TS1811 Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows
Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above "
iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
"....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows 4 same
Archived - iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
Products Affected
iTunes 7 for Mac, iTunes 8 for Mac, iTunes 9 for Mac
This article has been archived and is no longer updated by Apple.
Symptoms
After installing the Mac OS X 10.4.9 Update, iTunes may be unable to properly authorize your computer to play your iTunes Store purchases.
Resolution
The following steps will delete your network preferences. Most broadband connections do not require any special settings to connect, but if your connection does or if you are not sure, please contact your ISP or network administrator for further assistance.
Important: You must be logged in as an Administrator.
Click the Finder icon in the Dock.
Choose Go to Folder from the Go menu.
Type /Library/Preferences/SystemConfiguration
Click Go.
In the Finder window, locate the file named NetworkInterfaces.plist.
Drag this file to the Trash.
Restart the computer.
Once your computer has restarted. You will not be able to connect to the Internet. Now you will need to refresh your network settings to be able to connect again.
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
To refresh your network settings, from the Location pop-up menu, choose New Location.
Type a name for your location and click OK.
Click the Apply Now at the bottom right to accept the changes.
If your network connection requires any special settings, you will need to put them back in at this point. Once you have made these changes you should be able to connect to the Internet again and authorize your computer to play your iTunes Store purchases.
Similar Messages
-
I cannot close or import or any function to iphoto. I have been getting the same message for many days "Photos are being imported to the photo library. Please wait for import to complete." I do not know where the photos would be importing from. How do I get it to proceed?
After Force Quitting, as LarryHN recommended,
Select the iPhoto Library in the Finder. By default it is in your Pictures folder.
Ctrl-click or right-click the iPhoto lIbrary. Select "Show package contents" from the panel, that will pop up.
Look for a folder named "Importing" or "Import". Remove this folder, but don't touch anything else.
Then launch iPhoto again.
If iPhoto now is working again, check the folder you removed, if there are any photos that you want to keep and save them. -
I have been on the same problem for 2 days now.... it has become URGENT
==================
CLIENT SIDE
==================
try
srvIntrface = (MyServerInterface) Naming.lookup("rmi://"+server+":1099/Interface");
}catch(Exception e){System.out.println("clientForm, lookup: Error getting the remote service");}
byte[] fileData = srvIntrface.getFile();
This is how i connect to the interface on the client side... AND then get the file
server variable - is the ip of the remote machine
==================
SERVER SIDE
==================
MyServer mySrvr = new MyServer();
Naming.rebind("//localhost:1099/Interface",mySrvr);
this is how i bind the interface to the server
================
PROBLEM
================
i am working on a LAN.... when i run the above codes on one of the machines e.g. machine1.... the machine1 works fine and can get the file from machine 2. but when i run it on machine 2 and try to get the file from machine 1 following exception occurs
Connection refused to host: localhost; nested exception is: java.net.ConnectException: Connection refused: connect
Please helpThank you for your responses....
i do run the registry on both machines...
as such
"start rmiregistry 1099"
plus i system.out the variable "server" with your suggestion.... it gives out the correct ip of the machines to be looked up!
e.g.
if i want to connect to 192.168.1.2.... the server variable is gives out the correct ip...
i have been trying to solve this problem for a very long time... but can't seem to find a way around it...
this is how i run my server and client
java -Djava.rmi.server.codebase=file:/C:j2sdk1.4.2_04\bin/ -Djava.rmi.server.hostname=localhost
-Djava.security.policy=java.policy MyServer
java -Djava.rmi.server.codebase=file:/C:j2sdk1.4.2_04\bin/ -Djava.security.policy=java.policy MyClient
my policy file is: just wanted to be very relaxed
grant {
permission java.net.SocketPermission "*:*","connect,accept,resolve";
permission java.net.SocketPermission.AllPermission;
permission java.security.AllPermission;
permission java.io.FilePermission "c:\\j2sdk1.4.2_04/bin\\-","read,write,delete";
Plz help -
the podcast app is not fixed still wont download,did not find any solutions with anyones comments,they all have the same problem with this app.So how can you say the problem is fixed,get someone who knows how to really do something so it is not a recurring topic of frustration!!!!!
You might get more replies to this (but not from Apple, who you will recall, do not monitor these discussions) if you had posted in the Podcasts for iOS discussions, but never mind. At least in this post you've mentioned that your problem is with the Podcast App, something you didn't mention in your previous post. Consequently, my comments were based on "problems downloading Podcasts", not "problems with the new Podcast App".
(I don't use the new Podcast App, since I cannot install iOS 5 on my Touch. So I stick with the older method of listening to Podcasts on my iPod.) That said however...
It cannot have escaped Apple's attention that the new Podcast App has not been well received. Although these discussions tend to focus on what's wrong rather than what's right, it does appear that the App hasn't been well thought out.
