TS1538 my iPad is stuck on the connect to itunes screen after updating.
I have seen several post about screen locked on the iTunes connect after updating software. I have tried all these methods. My iTunes does not recognize my device and my device will not turn on so I cannot do a reset. I tried the hard reset by pressing both the home button and the on/off switch and then connecting to my computer. My computer dings like a new device was connected but I cannot see my device in iTunes.
Suggestions appreciated.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.
Similar Messages
-
Since my iPhone 4S was stuck on the connect to iTunes screen after updating to iOS 7, I followed these instructions and restored. But nothing changed! I still have the same picture of a plug with arrow to iTunes.
It is restored now. Thanks for the comment about disabling firewalls - we did that and tried again and it worked.
-
I did the 4.2 update on my iPhone 3g. But after downloading and updating it, the phone is now stuck on the 'connect to iTunes' screen and does not move further. Tried the recovery mode operation also, but everytime in the end, it hangs at the end and shows the ''We could not complete your iTunes Store request. The iTunes Store is temporarily unavailable. Please try again later.' I tried all the usual suggestions of updating iTunes version and updating the Windows updates, but no luck. Even uninstalled the anti-virus. Please help.
It is restored now. Thanks for the comment about disabling firewalls - we did that and tried again and it worked.
-
My iphone 4 is stuck in the 'Connect to itunes' screen after updating to OS7.
I have an iphone 4 which worked perfectly before. I went through the update process to the latest OS and now I can't get it to progress beyound the iphone setup screen. itunes sees it fine and reads it fine but whichever option I pick it goes through the process, gives me all the progress bars etc and goes through the motions of restoring from backup but then it just loops back to the setup screen. Can anyone help please?
Hey MarcoCr,
Thanks for the question. It sounds like your iPhone is currently in recovery mode. To resolve this, you will need to restore the device with iTunes:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
I started to update my ipad but I have an old MacBook and it's really old and I don't have the correct software to update anything. But my ipad is stuck on the connect to itunes screen and wont budge. What do I do?!
Your options depend on which MacBook you have and the version of OS X installed.
To find out: > About This Mac -
My Ipad is stuck on the connect to iTunes screen, I have tried plugging into iTunes but it makes the necessary noise but the computer does not recognise it and nothing alters on the Ipad screen. Have tried various computers and leads and it still does not work. Have also tried the switching off, plugging in to computer and turning on again using the on button and then the home button but nothing works. This happened while I was downloading software update. Please help me.
I suggested several things to GeekyNerdGirl in her first post here. Take a look.
My iPad is in what seems like permanent restore mode after iOS 7.2 update?
It can take more than a few attempts before Recovery Mode will work and you have to follow the steps exactly. DFU mode is even harder to perform correctly beside of the 10 second hold. Don't stop trying. Eventually one of these methods could work for you. -
My iPad is stuck on the connect to iTunes screen
My iPad was given to me from a friend who couldn't get it to work, So Im not totally sure of the steps leading up to the current issue.
Currently the iPad is stuck at the connect to iTunes screen, it doesn't appear in iTunes, not even in DFU mode. I am running Lion and it has yet to even appear in system profiler. I have tried 2 cables, both work fine with my iPhone but not the iPad. I cant tell if it charges or not, the battery is charged for now, and pluging it in doesn't tell me anything. Any ideas? or is it just a shiny paper weight?
Thanks.I would make an appointment at the Genius Bar of an Apple store. Check here to see if it is still under warranty:
Apple - Support - Check Your Service and Support Coverage
However, you do not a warranty for the Genius Bar. -
My ipad is stuck on the connect to itunes symbol after trying to update help?
My ipad is stuck on the connect to itunes symbol after trying to update help?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
my phone is stuck on the connect to itunes screen after trying to recover it to a backup.what should i do???
PLEASE HELP!!!Hold down the Home and Power button to shut off the iPhone. Keep it disconnected from the computer. Then, hold down the Home for 20 seconds. Connect it to the computer while continuing to hold down the Home button. Wait for iTunes to say your iPhone is in Recovery mode. Then, restore.
-
My iPad 2 is stuck on the connect to iTunes screen after trying software update
I was updating my software on my iPad 2. Now it is stuck on the connect to iTunes screen. Help!
That is telling you to connect to iTunes on your computer because now you need to restore the device. Something went wrong when you updated. So connect you iPad to your computer's iTunes and restore.
iTunes: Restoring iOS software -
I was attempting to update my iPhone 4 to the new iOS 7.0.4 via my computer after I plugged it in to create a backup copy and something went wrong before it could finish and I recieved an error message. Now my phone is stuck on the "Connect to iTunes screen". I've tried everything to reset & restore my phone with no luck!
