TS1875 when trying to turn off compatibility mode on my itunes, i dont have a compatibility tab after right clicking properties. Can any one help
When trying to turn off compatibility mode on my itunes i dont have a compatibility tab after right clicking properties. Can any one help???
Hi Roger
Thank you for your reply.
My original feed is: http://casa-egypt.com/feed/
However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
Is there any way to change the feed in itunes? The only feed I have now is http://feeds.feedburner.com/CasaEgyptStation
I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
I know that I missed things up but I still have hope in working things out.
Thanks is advance.
Dina
Message was edited by: dinadik
Similar Messages
-
When trying to turn off iPad3 the red slide does not appear
When trying to turn off the ipad3 the red slide bar never appears when holding the home button down
That's because you DON'T hold the home button to power iPad down. You press and hold the power button on the upper right hand corner of the top of your iPad.
-
when i was trying to update my iphone 4s from 6.1.4 to ios 7,its asking to change the media sync options,how can i change that option,can any one help me.........?
I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
Thanks very much for your feedback. -
my phone suddly switched off and now its not switching on can any one help me when it swithch off my phone battery was full.
Which apps do you open acouse iphone switched off? You can try to reset iPhone.
-
hi my account was locked for some security reasons and i forget the securicty questions and when i am trying to reset my password through email i am not gettig mail to my id can any one help.
<Edited by Host>Have you checked Spam? I have noticed recently in my Gmail that Google sends some mails from Apple to the Spam folder.
<Edited by Host> -
TRYING TO DOWNLAOD DIGITAL COPY OF PROMETHEUS ONTO ITUNES. KEEP GETTING AN ERROR MESSAGE OF 5000. CAN ANY ONE HELP?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
as title can any one help me thank you
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?
jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
Most of the projectors I have used support a 1024X768 res.
Youcan also try a pram reset if it still does not detect.
Leave theproctor connected and powered up, power down the MBP.
Power back up the MBP and hold the following keys before you hear the start up chime:
Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times. -
I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items I want to copy to those devices but it won't work. I also have tried copying and pasting those files onto those devices too but that doesn't work too. Can any one help?
Hi BobRz
Thanks for you suggestion but it didn't work - are there other ways for solving this problem? Or is it because my files that I want to copy and paste onto my hard disk etc are too big? (However there is space on my hard disk and it works on a PC) -
I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me as i just have to use it for couple of days till i get my mac book back from service. Can any one help me on this.
You are welcome, ameronweb.
To elaborate a bit, you may come across offers of a new/unopened/unregistered version, which is the simplest case (you would need a guarantee). Other cases require much detailed information (and a guarantee).
If upgrading to 10.6.8 or higher is an option, you could use CS6. -
My Iphone 4s reciever is not working properly, when i call someone from my iphone 4s. can any one help me how to solve this problem?
You might like to define "not working properly".
-
what a crock of crap i tunes is followed instructions to get music off i pod on to new laptop lost 5.2 days of music can any one help please ?
The new Apogee Duet for iPad and Mac, is compaible with iOS devices and includes a USB Midi input. This sounds like the perfect solution for your workflow.
-
I have new I pad 2 and when I get connected to iMac I can't find it detected in I tunes can any one help me and i am new to I pad
If it's not showing on the left-hand sidebar of your Mac's iTunes (if you are on iTunes 11 then you can enable the sidebar via option-command-S) under Devices then see if this troubleshooting article helps : http://support.apple.com/kb/TS1591
-
I have Mac OS X version 10.5.8 and so im wondering what is the next step i need to get. i have tried to get snow leopard and other things and not having any lukck . can any one help me out pls.
If your Mac meets these requirements:
http://support.apple.com/kb/SP575
then you can order a Snow Leopard disk and install it.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Ciao. -
my Iphone 4S is stuck in DFU mode and its not responding connected to Itunes for a restore. I keep getting a 3194 error and 9006. Can any one Help?
What type of jailbreak was used on it?
Maybe you are looking for
-
I have a new MacBook Pro and used the tool to transfer information from my HP Computer to the MAC during set up. THe size of the disk space used on the HP was about 200GB. Now I have 400GB used on the MAC. I have added up all the folders and applicat
-
Hello.Anyone knows if there is possible to build using VSS an end-to-end shortwave (HF) radio channel ?I've read a lot but I couldn't find a similar example to make an idea.Some indications would be helpfull.Thanks
-
How to set encoding with xmldom ?
Hello ! I have to build an xml file from a query. I need to have : <?xml version="1.0" encoding="ISO8859-1"?> on the first line. I know how to set the version --> xmldom.setVersion(doc,'1.0'); ... but I don't know how to set the encoding. Is there a
-
Airport dropped after awoken from sleep mode
i just started using it in sleep mode instaed of full shut down, when ever i come back i get an error saying the airport network cant be found orsomething, and it takes like 5 minutes to get it to find it even w/ the airport 2 feet away...
-
I used the following command to enable the toolbar in the screen sharing application. defaults write com.apple.ScreenSharing \ 'NSToolbar Configuration ControlToolbar' -dict-add 'TB Item Identifiers' \ '(Scale,Control,Share,Curtain,Capture,FullScreen