TS1424 Purchased an album one or more records does not play all the way through. A 13 minute track only plays for the first 3.05 minutes and then stops and the program locks up. Larry

I just purchased a album and one or more of the tracks does not play all the way through. One track which is a 13 minute track will only play for the first 3 minutes. Larry

Delete the songs from your iTunes library and redownload them by clicking "Purchased", under Quick Links at the top right of the iTunes store.
Download past purchases:
http://support.apple.com/kb/HT2519
If this doesn't work contact iTunes support here:
http://www.apple.com/support/itunes/contact/

Similar Messages

Can iTunes be set to play only one song and then stop when the song is finished and not go on to play another unless commanded?

Can iTunes be set to play only one song and then stop when the song is finished and not go on to play another unless commanded?

If you uncheck all of the songs, they will only play if explicitly commanded. Command-click in a checkbox and they will all be unchecked. Command-clicking again will check the all again should you want to do that.

HT1491 Purchased an album on my iPad it does not appear on my iMac?

I purchased and downloaded an album on my iPad. It downloaded fine and it plays etc. But even though it is supposed to synchronise automatically via iCloud it does not appear on my iMac or my iPhone. When I log into iTunes from my iMac and check available downloads etc nothing appears. On iTunes Store it does not show it as purchased.

Highlighting won't transfer to Word. I haven't used iCloud beta all that much so am not sure whether it shows or not, but at the end of the day it is a beta.

Why watch one Music Video and then Stop (and the next one? no fun)

I would like to know if Aple TV let "Music Videos" play without stop.
I would like to see all my Music Videos without stop,... but with "Aple Tv" i can see only one, and then if i want to see an other one, i have to do it by my self. I thought ok, maybe i have to have a "Playlist" with all my "Music-Videos" and then i could see all of them... but it didn´t work either.
Since i discovered that i cannot do that, i stop buying "Music-Videos"
Can anyone help me pls and tell me how to do it?

Welcome to the  Discussion Forums.
As Chenks says and you have discovered, continuous play of music (or for that matter any) video, is not currently supported.
You may want to check future updates to see if this feature gets included, but nobody here knows whether this will happen or not. There is the possibility that the lack of this feature is intended and is omitted to protect the unit from being left playing continuous video 24/7, but who knows.

HT203175 I downloaded an album, but each song will start and then stop without finishing the song. Can I delete the album and redownload without buying it again?

I downloaded an album, but each song will start for a few seconds and then stop and either start over or go to next song. Can I delete the album and download it again without paying again?

Yes... If you live in a Region that allows re-downloading Music...
Delete the Song(s) and re-download...
Download Past Purchases
http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us

HT1725 can I delete an album from my computer and re-download from my purchases? I bought an album and some of the songs only play partof the way through and some won't play at all. One of them says this computer is not authorized to play this trac.

can I delete an album from my computer and re-download from my purchases? I bought an album and some of the songs only play partof the way through and some won't play at all. One of them says this computer is not authorized to play this trac.

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks only from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If you don't see them straight away it may help to restart iTunes. While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

One or more devices do not support multidevice tasks.

Hi,
I'm working with 2 USB X series DAQs (USB 6356). I am acquiring analog voltage data from all 8 channels on both DAQs (so 16 analog input channels total). I need the data acquisition to be synchronized and to trigger from an external digital source (a signal that I currently have wired into PFI0 of Dev A). I am using a sampling rate of 800 kHz, and a buffer size of 400 kS.
I have tried using one express vi for both devices; two separate express vis for each device; and recently changed to the DAQmx icons (as pictured in the attachment). Either way I get an error (error -201426: One or more devices do not support multidevice tasks.). It then references DevA and DevB as the devices that don't support the tasks. I was under the impression that multidevice tasks are okay with X series devices. I am using NI DAQmx 9.5.5.
In the attached picture, I have left out most of the while loop. The part of the diagram I left out is just for visualizing and saving the data, I have included the parts I felt necessary for describing my problem.
I would really appreciate any advice.
Thank you,
Leslie
Solved!
Go to Solution.
Attachments:
multidevice daq vi.PNG ‏24 KB

