TS1717 my itunes just quit opening. and says it can't recognize my ipod. do i want to restore factory settings? ***. i don't want to lose all my music help
i was updating my nano ipod. deleting tunes making new playlist. i got a warning the day before that i didn't have tunes checked and they wouldn't sync. i didn't do anything about that since i was syncing at that point. then today i was doing some maintance on my itunes. and when i tried to sync it said it recognize my ipod which i have been using for a year. i tried checking all the songs and it came and said i didn't have enough memory to store. they were already stord so what the hey.?then a question comes up and says do i want to restore factory settrings? i'm afraid to do anything i don't want to lose my music . but now i can't even open my itunes. what to do and what did i do to break my itunes. help?i'm not a novice but not that savey on all things computers so make it simple please.
and thanks for any help.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock
Similar Messages
-
I click on itunes but doesnt open and says send error report or dont send
i click on itunes but doesnt open and says send error report or dont send
You will need to provide more details as we cannot see your computer screen. Does this happen every time you launch LabVIEW? What version of LabVIEW are you using? What version of Windows? Does LabVIEW crash? If so, what were you doing at the time it crashed?
-
My itunes won't open - it says: 'The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem' I have tried un-installing then re-installing itunes and I still get the same message?? Can anyone help?
I have the exact same problem.
I have uninstalled the program, rebooted and downloaded the update again. Same problem, same message.
Please, where is that missing MSVCR80.dll? I don't remember misplacing it.
I'm a Windows 7 user. -
Itunes will not open, it says R6034 an application has made an attempt to load C runtime library incorrectly, then it says service apple mobil device failed to start
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
My iTunes won't open and I am getting message "the file iTunes library .itl"cannot be read because it was created by a newer version of iTunes. Anyone have a suggestion?
I don't know why this error occurs, unless you have attempted to downgrade iTunes.
This method should get you up and running again.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
try to open itunes on my computer and get messageprogram can't start because MSVCR80.dll is missing from computer and a windows error 126 comes up
Hi arw8669,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I downloaded version 11 on itunes and updated my ipod to os6, when I try to open itunes now, it says it downloaded incorrectly and won't open. It says to reinstall itunes. Will I lose my whole music library if I reinstall itunes?
you will not loose your content at all. It is still sitting in your hard drive even if you uninstall itunes.
Once itunes will be reinstalled , it will re-sync your stuff on your hard drive -
i have tryied to download it over, restart it and it still wont come up
When you are attempting to do this restore you did connect your iPhone to your computer and then did the restore using the iTunes on the computer?
-
Numbers file won't open and says ' "filename" can't be opened'
I use Numbers for all my spreadsheet work and have an issue opening just one file which was last opened 26 Jan 2014. All my other files open ok and I have tried both versions of Numbers incl 3.1. All I get is a quick pop up notice saying ' "filename" can't be opened' There is no explaination and it is odd as I can open all my other Number files. I did have Numbers quite on me unexpectedly when I had this file open so could it be corrupted? This file was stored on iCloud so I could work on it on my iPad as well as my MBA.
Suggestions for a fix or advice would be greatfully received.Make sure that you are properly signed into iCloud and that Share Documents is enabled.
Jerry -
I updated to iTunes 10.2.2, and now it doesn't recognize my iPod Touch!
I updated my computer to Snow Leopard, and I was prompted to update iTunes to 10.2.2. Okay, did that. Now iTunes doesn't recognize my iPod whatsoever! But my computer does as a whole: i.e., Aperture automaticaly opens as it usually does when I plug in my iPod.
So this is great. And there's no bug fix; I've googled for the past hour now. Is anyone else having this issue and is there a fix? Because for now, I can't update my iPod at all!Have you seen this article yet?
http://support.apple.com/kb/ts3540
If nothing else, try upgrading to iTunes 10.3.1.
B-rock -
My itunes wont open what do i do?
what's the precise text of your error message please, matti? (There's a few different ones I can think of that you might be getting.)
-
iTunes randomly stopped syncing with my iPod and now I need to uninstall/reinstall.
How do I do this and will an uninstall delete all of my music/movies/podcasts/etc.?
Any help would be greatly appreciated.micron12
Hi I had a simular problem with my iPhone 4 and iPad 3 and found that the USB connection on the computer was at fault so I moved the connection to a USB port on the Mother board.This curred my problem,see if ti works for you.
Windows 7 and windows XP -
Can I go back to an earlier version of Firefox, if I can't use my "Userscripts" on this one?'''bold text'''
Do you have the "Plus" version?
[http://userscripts.org/scripts/show/104301 DOA Power Tools Plus for Greasemonkey] -
I have an old i tunes library but i don t know how to access it. im trying to sync my ipod with my new itunes library but it wont let me. how can i copy the songs off my ipod to my new library.
You can transfer itunes purchases:
File>Transfer Purchases
Maybe you are looking for
-
Single line item for multiple line item payment.
Hi I have booked the 3 vendor invoices (in FB60) for a single vendor. Now today i paid (with F-53) all the three invoices together. One payment document number was generated. However when i saw the vendor line item, i saw that three debit line items
-
Connection to btinternet account through Mail
I have a btinternet account which I have been able to access through 'Mail' whilst traveliing in the US and UAE. on 13th June Mail stopped being able to connect to me btinterent account. I have tried to reload the account using the procedures describ
-
Printing "*" in amount fields
hi folks, my report is displaying * in the amount column , but when same query is checked in RSRT it is showing correct values. please could someone help me in this reagrd. help is highly appreciated. regards, axel
-
Changing divs with the fade effect
Hi there, I have a problem finding out how to change two divs using the fade/appear effect. I will describe my idea of how it should work: When you click on a link in the menu, the content wich is showed should fade. Then a new div should appear. My
-
My contacts have just totally disappeared. Can anyone help please.?
My contacts have just totally disappeared. Can anyone help please.? I'm using iPhone 4S