TS2972 My library will not load on Apple TV following latest iTunes upgrade

All was working fine until the latest iTunes update was installed. Now my photos strem and my screensaver still works but I can't access the library as it will not load. Have tried all troubleshooting tips on Apple TV help.

Same thing happened to me. Reset your router.

Similar Messages

Shared library will not load

My Shared library will not load. I see it in the list, but when I click on it the status indicator runs for a while and then it just goes back to the local library.

I also have this problem. I have a mac running os snow leopard and my dad has a pc running windows vista. he has no problem taking my music via home share, but I cannot load his library. I click on his library and it loads for a little while and then bumps me back to my local library.

My resume will not load on Apple's career site. I've tried PDF format and Docx. When I hit upload and go back to my profile, nothing is there. Any thoughts?

My resume will not load on Apple's career site. I've tried PDF format and Docx. When I hit upload and go back to my profile, nothing is there. Any thoughts?

Hi Mac Attack,
My computer will not disconnect from the internet. It seems to find a clone router and continues even when I shut down and unplug my my own home iy
Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
Have a look at your settings in Safari > Preferences. Especially General and Privacy.
Reset Safari to remove cookies and other stored data.
System Preferences > General
Have a look at your settings in System Preferences > Security & Privacy.
Call back with more questions.
Regards,
Ian

My Mac will not allow me to downlode the latest iTunes and now I can not connect my phone and computer. THis is very frustrating! HELP!!!

My Mac will not allow me to downlode the latest iTunes and now I can not connect my phone and computer. THis is very frustrating! HELP!!!

Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac". Write down what it says about "version"and report that here. Now continue to "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
Even my 12 year old Mac lets me download the newest iTunes. Of course I can't install it but any computer can download the installer files so we need to know precisely what you are trying and what error messages you are seeing.

Itunes library will not load unexplicably...

i have itunes 8.0.1.11 and without any error messages or prior problems started up my itunes program and the library i have will not load...and it is completely blank of any of my library or music files.
my music will play when i click on it from the files created by itunes.
i realize that i can drop all my music files onto my itunes and they will play but i have spent tons of time creating playlists, adding ratings, adding cover art and genres to my preference. it would be a heartbreak to have go back through it and organize.
how can i restore my library?
i have double clicked on every library file in my itunes folder as well as dragging them into my itunes music player.
please help!!

Did you have your library file iTunes Library.itl on the external drive?
If you did, you could try a shift key start - hold down the shift key while starting iTunes and you should be asked to choose a library. Navigate to the location of your library file on the external disk and choose iTunes Library.itl.
If you had your Library file in the iTunes folder on your c: drive, it has most likely been damaged and iTunes has created a new one.
There is a small possiblity that you can reacreate it from the xml file:
http://docs.info.apple.com/article.html?artnum=93313
Otherwise you just add your iTunes Music folder to iTunes with File>>Add folder to library. This loses all counts ratings and playlists.
Be sure you have the location of your iTunes Music folder correctly set in Edit>>Preferences>>Advanced>>General.

Itunes Library will not open!!!!! itunes Library will not open!!!!!

Hello,
This is very frustrating that hundreds of people view these questions and only a few people answer. The issue here is that my itunes Library will not open. I'd sure like to know what is causing this and if it's gone forever.
WinXP. Pro.
I have many Mp3 music files under the same playlist names as in my ipod, i:e: Country,Jazz,Blues,Classic Rock, Alternative,vocal,light sounds,etc. When I drag new mp3 music files into my ipod library,then sync to my ipod, Itunes makes a backup of itune music files in their folder..I think. Anyway, those mp3 muic files are still on the Hard drive,but I can not open up my itunes Library. is it Gone????
Sooooooooooooooo...I was slap-happy in upgrading my itunes software for my 80GB fith gen ipod for the kick of it. I downloaded the new updates.then tried to open my itunes library and it wouldn't open...I hooked up my Ipod thinking that may help open up the Library,but nothing.
I tried the system restore,nothing. I uninstalled itunes,then reinstalled the itunes/quicktime download from apple. I clicked on the itunes icon on the desktop a few times and then a few times more,nothing. I guess I'm missing the itunes.ink file to open this up. regardless, I went to the Windows/Start/programs/itunes...nothing again. Windows Explorer/C:/ program files/itunes...nothing.
I was afraid when I uninstalled the itunes software from before,it would erase the itunes Library,but the music is still on my hard drive,I just can't open the itunes Library. At this point,I should buy an external hard drive and transfer all my Mp3 files and the itunes music files/podcasts/photos,wipe the hard drive,reinstall the O.S. and start all over again.
I'm guessing I am out of options with this itune Libray. Any suggestions? Thanks, Jim

Still unanswered. I'm still trying to install itunes so I could use the library. I am removing Mp3 files from my hard drive to free up space,so if I ever do get the itunes setup,I'll have to remove the SYNC and do the manual so I ONLY transfer Podcasts into the ipod and not lose them becuase of the unchecked boxes.
Ok, I uninstalled EVERYTHING that has to do with Itunes/ipod from the computer..Add/remove programs, serch all files/folders,Windows Explorer,Start>All programs,the Itune reference. Turned off all my Firewall,spyware,and anti-virus,,downloaded the new 7.5 version Itunes/ipod...saved to desktop,installed the new software...then NADA! NOTHING! I can click on the shortcut desktop icon, and all the other ways to click the software open, but nothing. peole on other sites reccomend Tag and rename and use the Winamp media Library,because of all the lack of personal customer support APPLE lacks. I guess I was a Big FOOL to spend my hard earned $350.00 for this ipod.

