TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the
Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?
Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.
Similar Messages
-
I just bought aperture and downloaded it from app store. when I try to open the app I get a warning message that says: There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”. The only option the is to quit. What is wrong?
Hi,
not sure what the problem might be, but you can try the following:
While pressing ALT+CMD on the keyboard, click on the Aperture icon in the dock: Aperture then opens in a special "recovery mode", and you're prompted to choose what kind of repair you need: Repair Permissions / Repair Database / Rebuild Database
Considering the situation, I'd recommend you to try "the "Repair Permissions" option first.
If that isn't enough (and it may well be the case), then go straight for the "Rebuild Database" option; it's a non-destructive opration anyway, but since you've just installed Aperture you shouldn't have anything valuable in the default library...
NOTE: if you do have some pictures in the library, instead, do a backup first! Time Machine is your friend
Another option would be to launch Aperture while keeping only the ALT (option) key pressed: Aperture will ask you what library you want to open, or you can choose to create a new one from scratch.
Good luck!
Corrado -
When opening Aperture I get Warning that says "There was an error opening the database for the library “~/Desktop/Feb 12, 2011.aplibrary.” That's it. The program does not open at all. I'm concerned that my pictures may be lost. Does anyone know how to deal with this Warning?
Might just need to rebuild the library...see this link:
Aperture 3: Troubleshooting Basics -
Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." Even after closing and reopening the program, the print command is greyed out so I cannot select any printer. This also happens with a Brother laser printer. Both printers will produce a test page out side of the Adobe product. Help!
I cannot get any help either. I get the message "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." I have reinstalled all drivers, powered off/on all printers (2 of them - a Brother HL - 4040cn and an Epson Stylus Pro 7890 - which all worked fine until this morning). There appears to be no path to a solution. I have read all the forums and tried about 20 different suggestions all to no avail. Reboots, changing cables, reinstalling printers and drivers and Photoshop CS6 - ALL TO NO AVAIL. On a macbook pro retina with 10.10.3. This issue is out there and some get solutions - but not all - that's my crowd...the not all crowd. I have yet to be able to print from CS6 any more. This is a show stopper and my patience is wearing thin. And I'm tired of stupid questions like "is your printer powered on?" give me a break. This appears to be an adobe photoshop cs6 problem - as I can print from every other application. Anyone have any ideas? Adobe should have something?... Adobe system info below:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Mac OS 10.10.3
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2300 MHz
Built-in memory: 8192 MB
Free memory: 4665 MB
Memory available to Photoshop: 7059 MB
Memory used by Photoshop: 70 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
OpenCL Version:
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
Display: 2
Display Depth:= 32
Display Bounds:= top: 1072, left: 140, bottom: 1950, right: 1580
Video Renderer ID: 16918311
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
OpenCL Version: 1.2 (Feb 27 2015 01:29:10)
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
Display: 1
Main Display
Display Depth:= 32
Display Bounds:= top: 0, left: 0, bottom: 1050, right: 1680
Video Renderer ID: 16918311
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 92629107631240972642
Application folder: KerrysHD:Applications:Adobe Photoshop CS6:
Photoshop scratch has async I/O enabled
Scratch volume(s):
KerrysHD, 232.6G, 19.7G free
Required Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
Primary Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Plug-ins:
Additional Plug-ins folder: not set
Installed components:
adbeape.framework adbeape 3.3.8.19346 66.1025012
AdbeScriptUIFlex.framework AdbeScriptUIFlex 6.2.29.18602 66.490082
adobe_caps.framework adobe_caps 6.0.29.0 1.276181
AdobeACE.framework AdobeACE 2.19.18.19243 66.492997
AdobeAGM.framework AdobeAGM 4.26.17.19243 66.492997
AdobeAXE8SharedExpat.framework AdobeAXE8SharedExpat 3.7.101.18636 66.26830
AdobeAXEDOMCore.framework AdobeAXEDOMCore 3.7.101.18636 66.26830
AdobeBIB.framework AdobeBIB 1.2.02.19243 66.492997
AdobeBIBUtils.framework AdobeBIBUtils 1.1.01 66.492997
AdobeCoolType.framework AdobeCoolType 5.10.31.19243 66.492997
AdobeCrashReporter.framework.framework AdobeCrashReporter 6.0.20120201
AdobeExtendScript.framework AdobeExtendScript 4.2.12.18602 66.490082
AdobeJP2K.framework AdobeJP2K 2.0.0.18562 66.236923
AdobeLinguistic.framework 17206
AdobeMPS.framework AdobeMPS 5.8.0.19463 66.495174
AdobeOwl.framework AdobeOwl 4.0.93 66.496052
AdobePDFL.framework AdobePDFL 10.0.1.18562 66.419471
