TS2662 wireless mouse indicator light flashing

have a new imac with wireless mouse.
sometimes the mouse does not connect.
the indicator light flashes when it does
not work. intermitten connection.
battery 100% & mouse connected

Try making the mouse a favorite.
Barry

Similar Messages

  • G5 Froze & No Longer Able To Start Up - Indicator Light Flashes 3 Times

    I was using Logic while my PowerMac G5 DP 1.8 froze completely. I wasn't able to escape the program or do anything else for that matter so I manually powered down and then when I turned my G5 on again the computer would not start up while the indicator light on the front panel flashed 3 times and then paused and then repeated again indefinitely. Over time the fan starts softly and then gets very loud.
    I have been reading alot of reports, here and elsewhere, that this has been happening to alot of G5's after about 3 years time (which is approximately the same age as my computer). I also tried a bunch of stuff like the PMU reset, pulling out some of the memory and trying to restart the computer but nothing has worked.
    From my web research of other people's experiences, it appears that the logic board or the CPU or both need to be replaced. I have an appointment to take the G5 to my local Apple store but I was wondering what to expect. The G5 is obviously no longer under warranty but are they going to expect me to pay for a new board or CPU? I also read somewhere that in one case the Apple store just fixed the computer with no charge for parts or labor.
    Has anybody had this experience recently and know what to expect? I'm really disappointed and frustrated and this couldn't have happened at a worse time for me! Any advice or insight would def be appreciated...

    Thanks for your response DP...
    I went to my Apple store appointment last night and was informed that 3 blinking lights means either that there is a problem with RAM or that the Logic Board needs to be replaced. They tried to start the machine with their RAM with no success which leaves only the Logic Board as the culprit.
    Once again I am extremely disappointed that my computer which is only 4 years old needs a major repair! And I was quoted ~ $800 from the Apple Store to get it fixed!!!
    FAO DP: Which UPS do you recommend? And do you think that a UPS would have saved my Logic Board? Is there a connection between the use of a UPS and the longevity of the Logic Board in your experience? What hurts the Logic Board - spikes or surges or is it drop-off's too? And just to check, regarding the symptoms I described above, does it seem like my power supply is still working ok?

  • HT1515 I've lost my wireless connection with light flashing amber, I've unplugged router and modem and pressed reset button on airport extreme

    Any suggestions on retreiving wireless connection with airport extreme, have unlugged power to all sources and pressed reset button on router, still amber flashing light

    Hello ebulloc,
    It sounds like you are getting the flashing amber colored light and cannot connect to the internet with it. According to this article:
    AirPort base stations: About AirPort base station status lights (LED)
    http://support.apple.com/kb/ht4600
    Flashing amber
    Startup is complete, but the Wi-Fi base station has detected a condition that requires your assistance. To resolve flashing amber status light conditions click here to learn more. Launch AirPort Utility to find out what conditions are being reported.
    This article should lead you to a resolution:
    Wi-Fi base station: Understanding and resolving a blinking amber status light
    http://support.apple.com/kb/TS1589
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Indicator light flashes repeatedly

    box was initially set up then all of a sudden no connection only an APPLE ICON appears on the tv screen

    hello people, I can not install my apple tv, I live in Brazil, but I bought the apple tv in california ok, when I turn on the hdmi cable and power cable, nothing happens, does not appear anything, I tried to do an updating on my computer , and the lights on the front of the device does not stop blinking, what should I do I'm getting very disappointed with the apple tv, can someone help me, thank you forever  
    Desfazer edições

  • HT3964 My MacBook Pro i5 Dual Core has a hardtime waking up when the computer is put to sleep and only when it goes to sleep and has been asleep for a while. The indicator light flashes on and off for a while and then freezes. I've done an SMC reset once.