In particular, the Auto Play feature, which - once an episode has finished playing, the "next most recent unplayed episode" will begin. Now, maybe I'm wrong but to me that means that it plays the Podcasts in reverse date order, so episode 19 will play after episode 20 and episode 18 after ep.19! That is how the iPod Classic plays Podcasts by default and the Classic forum is littered with posts from people who think this is barmy. (I think it's barmy too!)
I use an iPod Touch as well. Although not perfect, playing Podcasts on the Touch is far easier than on a Classic.
You are unlikely to find any "solutions" to the issues with the Podcast App, because the "solution" is for Apple to redesign it.
If you are assuming that the update of 25th july is a claim that it's fixed... oh dear! I notice that the App views, shown in the Store, still include that "tortoise and hare" screen with what appears to be the transport mechanism for a reel-to-reel tape deck. That alone tells me there is no real improvement to the App. It really is the worst graphic Apple have ever produced! I'll be surprised if anyone under 35 recognises that graphic as a reel-to-reel tape deck.
Actually, I have a question for you.
If you have the Podcast App installed on your Touch, does that mean that the previous method of listening to Podcasts has been removed from your iPod, or can you still access them in the Music App? If you can, abandon the Podcast App and use the old method. If not, please warn me in order that I don't purchase a new iPod Touch until Apple fix this!
Sorry I can't be the bearer of more positive news. -
This is my second power cord and it is now not charging either. Is this a coincidence or is my computer causing the power cord failures?
Hi T,
I would bring it to an Apple Store or AASP to have it checked out. If it's under warranty, it's their problem, not yours. -
I'm a retired IT professional desiring to assist a friend who owns a small business who recently experienced very malicious attacks on her computers from unknown parties operating anonymously on the Internet. Because
of her lack of preparation for such events, her future ability to continue to conduct her business was seriously threatened. The incident revealed, to my friend, the need to be prepared to deal with spontaneously occurring problems that create suspicious conditions
that arise with modern computer software before they can be analyzed in a sufficiently comprehensive manner to have an opinion regarding the appropriate course of action for obtaining a permanent remedy. In that, the ability to quickly react on the basis of
only suspicion is the goal.
I want to recommend an approach that involves maintaining an offline image of an operational system that is capable of running any of her computers. This image needs to include all of the software required to run
her business. In that, it is not limited to the operating system. This single image could then be used to restore any computer to a known reliable state should the need arise. This technique will also insure that each computer has sufficiently similar capability
to allow them to substitute for each other. Insofar as image restoration is itself an operation susceptible to causing unacceptable business delay I'm also recommending that each of the identical computers (i.e., from a hardware perspective) operate in a multi-boot
environment where a virtually offline backup can be instantiated via a simple reboot (i.e., an operation that all users of the Windows operating systems turn to when strange behavior is first observed). My intention is to limit the cloned system (i.e., partition
or C: drive) to the operational software. The business data along with storage for temporary data will be isolated on other partitions (i.e, mounted with other drive letters) accessible by each instance of the software eligible for multi-boot operation.
This kind of operation is something that I know how to setup on older versions of the Windows operating system. However, Microsoft has now dropped support for all of those operating systems and my much more limited
experience with the currently supported operating systems reveals that changes to the boot process will necessitate making changes to the specific preparations needed to build such an environment.
Before recommending that my friend replace all of her computers with new ones, that includes paying for new operating system (i.e., Windows) licenses, I need some assurance that the new operating systems are as
good as the old ones in this respect. These need to be relatively inexpensive desktop computers and we're only talking about a few of them. Let's say fewer than half a dozen. My friend is a sole proprietor and even though her business has become completely
dependent on what was once called personal computers she must operate on a fairly tight budget. This especially includes the budget for technology.
The articles I've been able to find on the Microsoft support websites seem to treat multi-boot as a situation where someone is running different versions of possibly difference operating systems whereas my need
to produce a single image that will both run on multiple computers as well as multiple partitions on the same computer. I'd appreciate finding some technical advice that applies to building such a system using a supported version of Windows.I tried the image creation/restoration described by Jared. I don't think it makes much sense to rely on an operational system to do such a restoration therefore I opted for method 3 which involves using a "System Repair Disk". My first
reaction is what a crude tool. The image creation process had no trouble putting the image on a simple network share. However, it appeared as though the restoration couldn't even connect with the device. I then copied the files to a USB drive.
In this case the repair disk said it couldn't find the files even though they were there. It offered no mechanism to even look and see what was there. It appears as though it will only find the image if it is located in a folder by the certain
name used on creation and it is in root directory. Not very handy.
As ugly as all that was when we finally come to the point of making the restore it looks like the only option is to restore the entire disk, which in my case would mean also restoring both the windows partition and the recovery partition. This just
isn't what I want to do. It is also something I wouldn't even consider doing unless it was the only possible way to recover from a failed hard drive.
In summary, unless I've completely failed to notice how it works that just isn't going to work.
I hope there is something better than this. What about WinPE and ImageX?
