TS1538 i hanve an i phone 2g and it is stuced in recovery mode it is not going in dfu mode it is purchased from usa what shoud i do??
i hanve an i phone 2g and it is stuced in recovery mode it is not going in dfu mode it is purchased from usa what shoud i do??
If it's an original iPhone, you may as well dispose of it responsibly and buy a new phone. Apple stopped servicing them a while ago.
Similar Messages
-
i backed my phone up on itunes and then I changed the battery on my own. the problem is that I can set the phone as a new one but when I try to restore a backup it goes on DFU mode and stay stuck. What can I do?
Once you opened the device you voided any post-warranty support from Apple or the forum. You are on your own. You can try a 3rd party repair facility, but you cannot get any help here or from Apple.
-
im using iphone 3GS with ios 4.1;the iphone is purchased from USA and unlocked;I live in India so if I update to IOS 5 will my phone get locked? if so how to unlock in that case? please help
No 3GS sold in the US was ever unlocked officially. Any attempts to update a hacked or un-officially unlocked iPhone will likely result in it being relocked to the original carrier.
-
Hi! I just bought a new laptop and have downloaded itunes and signed in. When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs. How can I get that music to show up in my library now on my new computer? Also, will itunes still recognize my ipod on my new computer when I plug it in? I have a Dell with Windows 7 and an ipod nano, I think. Why can't I just plug my ipod in and "sync" it? Will that move my CD music into my library on itunes? Thanks for any help! Soooo confusing!!!
" When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
Correct.
" How can I get that music to show up in my library now on my new computer? "
Copy it from your old computer or your backup copy of your old computer.
The sync is one way - computer to ipod. -
I put video clips together and added music off of iTunes
but it will not attach when I put it on youtube or vimeo.
what is wrong. It plays as I made it on iMovieThank you all for your replies. Here is what i ended up doing. I cannot afford any 3rd party software so i went to itunes and manually entered all my playlists. As I had indicated my purchased music was on my new computer just not the playlists and I could not sync my ipod. After I rebuilt all my playlists I tried to restore my ipod to factory defaults/new. All of the steps called for in apple support and elsewhere were not available to me. I connected my ipod, went to my computer, right clicked my ipod, and formatted. That wiped my ipod so when I connected to itunes it then gave me a restore option. I did the restore and all is good in the empire again. I can now buy new music and sync my ipod so I am a happy camper.
Thanks to all. -
Just purchased the latest ipod nano. Running itunes 11.1.3(8). Why will the music not load? Under devices the 'sync' choice can't be selected and instead only have 'transfer purchases from ipod' What to do?
Just purchased the latest ipod nano. Running itunes 11.1.3(8). Why will the music not load? Under devices the 'sync' choice can't be selected and instead only have 'transfer purchases from ipod' What to do?
-
I'm trying to download Gympact app. It's my first additional app and I keep getting the message "this ID has not yet been used in iTunes store." Anyone know what's going on? I don't want to buy a tune.
The message is tru, the Mac App Store and the iTunes Store are the same store and use the same account. What does the system want you to do?
-
I have a white ipod touch 4 and it will not go into DFU mode. I know I am doing it right as I have 2 other black ones that I can put into DFU anytime no problems. The ipod works perfect besides that. Can anyone help?
DFU or Device Firmware Upgrade mode allows all devices to be restored from any state.
Above from:
DFU Mode - The iPhone Wiki -
Hi, After updating my phone to the iOS 7, it looks like its keypad is not working properly like It gets a little hanged. What would I do solve this?
Thanks
it really works. -
Laptop not going on sleep mode and on shut down light remain on in Windows 10
I have updated Windows 10 in my laptop and after this update from 8.1, my laptop is not going on sleep mode when I put the laptop screen down. Moreover, when I Shut down the laptop, it is almost shut down everything closes except the lights. Light remain on for indefinite time. Then, I have to press the power button for sometime in order to forcely close all the lights. Please give me the solution.
You and loads more peoplehttp://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Windows-10-Laptop-won-t-go-into-sleep-mode/td-p/5171069 No 100% fix yet.
-
Hi community,
I am trying to integrate Cisco Unified Presence 8.6.1.10000-34 with IBM Lotus Notes 8.5.2 with the integrated Sametime Client version 8.0.2 via the Cisco Plugins 8.6.1.1185.
Phone control is working fine, whereas the presence status is not shown (= no handset symbol next to the Sametime user). When I look in the preferences of the plugin, I can see that the plugin has connected successfully to the CUCM (8.6.2.20000-2),whereas the connection to the CUPS has not been established.
The user id as well as the password are all the same on all systems. Here is a description of what I have configured via the ciscocfg.exe tool:
Feature Control:
- Enable Phone Status -> checked
- Enable Dial Using Cisco IP Communicator -> unchecked (not required)
- Enable Control Desk Phone -> checked
- Default Mode -> Control Desk Phone
Control Desk Phone Settings:
- Voicemail Pilot Number -> left blank (no voicemail)
- Cisco Unified Communications Manager
- Servers -> IP address of CUCM
- Read Only -> unchecked
- Use as Default CUCM -> checked
- Synchronize Credentials -> checked
- Use Sametime Credentials -> checked
Use Secure Connection: -> not required
LDAP Phone Attributes: -> not required
Phone Status Settings:
- Cisco Unified Presence Servers -> IP address of CUPS
- Read Only -> unchecked
- Synchronize Credentials -> checked
- Use Sametime Credentials -> checked
- Sametime User ID Mapping
- Use Business Card Attribute -> MailAddress
- Remove Domain -> checked
- Display Off-Hook Status Only -> unchecked
At the moment I don't see an error in the configuration, but maybe I am wrong. Could anyone please tell me what the error could be?
