TS2634 Iphone will not charge. the battery does not even show up. Have tried holding down both on/off and enter button at same time

the battery does not even show up. Have tried holding down both on/off and enter button at same time
Doesn't appear to have any life. Not that old

I have tried several plus into the computer itself

Similar Messages

  • HT5687 IPhone5s :After charging the battery does not last days (sn:F17LW55HFFG9)

    After charging the battery does not last days

    This happens with the closure of all applications
    Is this normal without the use of any application or contact
    I've used iphone 3 and iPhone4 the battery lasts more than that 

  • My iphone screen has gone completely blank I have tried holding down both the sleep and home buttons and nothing has happened and I have tried to connect it to my laptop but itunes will not recognise, what can I do ?

    My iphone screen has gone completely blank I have tried holding down both the sleep and home buttons and nothing has happened and I have tried to connect it to my laptop but itunes will not recognise, what can I do ?

    have you tried charging the device ?
    if so and it still does not work you can try a Forced Recovery..
    by holding the HOME button down and plugging it into your computer at the same time..
    http://support.apple.com/kb/HT1808

  • When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes.  I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge.  Help?

    When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes.  I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge.  Help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • TS3048 I have just purchased a new apple cordless keyboard.  The numeric line of keys along the top are not functioning as they should.  For example I am unable to get a question mark or a forward slash.  I have tried holding down both shift and alt keys.

    I have just purchased a new apple cordless keyboard.  The numeric line of keys along the top are not functioning as they should.  For example I am unable to get a question mark or a forward slash.  I have tried holding down both shift and alt keys.

    Thanks for prompt response - I tried what you suggested but I'm afraid it has not helped.  It seems as though the line of number keys along the top aren't actually doing what is printed on them.  Some are OK, but the further towards the right hand side of the keyboard you go, the less predicatable it becomes.  So whilst the second key from the left gives me 1 and ! when holding the shift key, by the time I get to the 6 when I press and hold shift I get ^ rather than & symbol which is what is actually printed on the key.  The & symbol is actually on the next key along - and when I hit the key with 8 I get * rather than the ( which is printed on they key but actually located on the next key along.  Things get even more muddled by the time I am over on the right hand side as rather than a question mark (I have had to type the word as I cannot find the symbol anywhere!) I get this _ and the other symbol marked on the key is a comma, but I get - instead.  It is going to drive me mad if every time I want to type something it is a guessing game....!  What do you suggest - question mark

  • Since updating my Iphone 4S to ios6 the battery does not hold. Anyone else have this problem?

    Since updating my iphone 4S to the iOS 6 system my battery runs down quickly. I would like to know if this is happening to others or if there is a setting I should check.

    http://discussions.apple.com/thread/4310494?tstart=30 go thru the suggestions given.

  • Is there a settings in Win7/HP feature that the battery does not charge until it is under 95%

    I just purchased a HP Pavilion dv6-7043cl laptop and have noticed that the battery does not charge unless it is below 95%.  I am very concercerned because I had a different laptop from a different manufacturer where I had battery issues.  That manufacturer was not helpful and I will never buy from them again.
    I have heard good things about HP which is why I decided to buy this particular machine.  However,  I have only had this machine for 3 days and now this is starting.  I cannot find a Win 7 (I am running Win 7 home premuim 64 bit) setting that controls when the battery starts to charge.  Is this a function of the HP Power Manager?  Is this a feature of the battery HP ships with their laptops?  Or is this indicating a problem with this machine?   I am a college student and I need a reliable laptop for school. 
    Any information you can provide is greatly appreciated.
    Thanks,
    HanNan
    This question was solved.
    View Solution.

    Hi,
    This feature is intended by design in order to reduce unecessary charge/recharge cycles - reference to this can be found in the 5th paragragh in the document below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00287805&cc=us&dlc=en&lc=en
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My ipad will not power on after update. I have tried connecting to computer which doesn't recognize it. I have pushed top and circle buttons at same time. It had a battery charge before it died.  I tried to stop the upload and am afraid it 'crashed'

    My first genteration ipad will not power on after update. I have tried connecting to the authorized computer which won't recognize it - does not acknowledge a device is plugged in. I have pushed top and circle buttons at same time. It had a battery charge before it died.  I tried to stop the upload midway and am afraid it 'crashed'

    Try putting it into recovery mode.
    Connect iPad to your computer via USB while it's turned on.
    Open iTunes
    Hold the iPad's Sleep/Wake switch (power button on the top of the iPad) down until the "power off" slider appears.
    Power off the iPad completely (wait for the progress spinner to disappear).
    Hold the Sleep/Wake switch AND the Home button down for a full 10 seconds.
    After 10 seconds (the second time you'll see the Apple logo on the screen) release the Sleep/Wake switch while still holding the Home button.
    Continue to hold the Home button for another 10 seconds until the USB connection image appears on the iPad's screen, then release the Home button.
    A pop-up message will appear on iTunes saying it has detected an iPad in recovery mode, you must restore...
    Click on the "Restore" button and the process will begin.

  • My battery does not charge, the battery is okay but no charging functionality

    i have a g60 laptop, I think it is US120 model, It should be registered to me.  When the AC charger is on it does not detect it and the battery does not charge.  The battery got lower and lower and now it will not start.  It also will not run without the batter in it and without charge in the battery.  Any ideas_?