    Does any one have the same problem with their MacBook Pro i5 Intel Dual Core?  If the computer goes to sleep (not the screen) and is asleep for a while, when I try to wake it up it doesn't respond. I have to power it downn and restart it and sometimes it takes two or three attempts. Otherwise it works fine. I upgraded the memory to 8 GB. That is the only alteration doen to it. I've performed one SMC restart and now it wakes up  but it takes a while and a gray screen shows up. When I insert a DVD it won't start automatically I have to start the application in order to see it. Any suggestions?

    http://www.apple.com/support/macbookpro-videoissues/

  • Wireless GPS Module LD-3W Indicator Lights

    Hi, I've just received a LD-3W GPS module. I've read the user guide and can't find a full description of the indicator lights. Currently the 'Battery charge indicator light' flashes green when the unit is turned on. No other lights show up. Does this mean that it's not picking up GPS signal, nor connecting via bluetooth? If so, what might the problem be? Cheers, Gar.

    Hi
    I have a similar problem. Sometimes when I turn on the LD-3W it gets sattelite connection right away, but other times nothing happens, it is very frustrating. I have tries with two different LD-3W GPS receivers and two N73 and a E65. The problem is the same for all combinations, thus Im quite sure that its not due to a faulty device or phone.
    Sometimes I can make the GPS device get its sattelite connection by resetting it to factory defaults, but it does not always works.
    The phones I have been using the GPS device with are normally also connected (or have been earlier in the day) to a computer. I have read somewhere that there are some problems with sterio bluetooth connections, but even if I start bu turning off both the phone and GPS device, the problem persists.
    I would expect that more ppl have experienced this problem, have any1 found a reason / solution??
    Mikkel

  • Mbp late 2011 battery indicator light question

    The mbp will not boot or turn on.
    Without being connected to a power source, none of the battery indicator lights come on when I push the little battery indicator light button.
    Once I plug in the power cord and push the little battery indicator light button, the very left battery indicator light flashes on and off green.
    What does this mean?
    I have detached the battery and re-attached the battery adapter to no avail. (Using the following instructions: http://www.spathi.net/tech-support/macbook-pro-wont-turn-on-charge-light-blinkin g-orange/)

    If you have AppleCare, they will mail you the battery.
    If you do not have AppleCare, call Customer Relations 1-800-767-2775. See what they can do for you. CS will determine if your model MBP qualifies for a free battery.
    An Apple Store is not the only place to go. There may be an AASP closer. See KB Article: http://docs.info.apple.com/article.html?artnum=304398 How to find your nearest Apple Authorized Service Provider (AASP)
    Another thing you can do is to go to System Profiler. Copy/Paste the Power info here. *Do not post any serial numbers.*

  • Dumb question: Firmware update vs. "power indicator light"

    Software Update says I need the EFI Firmware Update 1.3.
    OK.
    But the related doc (Article 303364) says about restarting: "Hold down the power button until the the power indicator light flashes, then release it."
    Power indicator light? I must have missed that.
    So... how long should I hold down the power button? Until I hear the "long tone" that's mentioned? Or what?

    Chill out amigo. That is not what the instructions say in the Apple document referred to by the EFI update download page.
    iMac EFI Firmware Update 1.3, which refers one to Apple article 303364 About firmware updates for Intel-based Macs, where step 6 states
    Hold down the power button until the power indicator light flashes, then release it. A long tone will be heard, then a gray screen with an Apple logo appears. There is a progress bar under the logo. As the progress bar moves, your firmware is being updated.
    There may be an error in the way the information was written, but neither the OP nor I, with my ESL, misread the document. I have read a few of your posts lately. They have a snippy know-it-all tone. The Apple Discussions are user to user help. There are no stupid questions here. Calm down and be nice to folks, please.

  • Apple tv light flashes constantly. no service

    My apple TV indicator light flashes but provides no service. I have tried to reset by holding the menu and down arrow but no success, Any suggestions?

    Apple TV (2nd and 3rd generation): Restoring your Apple ...

  • TS3048 my wireless mouse is not working at all. I have changed the batteries and still nothing, not even a flashing green light. I am using someone else's computer to ask these questions as I now can't use mine. Help!!!

    my wireless mouse is not working at all. I have changed the batteries and still nothing, not even a flashing green light. I am using someone else's computer to ask these questions as I now can't use mine. Help!!!

