TS2709 Don't have any success starting Apple TV with my iMac.
Not sure if my sharing settings are appropriate to share with Apple TV from my iMac?
The following article(s) may help you.
Understanding Home Sharing
Setting Up Home Sharing On A Computer
Troubleshooting Home Sharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
Similar Messages
-
I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?
Hold the Option key down and restart. Select one of the drives that comes up and hit the Return key.
-
In Contacts, I don't have any duplicates, but in iMessage contacts on iMac in Mountain Lion, the contacts it provides for a new message are all doubles. Why and how can I fix?
I also notice that each contact says iCloud in it twice, but when I go to iCloud.com, there are no duplicates either. Help..mdd770,
Try Contacts>Preferences...>Accounts...remove {-}/re-add {+}your iCloud account.
If that is not successful, follow the steps listed in iCloud: Troubleshooting iCloud Contacts. -
I recently started my iCloud and did the backup feature to store contacts from my phone to my iCloud, and no all of a sudden I don't have any numbers saved. How do I retrieve those contacts from before???
Pleae read this article about using iclouds to store contacts.
http://support.apple.com/kb/PH2576
Good luck friend. -
How do I create an icloud id on my pc? I don't have any apple device.
Is it possible to use create an icloud id on android device or a windows pc? I don't have any apple device.
http://www.apple.com/ca/icloud/setup/pc.html
Try this link. You will need to have an icloud account and other Apple devices but this will help store pictures etc. not sure what you are trying to do but maybe this will help. -
Apple can't seem to help me with this verification of payment information message that I'm getting when I try to rent a movie. My payment information is correct, and they don't have any issues billing me for anything else. What can I do?
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I have a problem with My Apple ID, because I have forgotten my security question and I don't have any rescue email address. Would you help me please?
It's not possible to me calling apple support, because I'm not in usa now.Then find whatever number that you need for wherever you are - in this support article - and seek help here.
http://support.apple.com/kb/HT5699 -
I can't open my apple id. Says i have a problem with billing, but really i don't have any problem with my billing
If you see a message that's there's a billing problem, you need to contact Apple directly > Mac App Store - Apple Support
-
When I try to connect to MobileMe in system preferences, it keeps saying that my password or username is incorrect. The same problem occurs on idisk.mac.com and when I try to connect to the hard disk connected to my AirPort Extreme. I don't have any problem to access my Apple ID account or ICloud. My password and username are corrected (I have one principal e-mail and two alternatives e-mails in my Apple ID). I don't how to solve it. The biggest problem is that I can't connect to the hard disk on the AirPort Extreme USB entrance and share files and backup.
Place the iOS device in Recovery Mode and then connect to your computer and restore to factory settings/new iPod via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
i buy from someone iphone 4 but they got apple id find my i phone i don't have any with this person how can i un lock my phone
You can't. Get your money back.
-
Im tryin to get my email verified for iMessage and FaceTime, but i don't received any emails. All info are correct (correct apple id and password). Though, i don't have any sim on my phone.
You can take a look at this support document for troubleshooting iMessage and FaceTime activation. If you have difficulty activating FaceTime or iMessage - Apple Support
I believe with the iPhone, you need to have a SIM installed, since the activation sends an international SMS to servers in the UK. Check to see what that support document states. -
i got this iphone 4 off of someone for $60 and its linked to a apple account and i don't have any contact to him now do i go to apple to activate it?
Hello tom,
I understand you are having issues activating an iPhone 3G. The following article addresses the exact error message you included:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Resolution
- Restart the iPhone.
- Try another means of reaching the activation server and attempt to activate.
- Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
- Try connecting to iTunes if you're unable to activate using Wi-Fi.
- Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore.
Thanks,
Matt M. -
I don't have any cridit card how I can creat apple account ?
I don't have any cridit card how I can creat apple account ?
Follow the directions here:
http://support.apple.com/kb/ht2534 -
How can I restore my data from IBooks and other program from IPad 2 to Ipad air. When I was set up, I forget to select restore backup. Now I have backup from iPad 2. I don't have any Mac PC..
Restore from iCloud Backup (if you have backed up to iCloud)
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork -
I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck!
Maybe you are looking for
-
Edit in Photoshop "Grayed out"
I have Photoshop CS5 Extended and Lightroom 2.7. When selecting 5 images, right clicking on them and trying to edit them in Photoshop those features are grayed out. Actually all feature which should work with PS are grayed out, but Nik features work.
-
Hello Experts, Is there any option in the system to configure PF Loans.(My requirement is after the employee is eligible for PF loans which may be Marrige,Education etc),where to configure this all.Also there should be a PF reports with details of PF
-
Create folder In OS drive (Urgent)
Hi all, I want to create folder in local drive with sysdate by using sql or pl/sql . I used "create or replace directory chin as 'c:\' ;" Directory is creating but it is not showing 'chin' in C Drive . Can u please help on this . Thanks in advance .
-
I have WCS 5.X running with trial license until our we receive our purchased license. Our 2710 AL came in and I have it up and running and known to WCS. I have a couple getting started questions. Not sure what the https enable is for on the AL? I did
-
ROWTYPE and "Too many values" error...
I'm in the middle of trying to understand the inner workings of %ROWTYPE and how I can copy the structure of a table with it. I think I'm understanding the gist of it, but I continue to fail in pinpointing the actual values I try to insert with an ex