TS3147 Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers!  Everything is connected but I get an "idle" message in the queue.  I have "Reset printer system" and re-added these printers. No luck. H

Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers!  Everything is connected but I get an "idle" message in the queue.  I have "Reset printer system" and re-added these printers. No luck. Help?

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device.  A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

Similar Messages

  • I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing".  Can anyone help with this?

    I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing".  Can anyone help with this?

    It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.

  • I suddenly am unable to retrieve my emails.  I discussed this with my Internet provider, but still get an error message and can't access my emails.  Any suggestions???

    I am unable to retrieve my emails since yesterday.  I called Time Warner Cable, my Internet provider, but they could not help me; they stated that the settings had changed, since they were upgrading.  I adjusted the settings, but still get an error message: 
              Alert
              There may be a problem with the mail server or network.  Verify the settings for account "Mail 1" or try again.
              The server returned the error:  The connection to the server "smtp.roadrunner.com" on port 110 timed out.
    I changed the server, and the port, as Time Warner Cable tech rep recommended, but to no avail.  They recommended I delete my current email account and recreate it, but that I check with Apple first, because I might lose my contact list (and any email messages I'd previously saved!?).  They suggested Apple might be able to tell me how to not lose the contacts, emails, profile.
    Any help would be appreciated. 

    Hi, what Interface are you using, & which one are you checking?
    Each Interface will have it's own settings.
    Though all of these steps may or may not be needed, I'm including them all.
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.

  • Has anyone experienced a problem with the adjustment brush since last update (for Mac) last week?

    Following an update to Lightroom on my Mac Pro work station last Friday: when I apply my adjustment brush to an area in an image, a faint box encompassing a much larger area than the size of my brush appears (extends well beyond the area I've identified with my brush and is clearly a large square shape). When I release my mouse, the adjustment I've made affects my entire image. I had no issues with adjustment brush prior to the update. I've been on the phone with Adobe support (no help). Have uninstalled/reinstalled Lightroom several times (no help). Adobe directed me to Apple (recommend use of Time Machine to date before Lightroom update came through). To ensure it's an isolated bug, I checked my MacBook Pro. Worked fine without update; I let update come through and find the adjustment brush "bug" is intermittent. When it occurs, however, I always see the larger "box" area, and the adjustment brush ultimately affects my entire image.
    Anyone else experiencing this? Adobe support insists it's a Mac issue. Thanks!

    Hi,
    Following an update to Lightroom on my Mac Pro work station last Friday: when I apply my adjustment brush to an area in an image, a faint box encompassing a much larger area than the size of my brush appears (extends well beyond the area I've identified with my brush and is clearly a large square shape).
    Same problem (rectangular areas) + others under Windows. The adjustment brush and the clone / heal tool have been totally broken in LR 3.2. You're not alone. See this thread. I have filed a bug report. No answer until now.

  • HT1338 Software Update is not finding latest release (April 3) of Java 2012 001 Update for Mac OS X Lion 10.7.3 on iMac mid-2007 that downloaded automatically on iMac mid-2011

    Software Update is not finding latest release (April 3) of Java 2012 001 Update on my iMac mid-2007, but it downloaded it automatically on my iMac mid-2011 yesterday. Both are running Mac OS X Lion 10.7.3. When I try to download the update manually from Apple on my older iMac, it downloads okay, but when I try to open the dmg file, I get a warning message saying that opening this update may make your computer LESS secure. Do you want to proceed? (I did not).
    Why would Software Update find this update and install it automatically on one iMac and not the other, if they are both running the same version of Mac OS X Lion? I checked the installed software list on my old iMac and the Java update does not appear there. Why would this update make my old iMac less secure?

    Recall that Java is not installed as part of Lion.
    You have to install it (and are asked if you want to) when you first try to run some java stuff.
    Is it possible that the iMac 2007 does not have Java yet?
    Try this: open Terminal (from Utilities) and type java -version (exactly like that, with the space before the hyphen).
    What do you get?
    Consistent with this theory is that the dmg thing gave you the warning - installing java might make your machine less secure because java is a means for bad guys to try to do bad things to your computer.
    charlie

  • We need to open the connection each time you read a message from the queue?

    Hi
    I have a doubt regarding my queue read data that contains those I create a session and connection.
    Whenever I do this or you can create a connection and get all data from the queue and then close the connection and session
    eg. I have 1000 files in the queue and I read all files but without creating a session and a connection every time you get a single figure, this can be done?
    I read the 1000 files without having close the session or the connection
    thanks for the help.

    I answered myself.
    No need to open a connection and a session each to be read from a data queue to extract the entire contents of the queue with only one session and open a single connection.

  • I have used migration assistant to shift my contents from another Macbook Pro, but are getting an error message 150:30. I have deactivated the software on the old machine and done a restart on the new one, but still get this error message

    As above - first time I have used a forum, so thought I had to put all the details into the heading

    Migration assistant doesn't move all the necessary files.
    You really need to reinstall your Adobe apps on the new system to get all the support files in the right place (and with the right permissions).

  • My ipod will not sync with itunes.  The computer says its there but itunes does not.  I've tried everything suggested.  I keep getting an error message at the very end.

    Here is the error message I get.
    When iTunes does install, my ipod still won't sync because it's the wrong version.  I've tried doing the version it suggests and still nothing.

