TS2634 i keep getting an error when trying to connect my phone to my imac g5 saying it cannot be used because it requires 10.6.3 when ive downloaded this it says my mad does not support this. all i want to do is sync my iphone4 with my imac

can anyone help when i try to connect my iphone4 to sync with imac g5 i get a message stating my iphone cannot be used as it requires itunes version 10.6.3 or later when ive tried to download this on my imac it says it does not support it.
All i want to do is sync my iphone 4 with my imac g5 can anyone help

Click here and download the software. Unless otherwise noted, a device running iOS 6 requires at least Mac OS X 10.5.8 and iTunes 10.6.3 to be synced from a Mac.
(78390)

Similar Messages

  • I have an Airport Extreme as my wifi hub and an Airport Express to beam music. All of a sudden the Express stopped working and I get the error message "this version of Airport Utility does not support this base station".  All my software is up to date and

    I have a WiFi system in the house that uses the Airport Extreme for a hub and an older Express for sending music from my Mac to my sound system. Everything worked great till yesterday. When I go to Networks I see the Extreme and I see the Express but the Express is no longer connected and I get an error message "this version of AirPort Utility doesn't support this base station".  Any ideas?

    This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
    To check and see if  that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
    Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
    You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

  • I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time

    I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time. Is this an antenna problem? Or something else ?

    Your iphone is right, it is not supported. The iphone's bluetooth protocols do not include file transfer, but are intendes only for headsets, stereo headphones, cars, and keyboards.

  • HT1338 I am trying to download adobe flash player on to my ipad2 i keep getting this massege that safari does not support this ?

    Hi
    anyone there
    I want to down load adobe flash player to my I pad but  a massage show up saying Safari does not support this ?
    Anyone there?

    No Flash for iPads, iPhones, or iPods
    Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
    Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
    So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
    Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
    Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash.
    Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
    Apps that can display some Flash from the Web:
    Puffin
    SkyFire
    Photon Flash
    Browse2Go
    iSwifter
    Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that."

  • TS2634 I am trying to connect my camera through a USB and it says it does not support this device

    I just bought the USB connector for mynipadbandntried to connect my camera but it comes up does not support this device. What do I need to do in order to connect my camera ?

    What model camera?
    Cheers, Tom

  • How do I tell what version airport express I have?  Airport Utility says this version does not support this base station.  What to do, how to update?

    I tried to add an older airport express to my network that I had not been using.  It shows up in Airport Utility but Airport Utility says that this version of Airport Utility Dies not support this base station.   I am running airport utility V6.3.4 on a mac mini running OS X 10.10.  Not sure which airport express it is, nor how to check.  I assume I need a firmware upgrade on the Airport Express, but not sure how to do this without Airport Utility.  I tried to download an older version of Airport Utility, but could not install because it does not support OS X 10.10   Any ideas other than throwing a perfectly good airport express away?

    Don't throw the AE away. It is still very useful as I have both the old & new each work well (sometimes the sound keeps dropping out but I think that has to do with the wirless settings!!!)
    You need Airport Utility 5.6.1 which works in 10.10 - I managed to download a .dmg from the net but not sure how I could get it to you.
    The new utility doesn't support  the old AEs unfortunately which I have and Apple have no intention of allowing a utility that will cover all
    AEs.
    Try and get a version 5.6.1.

  • The iPod software update server could not be contacted. the server does not support this version of itunes its saying

    i bought a new iPod nano 6th generation and when i am trying to sync it with iTunes its saying "the iPod software update server could not be contacted. the server does not support this version of itunes" cn any one help me how to set the thing right.
    Regards,
    Brahma.

    You need to update to the latest version of iTunes. Go to the apple and select software update.
    i

  • When I click safari on my iMac it says my toolbar does not support this. What is the issue?

    My safari won't open. When I click it, the message says the toolbar does not support this. How can I fix safari?

    You installed the Conduit spyware. To remove it, back up all data, then follow these instructions.
    If the instructions don't work, proceed as follows.
    Triple-click the line below on this page to select it:
    ~/Library/Application Support/Conduit
    Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
    Go ▹ Go to Folder…
    Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
    Repeat with this line:
    /Applications/Toolbars
    Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
    /Library
    Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
    Application Support/Conduit
    InputManagers/CTLoader
    LaunchAgents/com.conduit.loader.agent.plist
    ScriptingAdditions/ct_scripting.osax
    Close the Finder windows you opened. Log out and log back in.
    I've seen a report that Conduit may be bundled with a scam "utility" called "MacKeeper." If you installed MacKeeper, you should remove it according to the developer's instructions. It's worthless and causes many problems reported on this site.

  • Error when trying to re-mount a VHDx (the version does not support this version of the file format)

    Hi,
    I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
    it tells me this:
    No matter what I try, I can't mount it. Double clicking just says this:
    Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start.  The data contains the error code.
    How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
    Thanks for the help
    Cheers
    Maike

    Hi Maike,
    Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
    In the meantime, check if destination partition is NTFS formatted.
    Problem with Attach VHD function: The version does not support this version of the file format
    http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
    Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
    Hi Mandy,
    I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
    As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
    So I consider this dealt with ;)
    Thanks anyway!

  • "The iPod software update server could not be contacted. The Server does not support this version of iTunes." Any thoughts? Also, iPod will not turn or or charge (tried in my laptop, house computer and dock) I have all the lastest updates to my knowledge

    "iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?

    only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

  • I'm trying to purchase printable ITunes cards -- which I've done in the past...no problem. Now a message reads: this Apple ID does not support this purchase....or something to that effect. What do I do?

