TS2832 My laptop, after updating to Apple Remote Desktop 3.7.1 , won't boot...I get a grey square box saying I have to restart my computer by holding down the start up key. I reset the pram, and it worked for about 5 days, now nothing works??

My laptop keeps shutting down to a square box with writing that says, you must restart your computer. Use the start up key and hold it down. athen it has some writing looks like german or dutch also in the box. The first time it did this, I updated to Apple Remote Desktop 3.7.1 and I reset the pram and it worked fine for about 5 days. Then it started doing the same thing, but this time resetting the pram doesnt work for repair, and I also cant start up in safe mode now. Any ideas what happened, or suggestion on a fix for this?????
Any help would be appreciated!!!!!!

Similar Messages

Kernel Panic: You need to restart you computer. Hold down the Power button until it turns off, then press the Power button again.

I apologize for writing a book, but I think explaining the full story may possibly get me a correct answer. I hope that someone can give me some insight as to what is the problem with my MacBook Pro. I have a MacBook Pro (15-inch Early 2008), model identifier: MacBookPro4,1 running OSX Lion 10.7.5 with 6 GB memory. My wife first noticed a problem with the display. Every so often it would get fuzzy with jumping lines going across the screen making it vitually unviewable. The final time that incident took place the computer froze which required holding down the power button to restart the computer. The computer started up to the point of the Apple logo and the spinning gear for quite some time until the screen darkened from top to bottom displaying the following message in five different languages: "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again." I have read other blogs and support communities where people get the message intermittently, but my computer would not go past that point no matter what. Through research and the Apple Store I was told that this is a Kernel Panic. The so called "Apple Genius" at the local Apple Store was unable to get the computer to boot past that point even with his gadget. It would not startup in recovery mode, safe mode or off of a disc. I forget exacty what he told me, but he said it was getting past the first two startup steps, but it would not get past the third step which is to mount the desktop. He guessed that it may be a problem with the hard drive; a loose wire or something or other. I disconnected the hard drive completely and took it out. Everything appered to be connected properly. Then I installed it back correctly, but it did not solve the issue. So I guess I disproved his theory of a loose wire... I purchased ProSoft Data Rescue 3 and connected my MacBook Pro to another Apple computer using a firewire 400 cable. I was able to get everything I needed off of the hard drive. I did some more research and I decided to restart the MacBook Pro in verbose mode (holding down the command button and V button). The computer magically started up!!! I was upset that I wasted my money on the ProSoft Data Rescue 3. I managed to take additional items off of the computer and back it up on to an external hard drive. After some time the computer froze. I repeated the power button process to restart and received the same kernel panic. I managed to get the computer to startup approximately six or seven more times via verbose mode; each time the computer staying on for a shorter amount of time before it would freeze. I managed to run Disk Utitlity. I performed first aid to fix the hard drive and it said that the hard drive appeared to be fine. After first aid I erased the hard drive and booted off of a Lion disc to perform a clean install or an erase and install. Lion installed until the progress bar got the the end where I received a message that there was an error installing Lion, please try again. Each time I attempted to install the software I would receive the same message. Eventually the computer would not boot from the Lion disc. I went back to the Apple Store and the Apple Genius was able to get the computer to boot off of his gadget where Lion istalled completely. I set up the computer as a new computer. He said that he partitioned the hard drive as DOS and then back to Mac OS Extended (Journaled) which would get rid of any errors the drive may have had. He guessed that the problem was the hard drive, but was not exactly sure. When I brought it home I installed all of the software applications I had on it previously. Approximately three days later, which may have been the fifth of sixth time starting up the computer, the display became fuzzy again and the computer froze. The computer did restart once and I was able to retreive a "log" which I have pasted below. After if froze for the second time it restarted once using verbose mode and froze almost immediately. After holding down the power key to shut it down and then restart; I received the same kernel panic after the Apple logo and spinning gear which put me right back to square one. Now the computer will not boot via any method. It freezes at the end of verbose mode which forces you to hold down the power button to shut down. I also read that poorly seated ram may cause this issue, but I removed and installed the ram multiple times. I even purchased new ram from Other World Computing (Mac Sales) 6 GB, but that did not make a difference. I think I may see six possible problems on the verbose screen mode, five errors and one warning; I will type them out here:
1. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key $Num (kSMCKeyNotFound)
2. SMC: :smcReadKeyAction ERROR: $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0
3. SMC: :smcInitHelper ERROR: MMIO regMap ==NULL - fall back to old SMC mode
4. WARNING - ACPI_SMCCtrlLoop: :initCPUCtrlLoop - no sub-config match for MacBookPro4,1 with 8 p-states, using default stepper instead
5. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
6. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key BEMB (kSMCKeyNotFound)
I was hoping that someone could read my log to ascertain wether or not they see a problem that stands out. I was also hoping that someone could tell me if verbose mode provides any information that may be wrong with my computer. I just hope that someone can give me some insight as to what may be wrong with my computer. If it is the hard drive I will easily replace it, but I want to make sure that is the problem first before I waste money on a hard drive or anything else. Please let me know if anyone requires any other information from me.
Thank you!
Interval Since Last Panic Report: 21959 sec
Panics Since Last Report:          1
Anonymous UUID:                    B62D9AB4-53DD-4F76-90B2-32453302297E
Sat Aug 31 15:20:06 2013
panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d9d774, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x0000000011d06000, CR4: 0x0000000000000660
RAX: 0x0000000000000004, RBX: 0xffffff809eb71000, RCX: 0xffffff8000892604, RDX: 0xffffff80b69d3aa8
RSP: 0xffffff80b69d3bd0, RBP: 0xffffff80b69d3bd0, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000010751b4, R10: 0xfffffffffffffff4, R11: 0xffffff8000640fd4
R12: 0xffffff809eb71000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0x0000000000000010
RFL: 0x0000000000010202, RIP: 0xffffff7f81d9d774, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000000000000010, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80b69d3880 : 0xffffff8000220792
0xffffff80b69d3900 : 0xffffff80002c4794
0xffffff80b69d3ab0 : 0xffffff80002da55d
0xffffff80b69d3ad0 : 0xffffff7f81d9d774
0xffffff80b69d3bd0 : 0xffffff7f81d8913a
0xffffff80b69d3c20 : 0xffffff7f81d89928
0xffffff80b69d3c40 : 0xffffff7f81d5be8f
0xffffff80b69d3c70 : 0xffffff7f8087f832
0xffffff80b69d3cb0 : 0xffffff7f8087f93d
0xffffff80b69d3cd0 : 0xffffff7f8088b625
0xffffff80b69d3d40 : 0xffffff7f80889c76
0xffffff80b69d3d80 : 0xffffff80006245ca
0xffffff80b69d3dd0 : 0xffffff8000657d4e
0xffffff80b69d3e30 : 0xffffff80002a3851
0xffffff80b69d3e80 : 0xffffff8000223096
0xffffff80b69d3eb0 : 0xffffff80002148a9
0xffffff80b69d3f10 : 0xffffff800021bbd8
0xffffff80b69d3f70 : 0xffffff80002aef10
0xffffff80b69d3fb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000->0xffffff7f808acfff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
         com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d590 00->0xffffff7f81e1bfff
            dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 bf000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f808ad000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro4,1 (Mac-F42C89C8)
System uptime in nanoseconds: 62230646656
last loaded kext at 53384504695: com.apple.filesystems.autofs 3.0 (addr 0xffffff7f81efc000, size 45056)
loaded kexts:
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleHDAHardwareConfigDriver 2.2.5a5
com.apple.driver.AppleHDA 2.2.5a5
com.apple.GeForce 7.3.2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AppleMuxControl 3.1.33
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyEventDriver 227.6
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.iokit.AppleYukon2 3.2.2b1
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AirPortBrcm43224 501.36.15
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleUSBUHCI 5.1.0
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.nvidia.nv50hal 7.3.2
com.apple.nvidia.nvGK100hal 7.3.2
com.apple.nvidia.nvGF100hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOATAFamily 2.5.1
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro4,1, BootROM MBP41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 6 GB, SMC 1.27f3
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7F9B0000, 0x4354353132363441433636372E4D31364643
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7FBAFFFFFFFFFF, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.15)
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS543225L9SA02, 250.06 GB
Parallel ATA Device: MATSHITADVD-R   UJ-867
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0230, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2

