TS3048 The keypad is not registering with my macbook pro - changed batteries but still not working.  Bluetooth says it is connected.  Suggestions please.

My bluetooth numeric keypad is not registering with my macbook pro - changed the batteries when the light started blinking - but won't work.  Bluetooth says it is connected.
Suggestions please.

Your MBP sees the Bluetooth keyboard but won't pair with it probably because the keyboard is pairing with another computer or device nearby. If you had previously paired the same keyboard with another device, go to the other computer or device and either unpair it or have the device "forget" the keyboard. Then you will be able to pair the keyboard with your MBP.

Similar Messages

  • I replaced my hard drive and lost iPhoto. Is there a way to retrieve?  I can not find the starter discs that came with my Macbook Pro.

    I replaced my hard drive and lost iPhoto. Is there a way to retrieve?  I can not find the starter discs that came with my Macbook Pro.

    Customer Service: Contacting Apple for support and service - this includes international calling numbers. You can purchase replacement discs from Apple.
    Or, you can upgrade to Lion or Mountain Lion:
    Upgrading from Snow Leopard to Lion or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
    If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
    A. Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
    B. Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • HT4623 Why my iPhone 5 is not Comparable with my MacBook Pro when try to play music by Bluetooth

    Why my iPhone 5 is not Comparable with my MacBook Pro when try to play music by Bluetooth can anyone help

    Hi katherine cordelia,
    Welcome to the Apple Support Communities!
    If your iPhone is not being recognized in iTunes on your Windows 8 computer, I would recommend reading over and performing the troubleshooting steps in the attached article.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Have a great day,
    Joe

  • Why I dont have the OS X instead DVD with my MacBook pro?

    Why I dont have the OS X instead DVD with my MacBook pro?

    If you were running 10.7 or later, and had a normal install, there are two ways to get there
    Command-R at Startup is the usual method.
    Option key at Startup draws a gray screen and puts up an Icon for each Bootable Volume. Among them should be Recovery_HD. Choose that and proceed.
    The Recovery_HD partition is treated as a special case, and is NOT shown by default in Disk Utility. There are parameters you can change to get Disk Utility to show all partitions.

  • In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

    In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac.

    I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lion, so the only difference was the iMac versus Macbook Pro.

    I just tried this, no luck...
    I connected a different USB cable, still the same problem. Tried both cables with the problematic hard drive on two different computers, still the same problem.
    At this point I assume I'll probably need professional help in saving the files, thanks for the assistance.

  • HT1750 I tried to restore my iMac with my MacBook Pro Cd's but the computer say that the cd is not supported on the iMac,Now it does come out because there's no eject button on the screen.How could I take it out an how could I install the OS X Lion ok wit

    I tried to restore my iMac with my MacBook pro CDs but it's seem it got restored but it say this cd is not supported on this iMac, What could I do to take out the disk?

    Also, if you have Lion on the computer. You have a recovery partition on the drive. On startup hold down 'Control' to bring up your startup menu. Select "Recovery HD". That's how you get to it. Lion's recovery partition acts as the installation discs that came with all previous versions of OS X.

  • HT3964 I have an iMAC with OSX version 10.6.8 - the photoboth does not function and says "no camera connected?  Does anyone know how to solve this problem?

    I have an imac with version OSX 10.6.8, and the built in camera no longer works, and says "no camera connected."  Does anyone know how to fix this problem other then bring the machine back to Apple?

    Look to the right for the section called "More Like This" , any threads that are marked with a green checkmark are answered.

  • Utility Airport can't see Airport Express on my MacPro, although the same AE operates properly with a MacBook Pro

    I've unsuccefully spend almost three days on the web to find the solution to a particular problem.
    The configuration  I'm running is as follow:
    - one Airport Express attached to the Orange box to communicate through internet
    - one printer attached to the AE through USB
    Two Mac :
    - one MacBook Pro : it operates with no problem using the AE and the printer, internet is fine since I write this message with that Apple. The two machines may operate simultaneously under different or identical softwares.
    - one Macpro : two points:
         * the Airport utility does not see the Airport Express, but the AE logo is fully active on the computer and I can read information with Preferences/Network.
         * the Network diagnostic, launched from the MacPro, yields GREEN from Airport to FAI included steps ( green LED), but fails at the Internet step (red LED)
    The computers are in the same bench, the AE being at 2 meter distance with no shield in between.
    The Orange box is proved fine since all the internet communications are OK when I use the MacBook Pro . The phone is fine as well.
    There are no other WiFi in the neighbourg.
    The problem occured on Sunday evening for an unclear reason, while I was trying to connect a window XP based PC to link to the printer using the same wireless network ( I miserably fail as well, although the PC sees the Airport Express, but no way to connect to the printer : this is another issue )
    The full network is running permanently for a couple of years with no issue, no fault, no reset, no slow down, just fine !
    Both machines use the same OSX 10.6.8.
    Information system returns the same data when reading the Airport network file.
    Of course, the Airport Express yields solid Green light .
    I've already checked the trouble shoot procedures as recommended by Apple with no success.
    Well, this is a major issue since I do need my MacPro to handle work that must go through the internet.
    Any advise and/or recommendation will be highly appreciated.
    Michael

