TS1493 When I go to change the drive letter, I go through the entire process and when I click on disk management, my ipod is not listed. On my computer it is still listed as a digital camera

I have searched online and tried all the possibilities to fix the issues I am having but have sadly been unsuccessful. My ipod is being read as a digital camera, it is not reading on my itunes therefore I cannot sync any music or apps I have purchased. The only solution I couldn't try was to change my drive letter. Main reason being, my device did not show up under the disk management page.

If you have pictures (on your iPod) in the Camera Roll, that may be why the iPod is showing up as a camera. The Camera Roll is where pictures taken on the iPod, screenshots taken on the iPod and pictures saved from Safari are stored.
Copy the pictures from the Camera Roll and put them onto yuor computer. Once you have done that, you can delete the pictures from the Camera Roll and perhaps the iPod will stop showing up as a camera.
The iPod Touch does not have an accessible hard drive, so it will not show up under disk management.

Similar Messages

HT1296 Having difficulty getting music from my old 4S to transfer to my new 5S. I go through a Sync process and when it gets to the last step of Sync, the blue Audio bar shrinks back to show the few albums that are already on the phone.

I've been trying to get songs from my old 4S to my new 5S. I am using a computer to accomplish this. My 5s has a few albums I purchased from iTUnes. I see all the music I want to transfer to my new phone. I go through a Sync process and it cycles through the steps but the music will not get to my new phone. I used the Manage my music configuration.

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

Removing the I POD as a Drive Letter once Done updating The I Pod?

Does anyone know how to rid a XP PRO OS of the "Drive Letter" that setting up the I Pod Leaves? I restored an I POD for my Daughter on my computer. And I will probably never need the software again on this system. But I am stuck with "I POD I:\"
in my drive letter tree. I uninstalled all of the I Pod Software but XP PRO still sees the drive even though its not present! Whats that About? Anybody have any Ideas on how to get rid of the I Pod Drive letter after you uninstalled all of the software that is used to "Restore a Pod"? Its driving me nuts seeing a Drive that dosen't exist in Explorer and My Computer. And Knowing Microsoft sooner or later it will cause me a headache.

- I would try resetting the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
and then try restoring it. This probably will not work but is worth a try.
- Next I would disconnect the iPod from the computer and let the battery fully drain. When drained, charge it for at least an hour then:
-- Try resetting it as above and see if iTunes will see the iPod. If it does, then restore the iPod.
-- If not in iTunes try placing the iPod in recovery mode to see if that make the iPod visible in iTunes. If it does then restore via iTunes
-- Last, place in DFU mode to see if that makes the iPod visible. If it does then restore via iTunes.

When changing the drive letter for the ipod itunes still wont come up

when changing the letter a couple of times itunes wont come up and trying to restore it nothing happens i have reinstalled itunes like 12 times and the 6/28/06 software messed me up i dont know what to do when i turn on my ipod its like i barley got it from the store when i hook it up and change it when i take it off it does that what should i do i need some help please someone i cant do this anymore anything out there

Try doing a Ctrl-Alt-Del, and in Task Manager click on the Processes tab. End the iTunesHelper and iPodService processes. Then reconnect the iPod and go into Disk Management, and the iPod should show up. Change the drive letter to something other than C, then eject the iPod and restart the computer. When you reconnect it you should be able to get it recognized.

Copy the SQL Binaries and Data to another drive and then change the drive letter to previous drive letter

Hi All,
We have SQL Server 2012 SP1 installed on E drive (which means SQL Binaries, Database and LOGs) are in the same drive E, we are not able to backup the SQL Server because according to Backup Vendor their is a problem with the DISK E which is why the backup
is not successful, We have added one more drive with the same space, we have stopped SQL Server services and copy each and every thing from E drive to new drive and changed the current E Drive to K and changed the new drive to E, after that when we tried to
start SQL Service but it was not starting, we have again reverted back the original drive to E and service was successfully started, please note here that SQL server service logon is NT service / local service. Please help us that how to do achieve this as
we are using the same E drive and OS should not know any thing. Please help us to copy and then change the drive letter to E so that we can delete the old drive.
Thanks
If answer is helpful, please hit the green arrow on the left, or mark as answer. Salahuddin | Blogs:http://salahuddinkhatri.wordpress.com | MCITP Microsoft Lync

We have stopped SQL Server services and copy each and every thing from E drive to new drive and changed the current E Drive to K and changed the new drive to E, after that when we tried to start SQL Service but it was not starting,
You should not have done this. Even if you install complete SQL Server on Separate dedicated drive few binaries would always go on system drive that is C drive so your idea of moving files to other drive would sure create a problem. As a fact you cannot
move SQL Server complete installation from one drive to other apart from uninstalling and reinstalling again.
Copy it back an hope fully you would be able to restart. Why should you take a product which allows you to change sql server drive its a bad product. I guess backup engineer does not how to configure backup agent
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Hi, my Ipod Schuffle (4 gen) dissapears from windows vista right after I execute Itunes, I've change the drive letter, erase temps in App data file, verified USB drivers, etc... Can someone guide on how to solve this?