Thank you both, for shedding some light on my setup and this error. The information I was finding on the NI website did not seem to specify that USB Xseries devices were an exclusion to the statement made.
I have changed my program and built two separate tasks, which has eliminated the error 201426 message. I have attached a picture of my newest program. It is still not functioning, however no error messages are sent. for(imstuck), I'm not sure what you mean by "build an array of tasks" or read inside a for loop. We view the digitized signal from each channel (DevA ai0:7 and DevB ai0:7) separately anyway, so would concatenating the waveforms be necessary? When I run the program and "highlight execution" the program seems to get stuck on the DAQmx read tasks, no errors, it just doesn't proceed or send the waveform data. Am I missing something or is the for loop/concatenating the waveforms necessary?
Thanks again,
Leslie
Attachments:
separate tasks.PNG ‏41 KB

Purchase info record does not exists in purchase organization 1000

Hi experts,
          I have created a new enterprise structure in SAP. when i am creating a PO its picking the correct info record, but when i am doing GR, its giving the error as 'purchase info record does not exists in purchase organization 1000". I have maintained everything perfect. the only thing i have changed is I have moved the open and close period from 11-2002 to 12-2008 in MMPV.
         Please give me some suggestions, where it can go wrong.
Thanks & Regards,
Poorna.

Hi Guys,
          Thanks for all yours responses, Actually what deepak said was right, but in my IDES system i am not able to create new entries in assign plant to std purchase org. I found the database view for that, V_001W_E its for table T001W. So i looked into that table i found that std purchase org was given as 1000. i made direct entries in that table, i thought the reason for this may be due to , that i copied plant from 1000. After making entries , i did not got the error message that was i am previously getting.
Thanks & Regards,
Ravi.

4 albums purchased from iTunes yesterday have songs not playing all the way through. They play for a period of time and skip to the next song. Everytime they are played. Can anyone help?

Some songs I purchased last night are not playing all the way through. Several songs from the 4 albums I purchased play for a period of time then just skip to the next song. The songs that do this, do it everytime they are played at the exact same spot. The songs that are affected skip to the next on iTunes on my PC which is updated to the most current iTunes and my 160gb iPod classic. Everytime they are played at the exact same spot. However on my other device, iPhone 4s all songs play just fine. I have almost 7,000 songs on my iPod and this has never happened before and I have played it awhile since downloading those albums yesterday. This is only happening with the albums purchased yesterday. Can anyone help me figure out what is wrong?

I'm having the same issue with a few songs I just downloaded. It skips randomly in the middle of the song.

I purchased Label Printer Pro 7, but it does not work. It crashes. Please recommend an address/shipping label program that works with Avery labels. Thanks.

I purchased Label Printer Pro 7, but it does not work. It crashes. I press print, and the program closes. I press save, and the program closes. I press print and the program closes. I have had an email exchange with Pabel Printer Pro 7, but the best they could offer was to go to Utilities and click on fixed permssions. I have done that several times, and the program still doesn't work.
Can you please recommend an address.shipping label program that works with Avery labels that I can purchase, and that is also simple to use?
Thanks,
Paula

I purchased Label Printer Pro 7, but it does not work. It crashes. I press print, and the program closes. I press save, and the program closes. I press print and the program closes. I have had an email exchange with Pabel Printer Pro 7, but the best they could offer was to go to Utilities and click on fixed permssions. I have done that several times, and the program still doesn't work.
Can you please recommend an address.shipping label program that works with Avery labels that I can purchase, and that is also simple to use?
Thanks,
Paula

How do i get itunes or any other program for ipod to play one song and then stop instead of contiuing playing. I need it to be in the same playlist and ready to play the next song when I press play?

how do i get itunes or any other program for ipod to play one song and then stop instead of contiuing playing. I need it to be in the same playlist and ready to play the next song when I press play?

Good luck. I tried to do this to cue sound effects for a theater, and never found anything. iTunes will definitely *not* do this, nor was I able to find any player that would play one song at a time in a single playlist.
In my case, I ended up using AutoHotkey to tie individual tracks to the keys on an external keypad. This was an excellent solution for my problem, but I don't think AHK runs on Macs.
One workaround is to make a folder, and fill it with *shortcuts* to the songs you want (ie, the actual files). You can change the names to start with numbers to get them in the right order. Then if you double-click on one it will play just that song. You'll still have to double-click on each song.
Might be a good time to learn AppleScript It would also be pretty easy to write a Java app to do this.

One or More Resource is not configured properly ..

All,
I am having issue when i am trying to disable a user , on the UI , its throwing an error saying "One or More Resource is not configured properly .."
Can you please help me to understand the issue
Thanks
Preeti ..