I have:
-Restarted my computer
-Updated iTunes to most current version
-Turned phone on and off several times, waiting up to a half hour before turning on (to be greeted directly with apple logo then the connect to iTunes screen)
-Turned on, turned on and held home button (nothing happens)
-My computer is NOT recognizing my device at ALL! But when I plugged my boyfriends iPhone in, it detected it no problem.
I tried calling my phone from the other phone and it goes straight to voicemail. I am super frustrated! Does anybody know what is going on?I was able to restore my phone!!!
I called Apple and they said there was nothing more I could do. I called my carrier Verizon and was able to get my computer to recognize my device after trying this-
Solution:
After trying EVERYTHING this is the ONLY thing that worked-
I took the USB connector cable out of the USB port it was in, and tried another one on the otherside of my laptop and iTunes was able to discover my phone in recovery mode. My phone was reset and everything is fine ( thank gosh for backup copies!) -
iPod 5g
iOS 8.1
I think it finished updating(can't be sure) but is still stuck on the 'connect to iTunes' screenMagically, my ipod touch opened this afternoon.
Through two weeks I tried several things like push power button for couple of minutes then push power and home button together for a couple of minutes. I replied this for a few times in a day. Also I put charge for 2 days after I firstly recognized my ipod is black out. But for a long time I didn't try charge for a long time (just half an hour etc.)
I put charge at morning today then when I came home at afternoon ( approximately 12-14 hours) my ipod touch was full charged and opened.
I promised that I will write my solution. I'm not sure this is a solution or not but my ipod touch is alive now. -
My iPhone 4 stuck in the "connect to iTunes" screen after trying to update to iOS 7
Hey guys.
So i have a pretty big problem here. Today after a little bit of work I updated my iPhone 4 to the new iOS 7. I went to bathroom at some point, while my phone was updating, and when i returned the screen of iPhone showed the "connect to iTunes screen" and no matter what I did, it just stayed there. iTunes doesn't recognize my phone anymore, doesn't matter how many time I plug it in and out. I tried this thing: http://support.apple.com/kb/HT1808 ,but it did not worked. I tried reinstalling my iTunes, but it did not work either. If the little things matter I left "lauch iTunes" box unchecked after reinstallation. Any help apriciated guys, im desperet here.YESSSSSSS HUGE PROBLEM!
Iphone 4 downloaded ios 7 i hit the install button and the phone entered recovery mode and hasnt woke up since, tried tiny umberella and it wont kick it out of recovery mode. Itunes recognizes it in recovery mode, hit update restore, after the update nothing pops up or happens, and right back to square one like i never even updated or restored.
Help pleaseeee -
My iPhone is stuck on the connect to iTunes screen after I tried to reboot it, help!
HELP! I tried to reboot my iphone because it was being a bit slow so i held down the power and home button at the same time for a bit and it rebooted successfully but the connect to itunes screen appeared and i have been worrying to **** as to what i should do, i do not want to delete any of my stuff, help me get rid of this please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! i'm really worrying !!!!!!!!!!!!!!!
You need to Download ios 7.0.2 ipsw file for iphone.If you kindly suggest your iPhone 5 model written on back of iphone eg Model A1429 or A1428 and i shall give you the download link for the software.
-
My iPad isn't acknowlegded, but my iPhone connects to iTunes no problem. Is this a driver issue since my iPad has never been connected to my PC?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
IMac Duo shuts down when trying to encode a DVD for burning.
Last night my Imac Duo 17" with one GB of memory shut down and wouldn't eject a DVD after encoding and burning a DVD with iDVD. The upper LEFT hand corner of the iMac was very hot to the touch. I checked the temperature with CoreDuoTemp before it shu
-
I need to know how to set up my wife own account instead of under mind account?
-
Iphone 3G recovery mode; the iPhone cannot be recovered: unknow error 1604
Hi I was recovering my iPhone 3G at iTunes after creating a back-up. When I wanted to recover (and update to OS 3.1.3. from 3.1.2) iTunes is turning the iPhone into recovery mode, but after a few minutes the phone is keeping getting the message the i
-
How to put SPACE thousands separator
Hi there, I'm thinking how to format following numbers, eg: (integers) 150000 2000000 and I would like to export them as CSV file from sqldeveloper to MS Excel and displaying them like => (with space separator) 150 000 2 000 000 without Excel (format
-
Update for MIC - Qn / Ql for new plant
Dear Experts, I need one clarification. we have created one new plant in quality inspection side, till not created any code group and selected set for the particular new plant. But already having the code group and selected set for the existing plant