    I'm trying to purchase printable ITunes cards -- which I've done in the past...no problem. Now a message reads: this Apple ID does not support this purchase....or something to that effect. What do I do?

    First of all, I think you are confused by something.
    You don't print cards. You print Certificates. So which item are we dealing with here first of all?
    Also, you can't buy gifts with just Store Credit, so do you have a linked CC?

  • Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

    Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

    Try a reset:
    - Hold the home button and sleep/wake button down at the same time. When the Apple logo appears release both buttons then try and charge again.
    If issue persists try:
    - Another known working cable
    - Check the charging port for any damage or debris
    - You could also use a dry soft bristle toothbrush and gently brush it on the port to clean it of any debris that could be in there

  • "...does not support this type of alias."

    I just reinstalled the OS 10.4 onto my G5 using the erase and install function. The drive is formatted as a Mac OS Extended (Journaled), which is an HFS+ format. I'm trying to copy some files onto the main hard drive from a DVD. I keep getting an error message that says "[the file name] cannot be copied to the destination, perhaps because the destination does not support this type of alias." I researched the message and the only thing I could find was that the error appears if the destination disk is formatted as a UFS disk. I thought maybe I made a mistake when I reinstalled the OS, so I tried to copy the same files to the secondary internal drive and to an external Firewire drive, and I got the same message both times.
    What should I be looking for so that this will work? I'm going to post in a couple other topics, but any help would be greatly appreciated.
    Thank you in advance,
    Lloyd

    Barry,
    I was trying to make back-up copies of my Adobe CS2 disks by copying the disks to the hard drive then burning them to CDs, but I got the error message when I dragged the contents from the original CD to the HD.
    This worked, but it took a while: I Stuffed each CD to the HD, then unStuffed them and used Toast to burn a new CD. A few steps longer, but at least it worked.
    Now, if I could only figure out why the second internal drive does not have the "Ignore Permissions" check box available, I'd be all set.
    Thanks,
    Lloyd

  • The platform does not support this application, but does under other account

    Okay the MSI Gaming App works just fine under my own account on my PC on which I am the administrator. So it isn't a driver related issue.
    Last week I created a second account for my son as he also like to play some games but I dont want him messing up my account.
    I wanted to start the MSI Gaming App on his account as my son was going to play a more graphic demanding game but the MSI Gaming App is only giving me the warning: the platform does not support this application.
    I checked the Security and Permissions for Authentication they all set like they should which works fine for other software and applications.
    Even when I try to run the app as administrator it keeps coming back with this warning.
    Anyone got clue why? Maybe I'm overlooking something obvious but till now I still didn't get the MSI Gaming App to run like it should. Some help please.

    Quote from: JLio01 on 11-December-14, 14:49:39
    1. What's your App version?
    2. What's the mobo/vga/specs of your son's pc?
    First of all thanks for the replies and future replies.
    1.
    Version 1.0.0.18
    2.
    My sons has his own profile/account on my pc so the hardware config and installed drivers are exact the same. And on my profile the App is working fine. So it has nothing to do with mobo/drivers/vga/specs. I already had installed the App before I created his own profile. As administrator I added all the needed permissions to the MSIGamingApp Properties Security Tab. Like I did with all other software he is running on his profile and which are working just fine. For example Teamspeak, Mumble, Several games, MSOffice and so on. I even set the Permissions to Full Control like on my Administrator profile. At the Permission Entry for MSIGamingApp I let the permissions be inherited from the parent object my administrator profile.
    If I would re-install and if during the installation windows would ask for whom the software should be accessible. I only would let Windows do exact the same as I did as administrator in the App Properties Security Tab. That the nice thing about being an admin. Create profile, set permissions and let users on your pc or network access software and applications already installed on the network. So that is why I find it weird this doesnt work.
    Also running the MSIGamingApp as Administrator on his profile gives the exact same warning.
    I do know how to add permissions to the security tab have been doing that several years for some job I had once.
    I could use Afterburner maybe but I don't trust him yet with making changes in Afterburner.
    The MSIGamingApp gives just enough controls OC-Gaming-Silent mode.
    And in case of trying a re-install of the App anyone got an url for a new version?
    Might have found it but it isn't on any MSI webpage.
    I did found something on Guru3D but I'm not aloud to post external links.
    Did found a url linking to a Torrent side but my Bullguard AV blocked this site instantly.
    So a clean url would be nice so to say.
    So weird I cant find this software on http://nl.msi.com/search/MSIGamingApp/product/1 or any other MSI site

  • I keep getting an error while trying to reinstall itunes?

    I am trying to reinstall itunes and i am having an issue. I keep getting an error while trying to install and I keep getting very far but I always seem to end up with this.
    "Could not open key
    UNKNOWN\Components\DA42BC89BF25F5BD0AF…
    \b25099274a207264182f8181add555d0.
    Verify that you have sufficient access to that key, or contact your support personnel"
    I was attempting to reinstall due to an error message appearing when I opened itunes
    "Itunes requires a newer version of Apple Mobile Device Support Please uninstall
    both Apple Mobile Device Support and iTunes, then install iTunes again."
    I have tried a few solutions and for the first error when installing one was an attempt at editing a registry file which I do not think succeeded because I am running windows 8 and was being directed for windows 7.

    "Could not open key
    UNKNOWN\Components\DA42BC89BF25F5BD0AF…
    \b25099274a207264182f8181add555d0.
    Doublechecking. Have you tried the following user tip?
    "Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

Maybe you are looking for