You can try isolating the resource which is causing the issue , make sure that all the resources are having disable trigger mapped in Task effect of the task .
Thanks
Suren

Error Uploading Files - One or more files could not be uploaded

Hi, I used Adobe SendNow without any problems for years. Since the migration to Adobe Acrobat, I don't think I have once managed to successfully send any files. Each time I get the message: Error Uploading Files - One or more files could not be uploaded. Please try again. If someone could help that would be great or else I will need to subscribe to alternative file sharing service that actually uploads files. I previously filed a Case Request looking for assistance, and within 2 seconds I received an automated response: "With this response, we believe your issue is resolved and have therefore closed your case 0186251803" !!!

Hi,
Those sizes (and numbers and numbers of files) shouldn't present any problem, but obviously something is amiss.
If you wouldn't mind trying to upload via the Files tab, and then sending from there, that would help us to diagnose. To upload your files, simply sign in and click on the Files tab. You might want to make a folder to hold the files you are going to send. To do this, click on the folder with the + sign. Then open that folder and click on the cloud with the arrow.
(The other way to upload files is to simply drag and drop them.) If you have trouble uploading many files at once (you shouldn't!), try one at a time. Again, I am interested to know what method, if any, works for you.
Now that you have your files uploaded (at least, I hope you've been able to do it successfully!), click on the Send tab and follow the instructions for selecting Acrobat.com Files instead of My Computer.
You should now see the folder you just created. Open it up, and select the files you want to send.
If you have any trouble with this method, give a holler. Though since it's getting late here on the east coast, I might not be able to respond until the morning.

Error: ORA-16796: one or more properties could not be imported from the dat

DGMGRL> CREATE CONFIGURATION prod as
PRIMARY DATABASE IS prod
CONNECT IDENTIFIER IS prod;Configuration "prod" created with primary database "prod"
DGMGRL> ADD DATABASE standby as
CONNECT IDENTIFIER IS standby
MAINTAINED AS PHYSICAL;Error: ORA-16796: one or more properties could not be imported from the database
Failed.
DGMGRL> ADD DATABASE standby as
CONNECT IDENTIFIER IS standby
MAINTAINED AS PHYSICAL;Error: ORA-16796: one or more properties could not be imported from the database
Failed.
can any one help me out , i am not sure what could be the problem.
i checked the listner and tnsnames every thing looks good, if u want me to post any thing else plz do let me know
thanks
firdous

16796, 0000, "one or more properties could not be imported from the database"
// *Cause: The broker was unable to import property values for the database
//          being added to the broker configuration. This error indicates:
//          - The Oracle Net service name specified in DGMGRL CREATE
//            CONFIGURATION or ADD DATABASE command was not one that provides
//            access to the database being added.
//          - There were no instances running for the database being added.
// *Action: Remove the database from the configuration using the REMOVE
//          CONFIGURATION or REMOVE DATABASE command. Make sure that the
//          database to be added has at least one instance running and that the
//          Oracle Net service name provides access to the running instance.
//          Also check the broker log file for additional information.
//          Then, reissue the CREATE CONFIGURATION or ADD DATABASE command.

Error "One or more values could not be set" - Oracle Connector

Hey guys - I should have known there was a forum here with smart people. I'm hoping someone can shed a little light on our latest issue. When we try to invite people not within our company to a meeting, (even if they are included in our contact list/address book, etc) the error "one or more values could not be set" I'm pretty sure it's a forms error, but can't seem to resolve it. It started with the 2003 outlook service patch. I've applied every connector patch available and have searched for an answer, but can't resolve this icky problem (very crabby users) I've searched this forum but didn't see this topic. If it's already been addressed, forgive me and point me to the thread. If it hasn't and anyone has an idea, I'd appreciate some help!
Thanks
Kim

I have CRXI
First off, try verifing the database
Database,
Verifiy Database
Then if it is still broken.
Double-check all of the unlikely places in your report structure. Look at the subreport links. Look through all your formulas (including the ones for formatting). Keep in mind that Crystal doesn't have IntelliText, so you need to double-check (or even triple-check) that everything is spelled correctly.
Odds are strong that, somewhere in there, you are accidentally referencing a field that doesn't exist.

TS1424 Purchased an album one or more records does not play all the way through. A 13 minute track only plays for the first 3.05 minutes and then stops and the program locks up. Larry

Similar Messages

Maybe you are looking for