TS2771 my ipod says"ipod is disabled, connect to itunes". i am currently on itunes, but dont know what to do from here to get ipod to show all apps and information on the screen
my daughters ipod currently reads"ipod is disabled, connect to itunes". i am currently connected to itunes, but im clueless as to what i need to do to get the ipod back to the normal screen that displays the main screen to be able to use the ipod properly. i have tried resetting the ipod by turning the system off and back on already, can anyone help me?!!
thanks
blonde mom in tennessee
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Similar Messages
-
on my ipad it says ipad is disabled connect to itunes but i try and connect it to itunes and says i needvto wright the password in the ipad first but cant help please
I have the same problem with my ipod touch ... but im trying to find a way to fix it without restoring it...
but one fix is to shut it down completely ... then press and hold BOTH the power button and the home button .. hold both of those 4 ten seconds .. then release the power button but still hold down the home button .. and then it'll show something that says "connect to itunes" once u get it connected to itunes , click the restore button ... BEWARE THIS WILL WIPE OUT EVERYTHING ON YOUR IPOD!!! IT WILL RESTORE IT BACK TO FACTORY SETTINGS , AS IF U JUST BOUGHT IT !!!!! then it should work fine again .. but u will lose all data on there besides the things you have synced with itunes already..
Thats y im iffy with doing this , im trying to find a fix where i wont have 2 restore it but i dont think there is 1 :'(
good luck tho
~sam -
i have forgotten my passcode for my iphone and its now saying "iPhone is disabled connect to itunes" but i need to get in the phone to do anything on itunes !!! please help me i will be so greatful
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
I tried changing my password, and it changed to one that wasnt it, and i dont know it. So i tried it too many times and now its saying it is disabled, connect to itunes. but a problem is that my power button on top is broken. how to i fix it?
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Hi,
My iphone has locked me out and says iphone is disabled connect to itunes. but my itunes wont connect with my iphone. i've tried everything i can think of and my phone is still locked and i cant sync it with itunes. what else can i do??While connected to iTunes, try...
http://support.apple.com/kb/HT1808 -
I need some helpful instructions on how to get my iPad back to normal because it says iPad is disabled connect to itunes. I've gone through the restoration process many times and it does not work. The iPad just seems to fail when its almost done restoring. Much help is needed please!
Hi LittleKritter13,
Thanks for visiting Apple Support Communities.
I recommend the steps in this article if your iPad does not complete the restore process:
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
If the issue persists, the method in this article may also help:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best,
Jeremy -
What should i do if my ipod says it is disabled connect to itunes but my computer has broke
what should i do
You'll have to connect to another computer in order to restore. But do this first before you connect, in order not to erase your device.
Make sure the new computer is authorized in iTunes. Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
The rest of the data can be restored from the backup you made.
Restoring: http://support.apple.com/kb/HT1414
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases. -
My child has put in the wrong password on my phone multiple times, my iPhone now say "iPhone has been disabled connect to iTunes" When I hook my phone up to iTunes, iTunes then says that my iPhone can not be hooked up to iTunes because it has a password on it, but will not allow me to put in a password because the disabled message is still showing. What is the next step?
You may need to put the iPhone into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the phone and restore/resync your content to it.
-
s
Force your iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
I use my iPhone for work as well as personal. However for work, I have noticed that when someone rings me, for instance Bob Mansfield from Com tec, the phone screen states just 'Bob' and no other details. I have the best part of 6 Bob's in my contacts all with different surnames and company's. Is there a way that I can get my phone to show more info on the person calling. For instance, surname and company if applicable? Any help would be much appreciated.
See deggie's response in this post... https://discussions.apple.com/message/8531821#8531821
-
i started the update on my iphone 4 and the creen went to an apple symbol with a progress bar , then to a black screen with the apple symbol and thren to a picture of a USB with arrow to itunes. how do i fix this ,end this ??????? unable to use phone
Connect your phone to itunes and restore it by clicking the restore button, then restore from backup.
-
My iPod Touch 5th generation says disabled connect to itunes but when we connect to itunes it says on itunes that the ipod is locked with a passcode and to go onto the ipod and type in the passcode to proceed but the ipod is still locked. what do i do?
http://support.apple.com/kb/HT1212
-
So my friend had my iPod and he disabled it to where it said "iPod disabled connect to iTunes" but my computer will not connect to iTunes and I really need to know if there's a way I can restore my iPod?
Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
i have an 8gb ipod touch that says its disabled connect to itunes but it is locked..when u connect it to itunes it tells you the passscode is incorrect so what do i do , would like to get it working with out losing everything on it if i can but if not i can redo it
Do as the manual says to do and restore the ipod.
If you are unable:
iOS: Unable to update or restore -
My iPod is disabled, but not because I forgot the password. It says I need to connect with iTunes, but when I try it says I need to enter the password. What do I do?
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Maybe you are looking for
-
Error in MDDataSetBW.GetCellData for WebI report on SAP BW
Hello All, I am getting below error when running a WebI report (BOBJ XI SP3) on top of a universe built on a SAP BW BEx Query (SAP BW 7.01 Level 0007). "A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Please e
-
Time Machine Backup on External Drive Invalid sibling link
I've used time machine to backup macbook air for several months. From Feb 2011 without any problems until about 2 months ago. I started to get the message that backups could not be started. I realized that the disk would not mount right away. And
-
Run time error occuring due to the exception "CX_SY_CONVERSION_OVERFLOW",
hi, Programme which is present in process chain,is getting the error the exception "CX_SY_CONVERSION_OVERFLOW",like this. Can any body please help me out on this. Thanks & Regards, Aswini.
-
External Editor Photoshop opens in DNG instead of TIF File, Lightroom 2
How do I get Lightroom 2 to open file in TIF Format when in Photoshop?
-
Error con " Multiprocessor Support Module"
Hola Amigos !!! Acabo de instalar el Photoshop CS2 en mi computadora, y cual fue mi sorpresa que al comenzar a utilizalo, a la hora de abrir el programa, me manda un error con la siguiente leyenda. " Could not load the Multiprocessor support module b