    I just had the same problem. And I found the solution, on Youtube.
    The problem is that these ******** at apple designed the battery compartement, the distance between metal contacts too big.
    That means the batteries plus or minus poles are not touching the corresponding contacts in the mouses battery compartement.
    Most likely the battery doesn't get pushed up to touch the plus contacts.
    I used a fingernail to push the battery up and tadaa, the green LED came on.
    The guy in the Youtube video just put some folded aluminium foil under the minus poles for bridging the gap.
    See here, "How to fix the Apple Magic Mouse!": 
    https://www.youtube.com/watch?v=7vlDEVfV45s
    Hope this helps.
    <Edited by Host>

  • TS3048 My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.

    My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.What can I do?

    Hello:
    Try resetting the SMC and PRAM.
    Barry

  • TS3048 I'm having a difficult time getting my wireless keyboard & trackpad to work w/my iMac. I just changed the batteries on both devises but for some reason, after turning on and seeing the green light flash on both devises, won't connect to iMac. Pleas

    I'm having a difficult time getting my wireless keyboard &amp; trackpad to work w/my iMac. I just changed the batteries on both devises but for some reason, after turning on and seeing the green light flash on both devises, both won't connect to iMac. Please help...

    Hello:
    Try resetting the SMC:
    http://support.apple.com/kb/HT3964
    Barry

  • I have macair bought 2009. Bluetooth connect with mouse and keypad not working. It used to work. Batteries are good. Green light flashes on each device, but no connection. Any suggestions to help me here? Thanks.

    Dear Community,
    I have a macbook air bought new in 2009. Since 2011 I only use it occasionally as I  now mainly use my iMac. The mouse and keyboard that came with the macbook air used to work fine with bluetooth connection to the macbookair, but now they don't. The batteries are good. The green light flashes showing it is seeking other bluetooth device to connect to. But they wont connect to my macbookair. What could the problem be? Your help would be much appreciated.

    Thanks for that. Yes I checked that already and BT enabled. Yes, external keyboard. But I just moved the computer to different part of room and bingo the devices paired and connected. So problem now solved. Thanks for offering your help.

  • T430s - Disk-activity and wireless indicator lights not working

    Just noticed that the indicator lights on the T430s are not working. There is a wireless and a disk activity light that are not lit up or blinks during activity. Located just left of the T430s sign on the lower half of the laptop cover.

    Hello:
    That is a new one on me! 
    Try trashing a couple of preference files and then restarting:
    com.apple.dock.plist
    com.apple.dock.db
    Barry

  • HT3904 Magic Mouse: new batteries, indicator light does not come on?

    I replaced the batteries in my Magic Mouse a week or so ago. The Magic Mouse stopped working today.  The batteries tested "'weak", but after I installed new batteries, the green indicator light does not come on.  What do I do next?

    Hello:
    I would try another set of batteries.
    If that does not help, reset the PRAM and SMC.
    Barry

Maybe you are looking for

  • "Access denied" when opening report on RAS Server

    I'm sure I'm doing something wrong, but I've only been able to open a report using the rassdk protocol from the server where my java code is running.    This is fine, but I was hoping for efficiency sake that I could have reports reside on the RAS se

  • Does my all-in-one support more ram

    My questions are: 1.Does it support more ram 2.what type of ram(laptop, Desktop, Other) 3.Is my ram ddr3 or ddr2 idk

  • Have been lost, all the properties files in the CM repository (FSDB mode)

    Hi, I encountered the following problem: lost all descriptions to folders and files in the CM repository, which is connected to the FSDB mode. This happened as follows. At desired time connection to the server where the repository was broken, after s

  • Interview

    Hi, I ' ve finished oca certification.but i dont know how to enter into this field? how to prepare for an interview? please tell me what questions are frequently asked?

  • Acrobat X  stopped working on Windows 8 platform-not part of CS6

    I am running Acrobat 10 on a Windows 8 operating system. Acrobat worked fine for the past few months with no issues. Today I saved a file from the internet then closed Acrobat and opened a few additional files with no issue. Then I tried to open anot