Absent anything useful from Microsoft it will be necessary to try using other software. Time to try Acronis! I guess. -
Windows Operating System not being monitored
I have installed some of the management packs (advanced workflow module events, event log provider events, performance monitor porvider events, registry provider events, script and powershell provider events, service monitoring events, vmi provider events) and
there are no overrides. I still cannot get the windows operating system to get monitored. I have restarted the server and still none of the windows operating systems are being monitored. Is there a certian management pack that i need to install
for the monitoring Windows Operating Systems. dktoa is correct, just because you have the Agents installed does not mean that anything is actually being monitored. In fact, all that will be monitored is the Agent itself being able to communicate with the Management Server.
However, I would suggest to ensure that all of your Agents are reporting back as Healthy (aka green), before you import any Management Packs. That way any issues that may occur can be directly linked (and thus troubleshooted) to the MP.
Additionally, you have not mentioned what Windows OS you are trying to monitor. More than likely it is a Server OS; in which DKTOA has provided the link for the Windows Server Operating System Management Pack.
However, if in case it is a client-based Windows OS (i.e. XP, Vista, 7) than that Management Pack can be found here: http://www.microsoft.com/en-us/download/details.aspx?id=15700.
You should note, that there currently is no Management Pack for Windows 8; though it is due out soon. -
i upgraded my firefox to 3.6.4 but when i add some add-ons it tell me that i have 3.5.8 & i have to upgrade it ... i reinstall 3.6.4 several times but still the same problem ...
== 2-3 days agoLook at the highlighted copy of your Help > About Mozilla Firefox image attached below this message.
<u>'''Reset general user-agent'''</u>
-In Firefox, type '''about:config''' in the URL bar and press the Enter key.
-If you see the warning, accept it (promise to be careful).
-Filter = general.useragent.extra.firefox
-Right-click that preference and select Reset
-Then restart Firefox (File > Restart Firefox) -
i have an ipad 2 when i open anything that i downloaded such as games or applications it doesnt open i dont know why i tried to turn it off and turn it on again but the same problem any help plz?
If it's just the apps that you've downloaded from the App Store that you are having problems with, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
-
Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB" (usb device tree)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x18
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x19
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f -
I upgraded to 2 - i4 phones with 2 different phone numbers. I can sign on to iCloud on 1 phone but never on the other. I have changed my my password twice but no matter what I do, I still have the same problem. I keep getting a message "Verification Failed The request timed out" no matter how many times I try to sign on it always times out. Before I upgraded to the i4, I had a i3GS and had the same exact problem. Does anyone have any ideas???
Firstly, go to http://iforgot.apple.com and sign in with the ID you use for iCloud. A new password will be sent to your associated email address.
If that doesn't work, for example because it's going to an address you can't access, then you will have to contact Support. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password' and click 'Continue'. -
What are the pros and cons of using people keywords, given that my catalog is already up to date with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular keyword in the same photo?
What are the pros and cons of using people keywords, given that my catalog is already up to date with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular keyword in the same photo?
-
After downloading iTones 10.5.1, the artwork matchs the song that is playing on my iMac but the artwork does not sync properly on my Apple TV. The artwork lags one cover behind. Is anyone else experiencing the same problem.
I think it is just a bug, but it in very frustrating. I was using just now for about an hour and suddenly the correct artwork appeared for what was playing....but then all went wrong again!!
Apple, please, please issue a patch for this. It surely cannot be too complicated to correct. -
as above can somone please explain if they are having the same problems ????
However after part of the Itune update completed a message came up on the screen
saying "The feature you are trying to use is on a net work resource that is unavailable.
Which particular .msi file does the message go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.) -
how do i retrieve photos that have been deleted from my ipod touch if i have windows operating system?
Yest it will restore photos deleted from yur iOd probvide that the photos were taken before the the last synce/backyp was made. Make syre yu have automatic syncing turned off (Itunes>Preference>Devices>Check the box that says prevent auto syncing when connected). Otherwise when connected, a backup that reflects the deleted photos will be made and will replace the previous backup.
Maybe you are looking for
-
Connecting MacBook to Internet - what do i need
I want to buy a new MacBook -- does it come with a wireless card or do i need to order it separately? I don't see any info on the spec sheet saying it has one.
-
Report, Make a linkage group for two pages each page has a Repeating frame
I Have two pages. And each page have a repeating frame inside a main frame. And two pages have a relational data. So, I should to make a linkage group for this two page. In my case, PAGE 1. *M_1 Main frame start R_1 Repeating Frame start Personal Dat
-
This method is exactly how I'm trying to get my music on my new iPod touch, it starts downloading but then stop and says unable to download at this time. What the **** is going on ?
-
Yesterday i shut my computer down like usually, since then only my sister has been logged in who claims she has not been doing anything but browsing (and her user is not in the wheel group anyway). I also have not updated my system yesterday. When i
-
Which Oracle products should we use?
We are looking to build, from the ground up, a site that is roughly a combination of www.kudzu.com and www.accessatlanta.com. Which Oracle products would help us best develop, test, and implement a similar solution. The primary confusion for me is wh