I had already written a book and I did not want to bombard people with more information, but in my previous research I did come across the major issues with the NVIDIA card. I also was well aware that Apple offered a replacement program that ended in December of 2012. I was going to add that in my original post, but I discounted that theory because I put my faith in the so called "Apple Genius" when I made my second trip to the Apple Store. I brought the NVIDIA card issue to his attention and asked him if he thought that may be the problem, but he said no. He said if it was the NVIDIA card that the screen would be completely black and there would be no startup chime. When I experienced the screen issues I thought it was a problem with the NVIDIA card or the logic board. I asked myself, how can a flawed hard drive cause the screen to act funny.
nbar and Rick Warren, I thank you both for your help and insight; people like you are the real "Apple Geniuses." I was hoping there was a way I could wipe the hard drive before I dumped the computer or attempted to sell it. I guess I will look into purchasing a new machine when I have the funds. Again...thank you both!

"You need to restart your computer. Hold down the power button for seve..."

Hello,
I have recently been getting this same message "You need to restart your computer. Hold down the power button for several seconds or press the Restart button." whenever I start up my computer. It happens about 95% of the time. I have been reading on different forums that I should reset the PRam and the NVRam and I have been doing so and it does help as it does EVENTUALLY start up (sometimes takes me 5-10 min. to get it to start up).
I have also read that it may be the RAM that is loose, so I did check that and made sure that the ram is properly placed (which it is).
I don't know what else I can do. Should I reformat and reinstall Mac OS X?
Here is the exact error form the dump:
IOAPIC: Version 0x20 Vectors 64:87
AppleACPIPlatformExpert::start failed
panic(cpu 0 caller 0x55c095): "Unable to find driver for this platform: \"Macbook 2,1\".\n"@/SourceCache/xnu/xnu-1504.9.26/iokit/Kernel/IOPlatformExpert.cpp:1389
Debugger called: <panic>

Well just got around to installing the new HDD and RAM yesterday, and I am sad to say... that the problem persists. :/
I reseated the memory and made sure they were in there properly, and I also installed the HDD and ran DiskUtility before I erased/reformatted and installed a fresh version of MacOSX Leopard, then updated to Snow Leopard.
As long as I am using my computer everything works fine, the problem occurs when the machine is shut off or put to sleep for a long period of time. Because when I shut it off and turn it right back on a few minutes later it works, or if I shut the lid and open it 10-20 min. later everything works fine, it's only when the machine is off or asleep for long periods of time.
So, I do not know what else can be wrong.
Should I try to take out the old RAM and just leave the new module in and see if that works out? See if that specific module is faulty?

I am not able to open my 'system preferences' it shows up on top, but the window just won't open. I haven't installed anything new, I have also restarted my computer, but still encounter this problem. Help?

I am not able to open my 'system preferences' it shows up on top, but the window just won't open. I haven't installed anything new, I have also restarted my computer, but still encounter this problem. Help?

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

MacBook Air '11 - Grey Power Button with "You have to restart your computer." message. I reopened it and looked @ the details and it said panic and then a bunch of code.

Basically I was playing my game and running Skype, talking to friends and the display flickered and then a grey box with a power button and a message that said "You have to restart your computer." It booted up fine, then I looked at the details and it said something about a panic report and the one program it mentioned was Skype. I haven't downloaded anything off of Skype. I'm scared because I just got this computer as a gift and I don't know what to do and I don't want to make it worse. It's been about 15 minutes and it seems to be running fine. I haven't started up Skype again.

Read about Kernel Panics here: http://support.apple.com/kb/TS3742
Most are the result of conflicting hardware drivers or faulty memory, but in your case it seems Skype may have been the culprit. Make sure you are using its latest version.

When I boot up my machine, the apple logo comes up and the little pinwheel comes up as if it is loading up. Then another screen comes up stating "you need to restart your computer. Hold down the power button for several seconds...." any thoughts?

I have already tried to start in safe mode. No go. I tried the single mode option as well. Volume ok. I don't have the os x disc. The computer was given to me because they could not fix the problem. Not computer smart. Does anyone have any ideas?

