to win something on Facebook. When I saw my name pop up on the winners list in Apple Product Giveaways for March 2 2014 I was excited. I am one of 5 people who won an Apple product.
Below you will see Apple Product Giveaway page on Facebook. On the right you will see the competition winners. I hope someone can help me find out the truth and if its fake, I will report this to Facebook to have this page shut down. A lot of people will be hurt, disappointed and very angry this has happened
I hope you will show your support and help me solve this.
If this is not the right site to report this or find out if this is a scam, please guide me to the correct area.
Thank you for your attention.
Sue Keeffe Ayton
Sydney Australia
<Personal Information Edited by Host>

Apple does not give away its products.
Unless you are the 1,000th person to show up at a new Store and Tim Cook is there and his assistant is filming you to be posted on their Home Page.
That is yet another FaceBook SCAM.

TS1424 i purchased a album in itunes and was not aware that it was editied and would like to know if its possible to have it reversed so that i can get the explicited deluxe copy album was self made vol 2

Similar Messages

Maybe you are looking for