    It sounds like your adaptor may have died.  Here is a link that you can find information for troubleshooting your adaptor.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00363266&tmp_task=solveCategory&cc=us&dlc=en&la...
    If I have been helpful, a Kudo is always appreciated.

  • I updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks

    i updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks

    To show the battery percentage used go to settings
    from there click general scroll to usage and select
    scroll to bottom of page for battery usage select on.
    This will show the icon battery and the percent numbers on the top right.
    When phone is connected to an outlet sometimes it does not always show complete charge. I do not understand why but it is what it is.
    FYI I sent reply to you not to deggie. You can have your own satisfaction to reply direct.

  • HT3964 The battery does not appear to be charging properly.

    The battery does not appear to be charging properly.

    Go to SYSTEM PROFILER>HARDWARE>POWER>BATTERY INFORMATION.  Post this from your MBP:
    Ciao.

  • Power Adapter Does Not Charge the Battery and Charge Light Is On?

    Power Adapter Does Not Charge the Battery and Charge Light Is On?
    My power adapter doesn't charge my computer anymore. however the charge light is on.
    Please help my battery is draining fas

    So, with your power adaptor connected not only does the battery not charge but the powerbook is not running on ac power. Then I guess the power adaptor is faulty. In as much as you've verified this with a known good one a new one is in order. Try yours in another powerbook to make sure.

  • Satellite A100-166 PSAA9E does not charge the battery

    Hello,
    My laptop does not charge the battery.
    Although Windows Xp recognizes the battery and says charging, the battery is not recharged.
    I tried with a spare battery as i thought the battery was defective, with same results.
    Strange is, when i turn off the laptop the power supply led stays on and blue, even without the power supply atached thus discharging the battery.
    The battery led is always amber but not charging!!!
    What is the matter with the laptop?
    Thanks

    Hi
    Generally there are three different possibilities;
    1) the AC adaptor is faulty
    2) the battery is faulty
    3) the notebooks board electronic (power supply electronic) malfunctions
    So now its necessary to check all this steps to locate the fault.
    You said that you have tested different batteries and the AC adaptor works too.
    So its possible that there is something wrong with the power supply electronic
    In such case there is no much to do as to contact the ASP in your country. The technicians should check the notebook and should run some diagnostic tests
    I recommend contacting the guys and ask for the details and for the further handling Good luck and happy new year.

  • TS1367 My charger connects with my macbook with a very faint green light (not the normal orange light) and can maintain the computer turned on but does not charge the battery.

    My charger connects with my computer with a very faint green light (not the normal orange light) and can maintain the computer turned on but does not charge the battery. The power source to keep it on is the power adapter and that it's "Not charging" on the battery settings. And my charger seems to charge other computers fine.
    The part of my mac where the adapter (L-shaped, magnetic) attaches is a bit damaged - a small piece of the white case/body around the part where the adapter attaches is broken off, but that's just an outer damage.
    I don't know what's wrong with my computer, and if anyone has had a similar experience or knows what's going on, it'd be tremendously helpful!
    Thank you!!

    Hi Christopher,
    Doubtful an upgrade would fix a hardware issue. If you are thinking of upgarding to Lion, best to do all necessary maintenance first.
    Try Resetting the System Management Controller (SMC)
    If that doesn't help try here >  Apple Portables: Troubleshooting MagSafe adapters

  • TS2771 My daughters iPod touch does not turn on even after hooked up to charger for over 24 hours. Tried to hold the power button and home button at same time for 10 seconds and still did not turn on.

    My daughters iPod touch does not turn on even after hooked up to charger for over 24 hours. Tried to hold the power button and home button at same time for 10 seconds and still did not turn on.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

Maybe you are looking for

  • I bought a new Photosmart 5520 printer for my Mac Powerbook running OS 10.6.8, and it stopped workin

    I bought a new Photosmart 5520 for my MacBookPro running OS 10.6.8. It stopped working after a few days. documents hang up in print queue, which says "printing page 1, 33% complete..." and below that it says "idle". I tried the various restart scheme

  • Hyphenation sometimes not working in FM9

    Hello, FM9p196, XP SP3 Sometimes words are hyphenated but no hyphen appears. Anyone noticed this? Best regards, Mats

  • KER1-Changes not update in KE30

    Hi folks, i have sa problem with KER1. I have done a change on existing key figure scheme. I have added in a element formula 5010  a new element 9002. Now the formula is 9001+9002. I have saved, now i want to now why in KE30 i don't see any changes,

  • Requirement Class Selection

    Hi We have a two company code say 1000 / 2000. in 1000 co code we produce FG by strategy 10(MTS) where as in co code 2000 we produce material FG by strategy 45 (MTO). now my qestn is : when i create Sales order for material which is in co code 1000 s

  • 'External process-0130' Inspection in QM?

    Hi Team, Requesting your valuable help for below scenario. Step 1: Receiving the material(M1) in GR stage from 'vendor1' - 01 inspection active with one operation(op10-Visual inspection) in Inspection plan .If material ok it should be sent to Externa