Apple may still supply the original restore CDs/DVDs for a nominal fee. Have your serial number and model information available when you call them. You do not have to be the original owner.
AppleCare Support Phone Number: 1-800-275-2273
open 6am to 6pm Pacific Time
Apple Phone Sales 1-800-692-7753
International Technical Support Numbers
http://www.apple.com/support/contact/phone_contacts.html
"You have to call Apple & likely ask for a Product Specialist to get it (Leopard), if they still have it... helps if you tell them you have a new iPhone (iPad) that needs it!"
BDAqua
Requirements for Mac OS X v10.5
http://support.apple.com/kb/HT3759

Every time I try to download firefox, it says I have to restart my computer when I do I have to start all over again with the same answer. Why? I have Windows 7

I run firefox then start downloading it. It states that I have to finish unistalling a previous firefox and restart my computer. I do. When Istart my computer again nothing. I start to download it again and get the same thing.every time.

Hi dweindel,
I tried watching a Netflix movie with Windows 7 on my computer and found out I couldn't because I didn't have the latest plugin for Silverlight. I'll include a Firefox link here where you can go to update all of your plugins. Check it out. It's pretty neat.
https://www.mozilla.org/en-US/plugincheck/
Also, here is another Firefox link for an article called "Install an older version of Firefox".
http://support.mozilla.org/en-US/kb/install-older-version-of-firefox
Hope this helps,
adampeebleswrites

My 5c is stuck in reset load mode and has been for 2 days

help

First, try holding down both the power and home buttons until the device restarts. Tell me what happens after that please.

New hp pavilion g4 worked for 30 days - now I get error msg when starting up

Error msg reads - Product information not valid
The following product information programmed into the system board is missing or invalid.
System Board (00A) - System Board CT Number
Press enter to continue start up -
get black screen after pressing enter
Start up test fails

http://h30499.www3.hp.com/t5/Notebook-PCs-Pavilions-Presario/System-Board-OOA-Product-Information-No...
The problem you are having can only be fixed by an HP Field Tech. I am one and I've fixed this issue before. It's an advisory that's only distributed internally at HP. Put in a service ticket. Any tech that has the latest s/n changer can fix this. Once the tech has booted the s/n changer, they'll put the info in like always, only this time, there will be two extra options. For any technician reading this, it'll ask something related to a 25-digit hex value that says (hit enter if unknown.) Instead, enter 25 zeros and hit enter. Then, on the softstylus option, just hit enter to leave it at defaults. That completes the latest version of the tool. This should fix your problem.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

What caused "You need to restart your computer. Hold down the Power button for several seconds or push the restart button."

This was displayed in four lanuages. When I restarted I was asked to submit an error report. The gave programmer details and indicated my OS 10.4 had quit. I was reading a news article on DailyMail.co.uk at the time.
I ran a Sophos antivirus scan on the whole disk and no threats were identified.
This has apparently happened a couple times previously. I thought the computer had not booted up properly since it had a black box where this message appeared and the machine was unresponsive.
Any suggestsions for cause and/or solution.

Apple won't work on it anymore. And, take it from me (hard experience: three boards changed and the G5 finally croaked from the graphics chip problem) you don't want to bring it to an AASP either, because if they are able to get a new logic board from Apple, it will croak in short time also. These were not refurbed properly. And, by now, the caps on a refurbed board will be ancient, anyway. In addition, there is a serious potential issue with the graphics chip. There was a repair extension in effect for both issues, the caps and the chip, but it's long since gone.
There might also be bad caps in the power supply.
Those three bad caps, and possibly others, are enough to bring this machine down.
There are some delicate soldering skills involved in replacing the caps. Most people with experience recommend practising first on a disposable board.
You can get a set of the caps which will fit properly from
http://jimwarholic.com/2008/07/how-to-repair-apple-imac-g5.php
There's also badcaps, who I think will work on these.
http://www.badcaps.net/
Also have a look at the posts inside these threads from resident expert spudnuty.
https://discussions.apple.com/thread/2287036?threadID=2287036&tstart=0
https://discussions.apple.com/message/11896037?messageID=11896037#11896037
And there are one or two others who will do the repairs. I can't remember right now, but I'll look into it and post here again, probably tomorrow.
Basically, I don't think you want to put any big money into this.
EDIT: just remembered another. There was another one located in Oregon and I think he's now out of business.
http://www.dttservice.com/imacg5.html
Get the caps and maybe have some local guy work on it.
Message was edited by: WZZZ

My ipod touch wont turn on. i tried holding down the power and home button for about 1 min nothing happened i then plugged it in to my laptop and tried to restore to factory setting.A pop up message sayin an unknown error now its a blank screen.what to do

how do i fix it?