Bridge Messages will not load messages after 1.0.6.2390 upgrade

After I updated to 2390, messages will not load, after about 5 minutes it will display content of last message but left side message list will not populate. I just keep giving me the GREEN CIRCLE WAITING and will not load messages. This is the first time I've had any problems with bridge messages. All the other bridge apps (calendar, notes, contacts, bridge browser) all work. I un-installed bridge from my phone (ver 1.0.0.93) and re-installed it, still no luck. I re-booted PB, no luck. Is anybody else having a bridge message problem since 1.0.6.2390 update.

tboyd wrote:
Knottyrope, I deleted all bluetooth profiles, phone and PB, did battery pull on phone, playbook reset. paired phone with PB and after 8 minutes I can see the header of 1 email message and under the All messages list on left side it is blank and the GREEN CIRCLE of WAITING is still spinning.
Calender works, contacts works, Bridge browser works, bridge files works, but bridge messages will not load.
I never had any problem with bridge messages working through all the previous OS upgrades.
If you did all of that, then maybe there is an issue we cant help with, please call support to get your PlayBook logs, so RIM can address it in a future release or maybe they have a fix we dont know about.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

TS2972 Itunes Library will not stream to apple TV

I can find my itunes library on my apple TV, but it will not stream. it just continues to buffer, and does not load the movie. Is there a way to fix this? Everything used to work just fine before today.

Solution:
I had the same problem. Apple TV worked, because I could stream the BBC iplayer from my iPad, it was just iTunes that was the problem. However, I just downloaded the latest Apple TV update and bingo!

Rental movies will not load to apple TV. Problem is just within last10 days or so.

Last week I was going to watch a rental that was close to expiration. Well to my surprise it would not load. Well now that I have selected it it needs to be watched with the next 24 hours. So I set to attempt to solve the problem. iTunes and Apple TV software are current. Apple TV is getting good signal strength from WiFi network. Restarted AppleTV. Purchased movies load fine from both computers. Netflix loads fine. Where is the problem

That will reset the connection. If it happens again then it is likely a network issue, doing a test on Apple TV will not be a good indication, and it will require troubleshooting of the network.

Instruments in Logic Pro 9 Library will not load: I try to add a new instrument on a project and get a "cannot be found" error.

Ladies and Gentlemen,
As a faculty member in the School of Music, I have just acquired a copy of Logic Pro 9.1.8 through my University. The programs and instrument packs were installed by our IT department and show as being fully installed on Logic Pro when I search for additional content through the Logic Pro tab at the top of the screen. The window shows that all 6 Jam Packs, Logic Pro & Main Stage Content (Essential and Additional) GarageBand content, and Surround content is installed. However when I try and add a new instrument on a project, most of these instruments cannot be found. I get the following error:
Audio file “KB_pizz_f_C1.wav” not found!
I then press the Continue Tab, and it looks for the instruments in an empty file that Logic creates in the Music section of the hard drive. I have investigated the sounds by going through the MAC Hard Drive>Library>Application Support>Logic>Sampler Instruments folder, and tried to copy the sounds into the Music>Logic folder created by the program. That does not work either. Even attempting to go into these Logic Pro instrument files one at a time has proved fruitless. I am told that the file cannot be opened.
The files appear to be installed, but cannot be accessed or opened. They all have that translucent grey appearance when I attempt to click on the icon. This is true for about 80% of the files in the instrumental library. Whenever I create an instrument, the EVP88 Electric Piano is installed by default. There are a few instruments that I can successfully replace this default instrument with, but a majority of the instrumental library remains unavailable. Can anyone help?

Kurt:
You might try a different way of adding the video files to the web page. This demo page has one where the file does not load until the play button is selected: Opening Item in a New, Precisely Sized Window. This demo page has 9 short videos on it using that method: PhotoPresenter Animated Slideshow Themes. Just add a screenshot of one of the movie frames or any photo you want and add the Play button on or below it.
You manually upload the movie file to your server so iWeb is not involved in the uploading the file at any time.
Similarly this demo page, QT movies via iFrame, has a method that has you manually uploading the file to the server and linking to it via iFrame code. That page also has other similar methods.
Another method is demonstrated in Roddy's iWeb for Musicians site on his Video page. Here you also upload manually.
OT

Shared library will not load on my iPad.

In the videos app on my iPad, when I click on the shared library tile under the 'Shared' button, the library loads until the indicator gets halfway, and then it just stops. However, in my iPhone (4, iOS 6), the library loads almost immediately. The library is also available on my appleTV.
I've tried quitting the apps involved (iPad Videos app, iTunes on the computer), and restarting both the iPad and iMac.
This problem is intermittent. It was working fine last week, although this has happened twice before, and I cannot figure out what resolved it.
What gives?

