TS1538 I have restored my ipad 2 but it still will not let me in. It gives the message iPad is disabled...connect to iTunes

I have restored my ipad 2 but it still will not let me in it. It gives the message iPad is disabled...connect to iTunes. I already connected to iTunes and went right back to message.

Try using recovery mode. You want to use the computer that you use for syncing your iPad so that you can restore from a backup at the end of the process.
http://support.apple.com/kb/HT4097?viewlocale=en_US&locale=en_US
If you have an iCloud backup, you can restore from that as well. If you have no backups, you will end up losing everything on the iPad and will have to start all over again.

Similar Messages

I misplaced my ipad, so I remotely erased it. Then I found it, but now I cannot use all of the options in the settings. I have restored from backup, but it still is not letting me use all functionality. Help!

I misplaced my ipad, so I remotely erased it. Then I found it, but now I cannot use all of the options in the settings. I have restored from backup, but it still is not letting me use all functionality. Help!

Would throwing it in Recovery mode and restoring as new clear it up?
(same for Ipad)
Step 1: Turn off the iPhone. To do this press and hold the power button till you see the “Slide to Power off” screen. Now slide the button to turn it off.
In case your iPhone is stuck in an infinite loop and the previous option is unavailable, press and hold the Power and Home button till the screen goes off. Remember to leave both the buttons as soon as the screen goes off and before the Apple logo appears again.
Step 2: Connect the iPhone’s USB cable to your computer but not to your iPhone yet.
Step 3: Now hold down the Home button and while you are holding it connect the USB cable. Keep holding the Home button till you see the Connect to iTunes screen on your iPhone(Screenshot shown below). iTunes will show an alert saying a device in recovery mode has been detected.
Here’s what your iPhone screen will look like once its in the iPhone Recovery Mode.
Read more: http://www.callingallgeeks.org/15018/how-to-put-iphone-or-ipod-touch-into-recove ry-mode/#ixzz296y04ygX
Under Creative Commons License: Attribution No Derivatives
THEN RESTORE THE DEVICE AND SETUP AS NEW. JUST YOU WILL HAVE TO DOWNLOAD YOUR APPS AGAIN(FREE) ETC....
LEAST THE SECURITY WORKS HAHA!!! I also wouldnt get upset, be thankful you found it.

My iPad is connected to my computer, but it still will not download newly purchased apps. It is prompted me to connect to itunes or use a wifi setting (which I do nto currently have). What can I do?

My iPad is connected to my computer, but it still will not download newly purchased apps. It is prompted me to connect to itunes or use a wifi setting (which I do nto currently have). What can I do?

My iPad is connected to my computer, but it still will not download newly purchased apps.
Launch iTunes with the iPad connected to your computer.
Select the iPad under Devices in the source list left side of the iTunes window.
Select the Summary tab from the menu.
Deselect: Sync with this iPad over Wi-Fi
Quit then relaunch iTunes.
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT4557 My new Apple Mini IPad has a message box and is froze and will not let me click OK. The message: iPad Not Backed Up; This IPad hasn't been backed up. Backups happen when this IPad is plugged in, locked, and connected to Wi-Fi.

My new Mini IPad is frozen with a message (IPad Not Backed Up) and does not respond when I touch OK. What must I do next? I cannot find the correct ITunes page to sync IPad to Computer ITunes.

Try this now.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons.

Whenever I click on iTunes store, it just takes me to this huge add to download the new version of iTunes. I have tried clicking the download box and downloading it, but it still will not let me past the add so I can buy music. What gives

Whenever I click on iTunes store, it just takes me to this huge add to download the new version of iTunes. I have tried clicking the download box and downloading it, but it still will not let me past the add so I can buy music. What gives

this is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

I have a older MacBook I upgraded memory two 3 gb from its original two but it still will not let me update from snow leopard to maverick I have plenty of available ram does anyone know why

I believe it is running an older version of maverick it is 10.6.8 but it will not let me update any further . I added 3gb of ram to upgrade from the original 2gb it came with but still no updates are being allowed Does anyone have any idea why this is ? I am sure the criteria for the upgrade is available so I don't know why I can not up date it?

10.6.8 is Snow Leopard.
Run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes (you will need the latest version in order to synch with mobile devices).
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
iCloud system requirements:
http://support.apple.com/kb/ht4759
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

I have an ipod touch 4 gen and i reg it on my desk top then a power surge blew it up so i put i tunes on my laptop but now it will not let me do anything to the ipod can any one help me

i have an ipod touch 4th gen i reg it on my decktop then it had a power surge and blewup so i put itunes on my laptop and now it will now let me do anything to my apps pics or music what can i do i tried to reinstall but that didnt work i dont want to restart because of the pics and video that is the only copy i have now please help me

Is your device recognized by your computer? If yes, copy the pictures and videos as shown in this article:
Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer
If it is not recognized, try this first: iOS: Device not recognized in iTunes for Windows
Disable autosync in iTunes, right click on it in the device list and choose "transfer purchases" to copy apps and other media bought in iTunes to your new library.
Do the same again and choose "backup", to create a manual backup without syncing.
Since your device will be erased due to the new iTunes library during the first sync, you can use this backup afterwards to restore your settings and data.
Set up at least one contact and event on your computer before you start, to be able to merge calendars and contacts.