Thanks a lot in advance!
Kind regards,
IgorHi all,
here are some additions to my above post:
Servers and clients used:
1x CUCM 8.6.2.20000-2
1x CUPS 8.6.1.10000-34
1x IBM Lotus Domino Messaging Express Server 8.5.2
1x Sametime Entry Server 8.5.2 (on top of the Domino server)
2x IBM Lotus Notes 8.5.2 with integrated Sametime 8.0.2
2x Cisco Phone Control and Presence with Lotus Sametime (PCAP) 8.6.1.1185
2x Cisco Unified Personal Communicator 8.5.5.19839
Setup:
- CUCM, CUPS and CUPC are working fine, i.e. Desk Phone control via CUPC, as well as availability and presence status are working without issues
- IBM Lotus Domino server is the LDAP Directory, the Sametime Entry Server is installed on top of the Domino server and uses the Domino Directory
- User ID and password on CUCM/CUPS match the ShortName field and password in Domino
- The PCAP plug-in has been manually deployed to both Notes clients with the following configuration:
- Enable Phone Status -> active
- Desk Phone Control -> active
- no credential synchronization for CUCM and CUPS, i.e. every user must fill the user details himself
- Sametime User ID Mapping is implemented via the LDAP Attribute uid (which is equal to the user id in CUCM)
- LDAP configuration filled in with details of the Domino server
Phone Control is working fine, also the connection to the LDAP server (Domino) is fine. However, when I type in the credentials for the CUPS server login, I can see (in Troubleshooting pane) that the user (pparker) is connected to the CUPS server for a short period of time and then gets disconnected. After that no connection is possible to the CUPS server, i.e. status is always disconnected.
I have collected the Tomcat (EPASSoap00010.log and security00010.log) logs via RTMT and compared them to the logs from the PCAP plugin. The relevant time period is from 15:14 to 15:17. In the Tomcat logs I can see that the authentication is successful (see attached files), however in the log of PCAP plugin I can see the following messages:
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
I don't understand why the connection is rejected although the Sametime Internal ID and CUPS User ID match. Does anyone know what the issue could be?
All posts are very much appreciated!
Thanks a lot in advance!
Kind regards,
Igor -
When on a phone call and a second call rings in you do not see who it is or given the option to answer or ignore the call. My phone did that previously. Why would this be?
My phone is doing exactly the same thing... I tried changing the language as someone else suggested but it didn't work. It is very frustrating!!
-
Just purchased an I-Phone 5C and when connected to my lap top it is not recognized by I-Tunes.
I can still sync my 4S. I worked with 2 layers of the Apple support team 1115002 and they too were unable to get I-Tunes to recognize the phone. The phone shows up under my computer and I can access the photo files. I am running Windows 7. The trust message appears each time I try to connect. I can use an older P.C. with XP and I-Tunes works with the new phone. Help!
On a different page I searched someone suggested renaming my wireless router from the default to a unique name. That seemed to have worked...
-
HT1414 i have a i phone 4 and i cant update software to 4.3 why not
why cant i update my i phone 4 software to 4.2 or better still 5.0
because the newest update is 6.1?
Have you updated your itunes to 11.1 on your computer? -
My Ipone is not sending text messages. i can recieve the messages, but my replies are not being sent.. this seems to only be an issue to sendin to other iphones. The blue messages are not being sent. if the box is green, the meessage is sent.this seems to ahve started after i down;oaded the latest operating system. HELP!!
Welcome to the Verizon family, ivpacks! I regret to learn that your alarms didn't work. I also regret that there is a problem with the messages. Have you tried the alarm again? Does it still not work? For instance, just set the alarm for a couple of minutes away to ensure that the alarm goes off.
When you send a text, do you get an error? If you power the phone off/on, do the messages send? This particular issue is expecting a software update to resolve the issue with texts and picture messages.
I believe that you have chosen a great device, but keep in mind that there is a 14 day exchange period. If you exchange for the same make/model, you will not pay the restocking fee.
If you do exchange for a different make/model, there is a $35.00 restocking fee.
TamaraH_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
It on, it asked for a four digit pass code. After several guess attempts, making me wait for an hour to try each time, I gave up. The next day, it asked me to connect to iTunes. I remain locked up with that request. I've re-booted several times and g
-
Configuration parameters in OWB mapping
Hi , I have a requrement where in I need to find out some details of an OWB mapping through a SQL script. For a mapping when we "configure" the Table operators like entering the Schema name. Which table in OWBRT_SYS holds these details basically I ne
-
"We cannot complete your iTunes store request."
Since doing a full Windows 7 installation and resultant re-instal of iTunes, I get the following response when trying to sign in to the iTunes store: "We could not complete your iTunes store request. An unknown error ocurred (-9808). There was an err
-
Rebuild screen freeze - unable to update firmware as not docking. Help please
Hello, I've got an 8gb Zen. Always worked fine til I tried one of those hand crank chargers, since then I turn it on and it will freeze on the rebuilding screen. Ran scandisk on it - no joy. Wanted to try and update firmware to see if that helped but
-
Adding a line to an extrenal file
hi! I am writing a program but am having a small problem with a bit that I just can't seem to work out! I have a method that gets details from the user to add to an external file. However, When the data is added it doesnt just add it and shift the al