AdobePDFSettings.framework AdobePDFSettings 1.4
AdobePIP.framework AdobePIP 6.0.0.1654
AdobeScCore.framework AdobeScCore 4.2.12.18602 66.490082
AdobeUpdater.framework AdobeUpdater 6.0.0.1452 "52.338651"
AdobeXMP.framework AdobeXMPCore 66.145661 66.145661
AdobeXMPFiles.framework AdobeXMPFiles 66.145661 66.145661
AdobeXMPScript.framework AdobeXMPScript 66.145661 66.145661
ahclient.framework ahclient 1.7.0.56
aif_core.framework AdobeAIF 3.0.00 62.490293
aif_ocl.framework AdobeAIF 3.0.00 62.490293
aif_ogl.framework AdobeAIF 3.0.00 62.490293
AlignmentLib.framework xcode 1.0.0.1
amtlib.framework amtlib 6.0.0.75
boost_date_time.framework boost_date_time 6.0.0.0
boost_signals.framework boost_signals 6.0.0.0
boost_system.framework boost_system 6.0.0.0
boost_threads.framework boost_threads 6.0.0.0
Cg.framework NVIDIA Cg
CIT.framework CIT 2.0.5.19287 145486
data_flow.framework AdobeAIF 3.0.00 62.490293
dvaaudiodevice.framework dvaaudiodevice 6.0.0.0
dvacore.framework dvacore 6.0.0.0
dvamarshal.framework dvamarshal 6.0.0.0
dvamediatypes.framework dvamediatypes 6.0.0.0
dvaplayer.framework dvaplayer 6.0.0.0
dvatransport.framework dvatransport 6.0.0.0
dvaunittesting.framework dvaunittesting 6.0.0.0
dynamiclink.framework dynamiclink 6.0.0.0
FileInfo.framework FileInfo 66.145433 66.145433
filter_graph.framework AdobeAIF 3.0.00 62.490293
hydra_filters.framework AdobeAIF 3.0.00 62.490293
ICUConverter.framework ICUConverter 3.61 "gtlib_3.0" "." "16615"
ICUData.framework ICUData 3.61 "gtlib_3.0" "." "16615"
image_compiler.framework AdobeAIF 3.0.00 62.490293
image_flow.framework AdobeAIF 3.0.00 62.490293
image_runtime.framework AdobeAIF 3.0.00 62.490293
LogSession.framework LogSession 2.1.2.1652
mediacoreif.framework mediacoreif 6.0.0.0
PlugPlug.framework PlugPlug 3.0.0.383
UpdaterNotifications.framework UpdaterNotifications 6.0.0.24 "6.0.0.24"
wrservices.framework
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE -
At my work we uses Macs to prepare PDF’s and the create folders to archive and print them. Other areas of work use PC’s to review these PDF. When they go to review these folders there is a small black dot which appears under random characters in the folder name and when they try and open the file an error message saying “There was an error opening this document, the filename, directory name, or volume label syntax is correct”. On the PC they can delete the name and rename the folder and the error disappears. If anyone can shed some light on this it would be greatly appreciated. If I was to have a guess I think its most likely an error with character recognition between the MAC and PC. Any help would be great , thank you
See if this helps on the charachters...
http://averstak.tripod.com/fatdox/names.htm -
I'm trying to update to the current operating system but when I sync my iPad and try to back it up an error message appears and says all data will be lost and it is unable to back up??
Hello,
Try completely reseting the device back to the factory defult, then try to restore it again.
I hope that works.
~Lt. Leviathan -
everytime i try to restore my ipod the first step is fine but then it just stops and says error. Is there any way i can stop this?
Hello,
Try completely reseting the device back to the factory defult, then try to restore it again.
I hope that works.
~Lt. Leviathan -
how can I upgrade without losing all contents?
The first thing you need to do is (in the left side of iTunes, under devices) right click on your phone, and do a manual back up. As long as that works, this should work for you. After you back it up, go to your phone in iTunes, and do a "Restore". Click the option to restore and update. When it is done with the update, it will ask you if you want to set your phone up as a new phone, or restore from the last back up. Restore it, and after another restart, and a sync, you will have your updated phone without loosing your information.
-
When I open up a PDF Document all i get is an error message saying: "There was an error opening this document. The network path was not found" I dont know how to fix this, so looking for some advice please, as I really need o open up my documents.
Thank for any help.The documents I’m trying to read are already saved on my computer, under various different headings, I know that we have a server, so I only assume these documents are saved on here, as I said before I’m not good with all this techno stuff. I do my work each week ( on a payroll system) and save the documents for each company, they automatically go to the correct place. I never request for them to be saved in a certain place ( well not that I’m aware of) . I then on occasions need to open up this information, it is then that I can’t read or open the documents. We do have a tech help, but they are off sick until the 5th Jan, hence me trying to work out if I can fix this problem through this help site. Its ADOBE Reader that I’m trying to use.
-
Hi - in the app store, I've logged in with no problem, but when I go into my existing purchases and have INSTALL next to everything I've bought, and try to click on them it says;
"There was an error in the App Store. Please try again later. (100)".
