TS1717 Hi, my iTunes application is not connecting to the iTunes store. It is coming up with the following error message "we could not complete your itune store request. An unknown error occured (11222)" Can you please assist?
Hi, my iTunes application is not connecting to the iTunes store. It is coming up with the following error message "we could not complete your itune store request. An unknown error occured (11222)" Can you please assist?
Hi Laura-Wedders,
Thanks for visiting Apple Support Communities.
On August 7th, some users may have been unable to make purchases from the App Store, iTunes Store, Mac App Store, or iBookstore. Apple worked quickly to resolve these issues, however you may have experienced them.
To check the current status of these systems please see:
Apple - Support - System Status
http://www.apple.com/support/systemstatus/
If you are still experiencing issues, you may want to troubleshoot with the following articles:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
All the best,
Jeremy
Similar Messages
-
iphone 3gs shows activation required, hooked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?
Instructions to get the phone back working temporary.. till there is a real fix.
1. turn off the phone
2. fire up iTunes
3. press and hold the home button, plug in the cable, hold till you get to see the recovery mode
4. iTunes will the allow to choose restore the phone back to 5.0.1 ( no other choice)
5. iTunes will then ask you to choose which previous backup to would like to recover.
(note: please do not reboot your phone unless necessary, i realize at times after reboot, it goes back to sq1) -
Can you please assist me in increasing the speed of my server
hai friends,
i am using 4.7ee on windows Can you please assist me in increasing the speed of my server.....nice hint, but not usefull.
how you are going to set virtual memory???
the maximum virtual address space of a process depends on the architecture (32/64 bit) and - if 32 bit Exectuable - on
- if running on 32 Bit Operating System /3GB and /userva boot.ini options
- if running on 64 Bit Operating System: max 4 GB
as long as your application is able to allocate enough memory your pagefiles are sized sufficiently. If you add physical memory, you normaly can decrease the pagefile size.
1 GB physical is much too less. Depending on the number of users on the server and depending on the SAP Release I would at least recommend to use 4 GB.
regards
Peter -
Can you please assist me with removing some itune charges?
Can you please assist me in getting credit on numbeous itune charges? I have spoken with 3 representatives that expressed that I would be refunded for this charges. I was told to be patient because the process would take 7-10 days. It have now been over a month and I have only been recieved credit for a portion of the charges.
We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
If you haven't been refunded for all the charges that you were told that you would be, then contact iTunes Support again (and if you have case numbers from your original contacts with them then include them in your message) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
Using Windows 8.1 with Directx11, when I lauch Photoshop Elements 12 Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the latest version, Directx11, as verified by running dxdiag.
Maybe you need to enable Direct Play under Legacy Components in the Turn Windows Features on or off dialog.
1. Right click on the windows start Logo on the taskbar, select Control Panel and click on Programs
2. Under Programs and Features click on Turn Windows Features on or off and then under Legacy Components enable Direct Play -
Having a problem when scrolling through one clip: a different clip scrolls through point and time simultaneously. Can you please assist us?
First question: this is a Captivate forum, are you sure that you have a Captivate problem (with cpvc or an imported video)?
-
i just bought the monthly package of lightroom and photoshop cc. I can't seem to find it under the apps on creative cloud - can you please assist me with this.
You can right click the tab and choose "Close Tab" to close a tab.
Some menu entries are hidden by default and only appear if you use the keyboard to open the menu.
You can see the difference if you use Alt+F or Alt+B to open the "File" and "Bookmarks" menu and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by pressing Alt or by pressing F10.
Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily. -
Can you please assist me with downloading Flash Player in my Apple 13" Mac Book Laptop Computer.
Can you please assist me with downloading Flash Player in my Apple 13" Mac Book Laptop Computer.
Moved discussion from Downloading, Installing, Setting Up to Installing Flash Player.
-
I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes
Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H. -
Windows error message "Setup could not read the CD you inserted..."
I partitioned my Macbook HD using bootcamp assistant and allowed 32GB for the partition. Then I tried installing windows using the assistant. I only get as far as verifying the windows CD (not far as which file system to use FAT32 or NTFS). Then I receive the error message, "Setup could not read the CD you inserted, or the CD is not a vaild windows CD." I am using the Windows XP Service Pack 2 version - not an upgrade. Also I tried booting up straight to the CD but that did not help either. Any suggestions?
Please disregard my question. Although my Windows XP Pro documentation and folder did not say upgrade I just looked at the CD for the tenth time and just saw Upgrade printed on the CD. I'm not making excuses but the holographic images make the CD a little hard to read. Sorry for the trouble. I guess I will be going out and buying the full version now.
-
I have a 2013 iMac, with OS X version 10.8.5. Have been trying to download OS X version 10.9 (OS X Mavericks) without success; error message "we could not complete your purchase, the product distribution file could not be verified, etc". Please help; TQ
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I have a Dell Inspiron with operating system Windows 7, I cannot access itunes store.
Error Message: "We could not complete your itunes store request. The itunes Store is temporarily unavailable"
Have been getting this for over a month now. I can access the store from all my apple devices but not our main computer the laptop?Hello suefromid
Start your troubleshooting with the article below to get the iTunes Store working again.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Regards,
-Norm G. -
Error message: IPod could not be restored. An unknown error occurred (1603)
After I upgraded my ITunes and tried to sync my IPod touch I got this message.
Error message: IPod could not be restored. An unknown error occurred (1603)
Hi rtpeter1 ...
Error 1603: If you receive this error and the iOS device is not automatically placed into recovery mode, it may be necessary to do so manually. Refer to iPhone and iPod touch: Unable to restore for steps on placing iPhone into forced recovery mode. Also, remove the IPSW and attempt to restore again. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user.
From here > iOS: Resolving update and restore alert messages -
Running 10.6.8 and can't upgrade to Yosemite. Receive this error message "We could not complete your purchase. INSTALL_ERROR_DISTRIBUTION_SIGNED_BY_APPLE"
i have the same problem too, you didnt find the answer yet???
-
I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service", when I checked on my network settings i was not able to find the cellular data network tab ( where we use to input APN manually). i even tried to restore my iPhone to its factory settings, Still it remains the same. i cant able to connect to Internet using cellular data. help me...Plz..
Where did you purchase it from? There are lots of iPhones sold as "unlocked" which are carrier locked phones that were hacked and are not officially unlocked. These phones are subject to re-locking to the original carrier, particularly when updated.
Maybe you are looking for
-
the problem is the MB doesn't seem to be disabling the onboard video like it should when i attach an expansion card into the agp slot (using an MSI G4MX-TD8X). i've tried everything i can think of to get the dang thing to post... or at least show it
-
How to Optimize SCXI 1600 for speed with Thermocouples
I'm working on a data acquisition system for my engineering firm and I'm trying to find a way to use our new thermocouple system as fast as possible. The requirements for the DAQ process are: Read 32 voltage channels from a PCI-6071E card Read 32 the
-
So I tried to partition my hard drive and I got the following error message: +Verification failed. This disk could not be partitioned.+ +Use Disk Utility to repair this disk.+ And so I continue on to Disk Utility and I try to verify the disk and I ge
-
Remove white background on TIFF files
I have some TIFF files with white background. What is the best way to get rid of that white background without losing quality (ie. tiny white stroke on the objects). I see in the channels tab that I have a pretty decent mask in there but I don't actu
-
Is there a flash for the iSight camera on IPad 4th generation?
Is there a flash for the iSight camera on IPad 4th generation?