Hi, my Ipod Schuffle (4 gen) dissapears from windows vista right after I execute Itunes, I've change the drive letter, erase temps in App data file, verified USB drivers, etc... Can someone guide on how to solve this?

If you want the shuffle to be always visible in Windows (outside of iTunes), you need to Enable disk use.
Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, select the Summary tab. You should see a checkbox that says Enable disk use. Check it and click Apply.
NOTE: If disk use is enabled, you have to Eject the shuffle in iTunes, BEFORE you physically disconnect it. If disk use is NOT enabled, you can disconnect the shuffle at any time, as long as iTunes is not doing something with it at that moment (such as syncing); the shuffle's light will then be blinking (to indicate DO NOT DISCONNECT).
So, unless you want to use the shuffle like a USB flash drive (carry random files on it), you may want to NOT Enable disk use.

HT4718 I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive,crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?

I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?

A 2008 Mac won't have originally shipped with Lion. You need to install 10.6.8 on the computer, log into the Mac App Store with the Apple ID you used to purchase Mountain Lion, click on the Purchases tab, and download it.
(121465)

I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

May not make a difference anyway. The Logitech support site does not show drivers for Mac OS for the F310:
http://www.logitech.com/en-us/support/gamepad-f310?crid=411
I'd contact their support to find out if there is a Mac driver available, and if they can either give you a web link to get it, e-mail you the software, or snail-mail you a standard-size disk with the drivers.

Just the other night my phone desided to reset itself, and when i went to restore it it came up with The iPhone iPhone could not be restored. an unknown error occurred (-1).

Just the other night my phone desided to reset itself, and when i went to restore it it came up with The iPhone iPhone could not be restored. an unknown error occurred (-1).
Please Help i need this phone....and i dont have the money to replace it!

I havent jail broken it so its probable a hardware issue then.......well then.......
anyway thanks man
Cheers!

I changed the drive letter on my iPod and now iTunes won't recognize it!

Help please! I contacted an Apple associate and they told me to change the drive letter of my iPod in My Computer. I did that and now iTunes won't recognize my iPod at all and I can't change the drive letter back to the original one. What do I do?

Try Resetting Your iPod while it's connected to the computer.
Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
This will often get it recognized. It may take several attempts.
Try closing and re-starting iTunes. There have been cases where iTunes refuses to see an iPod, but after re-starting, it works again.
Also try re-booting the entire computer. Especially if the PC has been operating for a long time &/or many programs have been opened and closed, repeatedly.
Other USB connected peripherals may be the cause as well. Try removing all connected USB items and attaching the iPod. If you have a USB keyboard, it may be worth a try using the adapter to convert it to non-USB. If the iPod connects, continue plugging things back in until you have the problem return. You may have then isolated the issue. Sometimes it could be a printer, camera, Flash Card reader, or other attached device causing a conflict.

How can i get my car to change the track when i am listening to the music on my phone through the line-in?

how can i get my car to change the track when i am listening to the music on my phone through the line-in? is there a app i can download so it will recognize it? i have a vauxhal astra and the controls are on the steering wheel

First question is how old is Astra and you are in UK ( well you must be to have a Vauxhall)
Normally the Radio only has a line in socket to allow sound
You have two choices here either a simple cable with a 3.5mm Headphone plus at each end
or a cable with the headphone plug to place in car's line in plug and a wide Apple socket to fit the base of your iPhone This allegedly gives better sound but you have to control the iPhone for music selection
The equipment you need to control the iPhone from the Steering Wheel controls ,which I suspect currently handles radio /Cd tracks /stations ,is much more complicated it will have to be integrate with the Factory Fitted radio
and designed to manage the S/Wheel controls and translate to the iPhone .
Fitted into back of radio etc etc
If car is a recent Vauxhall there may be a kit available from them .but will not be cheap
Many imponderables you did not give much away in your OP

I wanted to ask whether the camera for ipod touch comparable to a digital camera? if not are there apps available that can turn it into a digital camera? i want to buy an ipod touch and i like photography....what should i do?plz suggest

i wanted to ask whether the camera for ipod touch comparable to a digital camera? if not are there apps available that can turn it into a digital camera? i want to buy an ipod touch and i like photography....what should i do? plz suggest

The iPod touch has a very rudimentary camera. It has only a 0.6 MP resolution, no optical zoom, no flash, etc. There is no app that can improve this as it is limited by the hardware. So it is not a replacement for a digital camera (nor even for an iPhone whose camera has a 5.0 MP resolution.