I've tried restarting, clearing all caches, buying and downloading new apps (which works), and also buying and downloading more music from iTunes too (so I update all T&C's etc too, and update all payment info). But nothing seems to solve this. Any ideas?? Thanks a lot, GregThis procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
ls -@Oaen L*/Coo* | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there. -
we are receiving an error when opening certain pdfs saying "there was an error opening this document. the file is damaged and could not be repaired"
i've tried a few things to fix this issue with no luck
tried on a brand new windows 7 install without any added software like anti-virus software, etc
tried on my home pc (I forwarded the document from my work pc to my home pc and still receiving the same error)
don't think it's anything related to the computers, thinking it's more an issue with the pdf. i've tried the basics like deleting temp files from IE, going to %temp% and deleting that out, doing an acrobat repair, trying in reader instead of acrobat, updating users from acrobat 10 to 11, and still receiving the same issue. the odd thing is, some people can open this document and some receive the error. the other thing is i've tried alternative pdf programs with no avail, same errors from those as well
i work on the helpdesk with one other person for the company and not sure what else we can try
don't think this is a pc issue - tried on pcs in the company, home pcs, personal pcs and all get this error
got to be an issue with either the pdf, or the way its being sent
i did reach out to OUR e-mail team here (lotus notes admin) and they've ruled out anything as far as an encryption causing the conflict may go, so notes isn't the issue either
would it be possible it's on the persons end that's sending the file?Unfortunately, CR 10.5 is not supported on WIN 2012 Server. See this wiki for more details. In order to work in a supported environment you will have to upgrade to CR 2008 Service pack 7, or SAP Crystal Reports, developer version for Microsoft Visual Studio (2010 / 2012 / 2013).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
Getting "There was an error opening this document. Access Denied." message
Since reinstalling Windows 7, I have been unable to open any PDF files which I have had no problem with in the past. I keep getting a message saying "There was an error opening this document. Access denied." Any idea how to fix the problem?
Are these local or online PDF files?
If local, do these files have the proper permissions? Can you open other document types in the same folder(s)? -
When I try to open my Aperture Library, I get this message: "There was an error opening the database for the library “/Users/alyssabouma/Pictures/Aperture Library.aplibrary”.
I have already uninstalled and reinstalled the library....Help!!lyssalou,
what is your Aperture version and what is your MacOS X version?
What happened, before this problem occurred? Did you import images, install software, move the Aperture library?
I have already uninstalled and reinstalled the library....Help!!
What do you mean by reinstalling the library? Did you reinstall Aperture?
You might start the trouble shooting with using the Aperture Library First Aid Tools - repairing the permissions, repairing the library, and rebuilding, if necessary, see:
Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
Before rebuilding the library, make a backup of the Aperture Library, if you do not have one.
Regards
Léonie -
When I try to open aperture (which has worked great for months), I get this response:
There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
Please help!! Thank you!! =)Sonny3300, your signature says "Aperture 2" - is that correct? Then you need this trouble shooting guide:
Aperture 2: Troubleshooting Basics: http://support.apple.com/kb/HT2945
What is your Operating system version and where is your library located? Have imported new images recently or changed the location of your library?
Regards
Léonie -
I was using Aperture (3.4.1), when he appeared a notice that asked me to stop the Mac with the power button. When I restart Aperture no longer opens and the following message appears: There was an error opening the database for the library "/ Users / Andrea / Pictures / Aperture 3 Library.aplibrary."
How can I solve this problem?
ThanksAfter a system crash your Aperture Library may be corrupted, because Aperture may not have been able to finish the ongoing database transactions.
Have you tried the Aperture Library First Aid Tools?
Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
Try "Repair Database", and if this does not help: "Rebuild Database"
Regards
Léonie
Maybe you are looking for
-
iWork doesn't seem to recognize that I already have the pages, keynote, and numbers apps so I can't use iCloud to sync my documents. How to get my apps recognized?
-
Is there anyway to use the ipad2 as a bluetooth headset?
Well that is my initial question. i have well searched the internet for the answer but haven't found anything really relevant to my search. i have a few tablets in my house for my kids, visitors, and for my wife and me. This question arose when i con
-
Where is presenter in Acrobat 9 Pro Extended
I recently bought Adobe Acrobat 9 Pro Extended. I really like it. I understand that Adobe Presenter comes with it. When I pull up PowerPoint I can see the title tab for Adobe PDF, but I don't see anything for Presenter. Where can I find Presenter? I
-
Need help in order to recovery my Satellite L450-16Q
My laptop had a virus so I used the Product Recovery disk that came with it, thinking that it would fix it but it ended up erasing the whole of my computer even windows 7. So now I have a computer I can't use I have bought windows 7 directly from mic
-
4402 WLC Dynamic Interfaces- More than 1 Gateway Possible?
I am configuring a guest access solution with multiple guest access gateways associated with a single VLAN. Each gateway will have its own /24 network, and obviously it own gateway. The interface configuration page requires a single gateway in the IP