I did talk to Apple Support about a month ago, and they walked me through shutting down Home Sharing on my Mac and all devices, and then restarting all hardware, and then restarting Home Sharing on everything.
This got my library to finally load, and I was able to stream the movies to my iPad. But it lasted for less than a day, and now I'm back to where I started, unable to load the library in the Videos app or the Music app.
I don't have to do this with my iPhone (4, OS6) or appleTV, and I certainly don't want to reboot everything in order to stream a movie or music onto my iPad.
Again, Apple, what gives?

Non retina 15" MBP will not wake up after sleep following mountain lion upgrade

I have an early 2012 15" 2.2 MBP with the 4gb video card. since upgrading to ML a lengthy sleep renders it unresponsive. it will not wake up and will have to be force shut down, then restarted to use. you can here the hard drive spin up after a long sleep (6-8 hours) but only after you hit the power button. even so it's completely unresponsive until restarted.. i noticed apple released an update for retina MBPs for the same issue. unfortunately they have not released the same update for non retina users yet.

Since you had NO problems before ML upgrade:
Not to side with the tech or you, because upgrading OS can be frustrating (it shouldn't).
It appears that you need to do a reinstall (backup first). Its pretty simple to reinstall, just go to boot drive and reinstall. You'll probably have to reinstall print drivers, other than that it's pretty straight forward.
A couple of things I'd do before and after reinstall is to repair the disk (3 times each) while in the boot drive. Then once completed choose the startup disk in system preferences or at least verify it's the startup disk, then repair permissions. If you add apps or printer drivers repair permissions again.
A major problem for lots of folks updating to a new OS is they don't think about disk health....And that's why it's important to insure everything is in mint condition before upgrading to a new OS. The same reason many choose to do a FRESH install of a new OS, by zeroing out the HDD (or SSD) and then repairing the disk and then installing the new OS (you MUST have a solid backup before doing so).
I always have at least 2 solid backups before doing so, but that's me. 100% of the time I do a fresh install of a new OS.
I have a spare computer I use as a test machine for a week or so by upgrading without fresh install. After figuring out all the possible bugs with the test machine I do a clean install of my other computers and once there stable I do a fresh install of the upgraded one.
Not a lecture on how to do things just my procedure which has served me over the years without any problems.
I have photos, videos, documents, and financial records dating back to 1991 so I must be doing something right.

Library will not load.

When I try to load the Aperture Library I get the following {"Aperture Library.aplibrayt" is an iPhoto library and cannot be opened in Aperture. You may import your iPhoto library into Aperture using the File menu.} {Quit}. Quit is the only option. In the background I can see the photos and the folder/projects in the sidebar but can not access them. If I quit it closes Aperture. I have tried to import the file as an iPhoto library as it suggests but that does not work. Help! I have also tried to use time machine files to load but get the same thing.
Ideas?

If you select the library in the finder and click Get Info what does it say for kind?
With Aperture closed, If you double click the library what happens?
Select the library in the finder right click and slect show package contents, take a screen shot of the finder window and post it.
Finally if you can copy the following two lines into the AppleScript editor and run it then select the library what is returned?
The returned string will be displayed in the bottom window of the AppleScript editor.
set the_file to choose file
tell application "System Events" to get type identifier of the_file

When home sharing, a library will not load.

I have an old imac running itunes 9 and a laptop pc running itunes 10.
The Imac can access the laptop library. My laptop recognises the imac library, but when I click on it, it tries to load it then just stops and goes back to its own library.
Could anyone identify any reasons for this. Help is much appreciated.
Geoff

And perhaps if someone at apple could actually make it so the tags we type in to help with these issues show up exactly as we type them and not as a jumbled mess, then that would be useful too.
I have an imac g4 running os10.4.11 and itunes 9 trying to connect to a latop running windows 7 and itunes 10.7
Cheers

HELP!!!! My iTunes Library will not load...

So, I uninstalled the Safari tool, I never use it. I restarted my computer and now my iTunes library is empty. I try to import the library from my music folder, and I get an error that says "The file iTunes library.itl cannot be imported because it does not appear to be a valid exported file"
What the heck did I do? And is there any way to fix it? All of my playlists and podcasts and purchased music and TV shows are gone. !!!
Thanks in advance...

Did you have your library file iTunes Library.itl on the external drive?
If you did, you could try a shift key start - hold down the shift key while starting iTunes and you should be asked to choose a library. Navigate to the location of your library file on the external disk and choose iTunes Library.itl.
If you had your Library file in the iTunes folder on your c: drive, it has most likely been damaged and iTunes has created a new one.
There is a small possiblity that you can reacreate it from the xml file:
http://docs.info.apple.com/article.html?artnum=93313
Otherwise you just add your iTunes Music folder to iTunes with File>>Add folder to library. This loses all counts ratings and playlists.
Be sure you have the location of your iTunes Music folder correctly set in Edit>>Preferences>>Advanced>>General.

TS2972 My library will not load on Apple TV following latest iTunes upgrade

Similar Messages

Maybe you are looking for