Changed drive letter after installation of Creative Suite, cannot open by double clicking file.

Recently my computer died so I had to put my harddrive in another computer. The drive letter was different from my old drive. I didn't notice this at first and re-installed all my software that I wiped for a new Windows install on the partition (including the Creative Suite).
When I tried to open another program that relied on the old install of the drive - it failed. So I changed the letter back to what it was originally as loads of programs installed on that drive relied on it.
Of course when I changed the letter path of the drive all my Adobe Suite related files are no longer associated with the programs. When I try to manually open the file with the program - eg. E:/Program Files(x86)/Adobe/Adobe Photoshop/Photoshop.exe it doesn't set the default program, so every time I have to open photoshop and browse to the file I want to open (ctrl+O).
Any solutions to this without installing the suite again?

I've tried by going through this dialogue here:
When I try to use the .exe to open the .psd it doesn't set it as a choice as if I didn't select it. I can set the default program to open it to notepad, hl2.exe etc. etc. but not the program im after.
P.S. I don't know my login details because they are saved automatically at home. Hence new account.

How to get the drive letter of a Volume using command prompt

Using windows command line tools i want to get the drive letter of a volume, by specifying its volume number.
For example i have a HDD with 2 volumes: Volume-0 and Volume-1
I want to set a Variable say 'Letter'=<Drive Letter> such as
SET Letter=<Command> <Volume Number>
Is there any command which can do this for me...
Thanks...

Hi,
You can use the diskpart tool to assign a drive letter to the drive by specifying the volume's number.
1.Open Command Prompt.
2.Type:diskpart
3.At the DISKPART prompt, type:list volume
Make note of the number of the simple volume whose drive letter you want to assign, change, or remove.
4.At the DISKPART prompt, type:select volume n
Select the volume, where n is the volume's number, whose drive letter you want to assign, change, or remove.
5.At the DISKPART prompt, type one of the following:assign letter=L
Where L is the drive letter you want to assign or change.
For more detailed information, you could refer to the article below:
Assign, change, or remove a drive letter
https://technet.microsoft.com/en-us/library/cc757491(v=ws.10).aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I changed the date on my mac to 1995 now date and time or start up disks wont open what can i do?

i changed the date on my mac to 1995 now date and time or start up disks wont open what can i do?

Many system actions will misbehave, given an inaccurate date. If you cannot open System Preferences you can reset your system date and time using Terminal.
Please read everything that follows before proceeding. Write them down if necessary because the effects of setting a preposterous system date are unpredictable.
Quit System Preferences, force quit if necessary: OS X: How to quit an unresponsive application using Force Quit
Open Terminal - it is in your Utilities folder and looks like this
You can find Terminal by using the Finder's Go menu and choosing Utilities, then double-click the Terminal icon.
At the prompt, you will be typing a command resembling the following:
sudo date mmddhhnnyyyy
... but you must substitute the actual date and time in the command that corresponds to the date format used for your location. In other words if your custom is to use a date like 16 December 2013 then reverse the mm and dd values.
Substitute numerals in the above command according to the following:
mm = month
dd = date
hh = hour (24 hour format)
nn = minutes past the hour
yyyy = year
Each of those values must be two digits except for the year which can be two or four digits. As an example if the current date and time is December 16, 2013 at 9 PM your command will be the following:
sudo date 121621002013
or
sudo date 1216210013
Either one will work.
To recover from your inability to use System Preferences to set the date and time, the value entered does not have to be precise, it just has to be approximate.
Enter that command using the actual time and date for your location and in the appropriate format, then press the Return key. Terminal will ask for your Admin Password - the same one you use when you log in to your Mac. Type it and then press the Return key. What you type will not appear, not even with •••• characters.
To determine if your change was effective just type the date command and press the Return key. Terminal will reply with the date and time. If it appears correct and in the correct format, you should be able to open System Preferences > Date & Time once again. Selecting the "Set time and date automatically" and choosing an appropriate time server will adjust your Mac's system clock to the precise time.

TS1493 When I go to change the drive letter, I go through the entire process and when I click on disk management, my ipod is not listed. On my computer it is still listed as a digital camera

Similar Messages

Maybe you are looking for