    Refer this article to fix your Registry error.:
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299
    Refer this article for Device not recognize in iTunes:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • I have windows 8, 64 bit.  I am trying to install ITunes 64 bit installer, but keep getting an error message that says a .DLL file is missing.  How can I fix this?

    After installing, whenever i try to open the application, it keeps popping up that some or the other .dll file is missing.
    When I install that particular .dll file and then again try to re open, it says that someother file is missing. It keeps
    coming all the time.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I'm trying to sync my ipad to the itunes library - but I get an error message saying I Tunes Library full.  What can I do?

    I have an Ipad 2. I am trying to sync my ipad to the itunes library, but I get an error message - saying the itunes library is full.  How can that be? I've deleted lots from the library to see if that would help - but it still states I am about 25gb short.  Can anyone help what to do?

    Could any of the music have been sourced on an external USB drive or a network drive? In iTunes, go to one of the songs that won't sync. Bring up the info page, and look at the location of that song on the disk. Does that file and path exist? That could be your problem, especially if they were on a USB drive you forgot about.

  • Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8

    Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8.

    Also when I click on the link in my email to activate my account (in the hopes that a solve will be emailed to me) I get this message -
    "Something is wrong
    We could not activate your account. Please make sure that you have clicked the correct link in your email or typed in the correct address."
    Same message if I cut and paste the link.

  • Since Apple's last Update on 6 June 2014, I have been unable to Import photos from any source. I receive a message saying, Importing photos but nothing happens. When I click on Stop Import, nothing happens. I must press the On/Off button to exit iPhoto.

    Since Apples last update on 6 June 2014, I have been unable to Import photos from ANY source. When I attempt to do so, I receive the message "Import  Preparing to inmport..." I've waited 10 minutes but nothing happens. When I click on the icon, Stop Import, nothing happens. When I attempt to Close iPhoto i receive the message, "Photos are being imported to the photo library. Please wait for import to complete." When I click on OK, nothing happens. The only way I can exit iPhoto is to press the On/Off button.

    After loading this file I was sucessful in importing photos from a web site, my camera memory card and a CD containing photos.
    That is a good news.  We now know, that iPhoto is working as expected, when you are switching to a different library.
    But this is puzzling:
    I then see a box with two Librarys listed, both have the same name except for the following and are listed as:
    iPhoto Library.photolibrary but one has (default) after its name which is the one which is always displayed when I load iPhoto.
    Underneath the box is written:
    /Users/paulfkardian/Pictures/iPhoto Library.photolibrary
    Underneath this are three boxes titled: Other Library    Create New    Choose
    I highlighted the the File without the (default) after its name and clicked on Choose. A Library was loaded which had my photos (about 9,822) from about 7 months ago. Underneath the box is written diferently than the file always loaded and says:
    /Users/paulfkardian/Pictures (original)/iPhoto Library.photolibrary
    You are having two "Pictures" folders in your Home folder, Pictures and Pictures (original)? And each has a different iPhoto library - one working correctly, and one not?  Do you remember, when this second "Pictures" folder has been created and what caused it?  Did you restore your Home folder from a backup some time ago?

  • Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. Is anyone else having any similar issues?

    Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. It seems to be only this one person affected by this issue, everyone else that I've tried sending messages to has responded with no trouble. Is anyone else having any similar issues?

    Retrohacker, Your text messages are too important to be missed! Let's figure this out, together. Are you able to successfully make and receive calls from your friend? Which phone do you have with us? Any new messaging applications or changes that you can recall on the phone since this issue began? Please share details so we can get to the bottom of this for you.  TanishaS1_VZW Follow us on Twitter @VZWSupport  If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • For weeks I have been viewing a doggy day care via their web cam.  This weekend I upgraded to Lion and have been unable to view the center since.  I get an error message for java webcam class not found.  All of my software is up to date--suggestions?

    For weeks I have been viewing a doggy day care center via their web cam.  This weekend I upgraded to Lion and have been unable to view the center.  I get an error message for Java plug-in 1.6.0_29 ....webcam class not found.  Any suggestions on how to fix this?

    Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
    BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
    Regards.

  • I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your

    I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your question?

    Have you not got the music on your computer and/or on backups on, for example, external drives or CDs/DVDs ?

Maybe you are looking for

  • BAPI_GOODSMVT_CREATE - Account Assignment Error

    Hi, I have to issue a material from unrestricted project stock to a reservation on a service order(Txn : IW32 ). I'm performing Goods issue with ref to Reservation. For this I'm using the  BAPI_GOODSMVT_CREATE and passing the following parameters. GO

  • Does GarageBand support Bluetooth output at all?

    I have an iPad running IOS 4.3 when I first tried GarageBand it worked through my Bluetooth jam box speaker But now it doesn't I have tried doing resets etc , but every other sound app works a treat through the jam box , but GarageBand won't. Has any

  • How do I enable the autofill/autocomplete on MAC please?

    It used to work on hotmail login page but somehow this function has been disable and I couldn't get it work again. When I type the first letter of my email add it used to have a drop down option of all of the emails address I key in before, but now i

  • Satellite C650 - graphics driver update

    Hi all i'm new to this forum and i've been trying to update my graphics but i'm not having any luck, can someone tell me how to do this please, the version i have is 8.15.10.2086. I've had my laptop for awhile now but never done an update of the grap

  • School Sync settings with MacBooks

    The Tech Administrator at our school and myself have discovered a hole in the syncing procces. For example I am a student and my computer syncs every week or so. I am also a tech aid and teach a Tech class. So I look through the settings and programs