What was the exact wording of the error message? Usually a number or other information is provided in addition to just saying unknown error.

I cant force quiet or relaunch the finder. it says"not responding". Although other apps are running just fine. I've tried restart several times/force shut down several time. I am using a mac book pro retina, Mavericks 10.9.5.Nothing works. Any idea??

How do i quiet finder?i can't force quiet or relaunch finder. it says' "finder not responding". Therefore I couldn't shut down. I've tried to force shut down & restart several times. but still finder won't quiet. Any idea please???? I am using a macbook pro retina with Mavericks 10.9.5.

Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/
com.apple.finder.plist. Move the .plist to your desktop.
Re-launch Finder by restarting and test. If it works okay, delete the plist from the desktop.
If the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

You need to restart your computer. Hold down the power button until it turns

Krijg af en toe bovenstaande vervelende mededeling

Dit staat bekend als een kernel panic. Het is gewoonlijk, maar niet altijd door de hardware met het geheugen vaak de hoofdoorzaak. Zie deze FAQ (in het Engels) voor meer informatie: http://thexlab.com/faqs/kernelpanics.htmll

Updating Acrobat using Apple Remote Desktop

I'm pretty sure I already asked this yet I can't find the post so I need to ask again.
I need to update Adobe Acrobat 9 and Adobe Reader 9 remotely - without having to touch every Macintosh the software resides on. I would like to create a cumulative package and install updates using Apple Remote Desktop. I have looked at the Enterprise Deployment software and documentation, yet I don't use Adobe Creative Suite - I only use Adobe Acrobat 9 and Adobe Reader 9.
I have users with varying versions of Adobe Acrobat 9 and Adobe Reader 9, so downloading one version update won't work. What I need is a cumulative updater containing updates from 9.0 through 9.4 for both products that can be deployed via Apple Remote Desktop.
Is this possible and if so, how?
Thanks for any assistance.

We have the same problem. We can mass desploy CS5 with a package made with the Adobe Application Manager Enterprise Edition application. But Acrobat is not supported by AAMEE. Making my own package based on the information on http://www.osxdeployment.info/wiki/CS5_Repackaging_Guide doesn't work for us.
We have more than 300 Macs and it's impossible to do the installation manually.
Adobe should provide a standard pkg for Acrobat Professional 9.3 (part of CS5 DP & WP Suite).
FYI a trial of Acrobat X is nowhere to be found for Mac: https://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro

Apple Remote Desktop 3.7.1 lag problem

Hello,
Since updating to Apple Remote Desktop 3.7.0, I have had this problem. I just updated to 3.7.1 and the problem is still occuring.
I am using RealVNC Viewer 5.0.6 Windows 64bit on a Windows 7 machine to connect to my Mac through Apple Remote Desktop VNC.
It's tricky to describe the problem, but I'll do my best:
Remote desktop is quick and responsive (I'm using it over an internal network)... Except for the last frame of any sequence of frames. For example, if I scroll a window quickly, the intermediate frames showing the scrolling come through quickly... But the last frame that my screen settles on takes up to a full second before it comes through.
You can reproduce this problem most easily by opening up a terminal, typing a command, then pressing return. Or, press return multiple times in rapid succession: The first few returns come through fast, but the last one always comes through slow, up to a full second later.
I never had this problem before the 3.7.0 update. Any progress on fixing this issue?
Thanks,
Allen

I agree the new Remote Desktop 3.7.1 is very laggy. All my machine are up to date with patch, same issue..
Gary

TS2832 My laptop, after updating to Apple Remote Desktop 3.7.1 , won't boot...I get a grey square box saying I have to restart my computer by holding down the start up key. I reset the pram, and it worked for about 5 days, now nothing works??

Similar Messages

Maybe you are looking for