I have updated Flash Player but it still will not play videos etc. Any clues what i have to do?

I suddenly have troublewith playing videos on Firefox - and have uninstalled and reinstalled but still it will not work.
Any clues what else i need to do?

Which version of Flash did you reinstall? 
IE uses the ActiveX version, where other browsers need the Plugin version of Flash.
Here's the "drill" for installing Flash for Firefox.
1.Download the Flash Plugin version setup file from here: 
[http://download.macromedia.com/pub/flashplayer/current/install_flash_player_32bit.exe Adobe Flash - 32-bit Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

I use a website for my job, and now that I have downloaded the new version of firefox my company website will not accept my password. I have changed to a new password, but it still will not let me in. I can still gain access to site using Safari.

How can I use the new Firefox to access nwapeople.com?

Well, two thoughts.
The battery has completely discharged and will take overnight to recharge, so don't expect much in an hour.
The battery has deep discharged and is now dead. It will never recharge and should be replaced.
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.
The flat fee for a battery exchange is, I believe, $99.00 USD.

I have uninstalled and reinstalled the new iTunes but it still will not work. I keep getting the error mesage relating to MSVCR80.dll, the installation error 7 (windows error 126). I have tried moving and removing the dll files including the QTMovie dll

I have tried uninstalling and reinstalling iTunes 15 times regarding the latest release and still get the MSVCR80.dll and Error 7 (Windows error 126) messages.
I have tried moving the dll filesincluding the QTMovie dll file to now avail. Can anyone please help, as I am sure you all, like me, have thousnads of dollars and songs invested in this system and need a fix fast. Can anyone please help???

Dear avid iTunes users - I have cracked it!!!
The response from Apple/iTunes was extremely poor and did not solve the problem.
I have a look in msconfig and observed which applications/services were running - one of which was the 'Apple Application Support'
So ... I had a look at what was in this folder and found the APS Daemon.exe file causing all the trouble.
So ... I simply deleted the Apple folder found in C:\program files\common files\.
I did a restart and did not get the MSCVCR80.dll or Error 7 (windows 126) error messages.
I reinstalled the current version of iTunes (for the 16th time!)
Hey presto!!!
IT WORKED :-O Woooohooo!!!
So ... to all those smarty-pants boffin-brianiacs out there (apple/iTunes): this is how you do it!!!!!!!!!!
YOU DO NOT NEED TO UNINSTALL ALL THE APPLE/QUICKTIME OR RELATED PROGRAMS - JUST DELETE THE APPLE FOLDER IN THE C:\PROGRAM FILES DIRECTORY.
Nuff said.

I'm having trouble uploading songs to iCloud it says I'm at my limit, so I deleted a bunch of songs but it still will not let me upload and I can't use my genius

I've tried several times to upload some songs with no luck. It startd the match process but seems to stall at step 2. Any suggestions?

You might get better results by posting this question in the iTunes Match forum: https://discussions.apple.com/community/itunes/itunes_match.

My bluetooth keyboard (Macnus 3.0) is recognised by my iMac but will not pair? I have paired it with my iPad using code 8310 but it still will not pair with my iMac. Can someone help please?

My bluetooth keyboard (Macnus brand - bought recently in Thailand)(similar to Mac small keyboard) will pair with my iPad using code 8310,and is recognized by my iMac but will not pair?
There are very scant instructions with the keyboard and no mention of any code (the code was prompted by my iPad).
I have followed the instructions but it still will not pair with my iMac!
Can anyone help please?
My iMac is 20 inch Mid 2007 OSX10.9.1 4GB RAM

Hi All, thank you for you suggestions. I have been unable to find any website for the maker, but have looked at several Thai/cambodian sites incl <http://www.buycoms.com/Article/8435/index.asp> which mentions the keyboard being suitable for tablet or windows. No mention of iMac! although the box is branded to indicate Mac compatable.
I'm thinking that maybe it just will not pair with an iMac.
Ill keep looking for the maker website, which might come on later in the future? maybe?
thanks again.

I have restore my ipone, but after that when i restart it and after selecting language and country. when i conntect to itunes, it display this message. We're sorry, we are unable to continue with your activation at this time

i have restore my ipone, but after that when i restart it and after selecting language and country. when i conntect to itunes, it display this message. We're sorry, we are unable to continue with your activation at this timre

Hello mzpartia,
I found an article from Apple that specifically outlines how to try and troubleshoot this issue. It's called iPhone: Troubleshooting activation issues found here: http://support.apple.com/kb/ts3424.
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.
Take care,
Sterling

HT4113 i have restored my ipod but it still wont work

i have restored my ipod but it still wouldn`t work

Restore to factory settings/new iPod if yo have no done so already. If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

I restored my iphone but now it will not power on fully. The Itunes plugin appears. I plug it in and restore as requested but the phone never restarts like it says it will. I have done this several times now but nothing. Suggestions?

I restored my iphone but now it will not power on fully. The Itunes plugin appears. I plug it in and restore as requested but the phone never restarts like it says it will. I have done this several times now but nothing. Suggestions?

Sounds like time to take it back to Apple for repair.
Allan

TS1538 I have restored my ipad 2 but it still will not let me in. It gives the message iPad is disabled...connect to iTunes

Similar Messages

Maybe you are looking for