    Hello,
    Finally, I solve the issue by re loading the mDNSResponder which has been deactivated for an unknown reason. The system is back to normal operation.Thank so much to the Krypted.com site to provide the appropriate command to handle theplist file.
    Michael

  • What are the default apps that come with a macbook pro Mid 2014

    Hi all,
    so what happened is that I forgot my password (the computer's) and I did erase all and came back on the factory reset. All is fine so far, but I am missing a lot of my apps - I sure did chat with apple and they made something so that I can get my Pages and etc back, but seems like I am missing a lot. I will show a screen shot to see the current situation. I use MacPro Mid 2014, from apple online store.

    http://www.apple.com/macbook-pro/built-in-apps-retina/
    If you suspect something is missing, describe what you think it may be. The programs in your screenshot appear to be the correct ones.
    Be careful with torrent clients...

  • My hard drive crashed, and I cannot reinstall the original OS that came with my macbook pro?

    I bought my macbook pro (mid 2012 version) 10 months ago and it's been working fine up until now (running on Yosemite). When I opened the lid today, a flashing question mark appeared on the screen. I restarted my mac while holding the option key. I tried to do an internet reinstall but I can't get it to work. When I try to reinstall the OS that came with my mac, there are no options for me to click when asked to select a disk.
    I have tried following instructions from multiple threads about how to change the disk utility.
    Options on the lefthand side: "disk0" and "mac OS X base system". Options on the right: disk0 - first aid, erase, partition, and restore. Mac OS X base system - first aid, erase, restore.
    None of the solutions I've found online are working for me. Most of the options in the disk utility menu are greyed out, so I can't click on them.
    Sorry for any typos, it is hard to type this all out on my phone. I have tried to upload pictures, but it doesn't seem to be working. I also apologize if this is in the wrong category.

  • Airport express with my MacBook Pro flashes yellow but . . .

    is working. It normally always went to green when the signal locked but for some reason now it continues to flash yellow but is working.
    I looked for another area to post this but couldn't find where it is covered.

    It should actually be in you Applications/Utilities folder. Part of the system install. If it is working okay, it is not a great problem the light flashing. But some things will not work right at some point. If you are moving soon, why not wait till you get there and set it up again. I am pretty sure it is a software thing. Have had it myself.

  • The number "1" on the keypad is not working well - I keep getting "2" when I want "1" - any way to calibrate the keypad?

    when i try to type a number, it's almost impossible to get a "1" - I keep getting "2" instead of "1". It's quite frustrating. Is there a way to calibrate the touchscreen?

    No way to calibrate the touchscreen.
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    Also, try typing in landscape.

  • Why isnt my chat on the facebook app not working it says"No Online Friends"

    i downloaded the new facebook app for iphone 4. it worked fine when i first purchased the phone which was yesterday. recently worked this morning and now it says "no friends online" why has this happened? how can i fix this?

    Did you always have the same problem or is it new? I always used to be able to get Facebook to work on wifi with no issues for months. I downloaded the new software update for Revolution, and all of a sudden it seems like they blocked the Facebook app somehow unless you're on 4G. It really sux because I can't get into my Zynga games either that are tied to FB! Wish someone at Verizon could be aware of this and fix the problem.
    Also, interestingly, when I try to log into the Facebook site with the browser I am directed to an error page. The browser works fine for every other site though. Really seems like there was some kind of block instated that will no longer let you use Facebook on a wifi connection. 

  • Can I Split the screen of my imac with my macbook pro

    I have an old macbook pro that I'd like to use as an extra screen/display for my imac. Is that possible?

    http://support.apple.com/kb/HT3924

Maybe you are looking for

  • Error while extracting data from essbase

    Hi All, Now I'm tring to extract data from essbase by ODI, and at the sametime, I need to do some transformations, such as join with other relational tables or flat files to get more information about metadata. But unfortunately, once I add join into

  • Now Windows 7 won't install..

    Hey everyone You may need to know the previous issues ive had in order to fully understand my situation. http://discussions.apple.com/thread.jspa?threadID=2290449&start=0&tstart=0 Pretty much, no hard drive will work inside the macbook pro except the

  • Dynamic Header during HTTP post.

    Hai Experts,     Is there any option to pass source filename which is going to be dynamic(ie any text file with any name ) as a header in HTTP post to a URL? To be more clear on my question I am doing a File to HTTP scenario.In the source directory a

  • Internal error - code 302 on setup

    WRT610N router - Vista operating system I had to format and reinstall Vista and am attempting to re-install the setup software that came with my router.  Each time I try, the installation stops and an error message tells me there has been an internal

  • Comment installer Adobe Create PDF sur un nouvel ordinateur ?

    Je viens de remplacer mon ordinateur. Comment dois-je faire pour transférer mon abonnement Adobe PDF Pack, sur ce nouvel équipement ?